Home > Practice Real ROUTE Labs with GNS3

Practice Real ROUTE Labs with GNS3

May 8th, 2014 in Lab Sim, LabSim Go to comments

Well, the title said it all. Here are some screenshots of the labs in GNS3:

+ OSPF Sim:

OSPF_Sim.jpg

+ IPv6 OSPF Virtual Link Sim:

IPv6_OSPF_Virtual_Link_Sim.jpg

+ EIGRP OSPF Redistribution Sim:

EIGRP_OSPF_Redistribution_Sim.jpg

+ EIGRP Stub Sim:

EIGRP_Stub_Sim.jpg

+ Policy Based Routing Sim:

Policy_Based_Routing_Sim.jpg

Link to download these ROUTE lab sims:

Download lab fies from digitaltut

Note:

+ For GNS3 Lab sims on digitaltut please use old version of GNS3 (v0.8.3.1 is recommended) so that you can open it.
+ You have to find the IOS by yourself to run these labs. The IOS used in these labs is c2691-adventerprisek9-mz.124-5a. If you have any problems or suggestions about these files please comment here.
+ In real exam, you have to click on host (PC) to access command-line-interface of the router, not the router itself.

Comments
Comment pages
1 2 3 5 672
  1. J4d00g4R
    November 15th, 2013

    thank you very much digitaltut… :)

  2. Angelo
    November 15th, 2013

    you post it , after i took the exam yesterday :(

    anyway i passed :) , and got the same laps shown above

    thank u all

  3. CCNP_Munsta
    November 15th, 2013

    Awesome !

    I started creating this labs by hand myself the other day — at the same time I was thinking..

    “Man, I wonder if someone already has these LABs uploaded online already”

    *SHA-ZAM*

    And here they go =D

  4. sameboatasyou
    November 15th, 2013

    Angelo… how was the exam? Were there any new questions than here? I am appearing for exam tomorrow.. bit nervous. I passed all the 15 quiz here.

  5. pablo
    November 15th, 2013

    Can you guys tell me if the exam changes most of the questions from latest VCE passforsure files?

  6. sameboatasyou
    November 15th, 2013

    what is the password for host of testing router?

  7. gongsta
    November 15th, 2013

    Alternatively to changing the access list on the policy routing lab you can get the host_for_testing to generate http (port 80) traffic with this command:

    telnet 10.1.101.2 80

  8. nahub
    November 16th, 2013

    @sameboatasyou
    cisco

  9. stead
    November 16th, 2013

    thank you very much

  10. Jess
    November 16th, 2013

    Why i get this error when i open the scenarios?? anyone knows how to solve it???

    **Error: errors during loading of the tpology file, please correct them
    Reset error, lost communication with hypervisor?
    ***Warning : Connecting R4 s0/0 to R2 s0/0 resulted in :
    206-unable to create UDP NIO

  11. gbs
    November 20th, 2013

    hi Jess,,,

    Why i get this error when i open the scenarios?? anyone knows how to solve it???
    **Error: errors during loading of the tpology file, please correct them
    Reset error, lost communication with hypervisor?
    ***Warning : Connecting R4 s0/0 to R2 s0/0 resulted in :
    206-unable to create UDP NIO

    1. MAKE SURE YOUR GNS3 IS UPDATED (BECAUSE I USED 0.8.6 (THE NEWEST))
    2. CHECK YOUR ISO 2691…

    ITS WORKS ALL…

  12. Anonymous
    November 22nd, 2013

    @@@ exam pass @@@
    Passed CCNP, in 1 attempt, with a 990! Thanks 9tut. got ACL 1,ACL 2, EIGRP labs. and
    dump i got from website examdump (.) net

  13. Big Man
    November 23rd, 2013

    can anyone show me where to get GNS3 to run the simulations please

  14. mel
    November 24th, 2013

    please help me to download the ios c2691-adventerprisek9-mz.124-5a.

  15. Haki
    November 25th, 2013

    Help me to download the ios c2691-adventerprisek9-mz.124-5a.

    My E-mail address : gocogang@nate.com

    Thank you.

  16. elisha
    November 26th, 2013

    when will cisco revise ccnp

  17. nzr
    November 26th, 2013

    i am doing ospf-eigrp redistribution and i am stuck on the user mode. how can i get in to the router please

  18. Chaitanya kvss
    November 27th, 2013

    Thanks a lot for u r kindest help on this

  19. Chaitanya kvss
    November 27th, 2013

    Hi Elisha,

    The CCNP Course has been revised FROM 4 modules has been reduced to 3 mod CCNP-ROUTE, CCNP-SWITCH, CCNP-T-SHOOT……..

  20. Chaitanya kvss
    November 27th, 2013

    Hi Jiss,

    I have received u r mail thanks a lot for u r kindest help i will catch u in pune on 30 th of this month …….

    -Chaitanya kvss

  21. Chaitanya kvss
    November 27th, 2013

    HSSRP,,,,, VRRP,,,,,,, GLBP,,,,,,L3 SWITCHES,,,,,,L2 2960G SERIES only…….series links,,,,,,
    inter vlan routing…… global configuration mode,,,,,,,,,orange lights and green and red L
    putty soft ware,,,,,,,, hyper link terminal……

  22. Chaitanya kvss
    November 27th, 2013

    Required protocols……….

    and more over the GNS3 has to be upgraded to V8.2.30…..how ever i am usi ng 9.01 V

  23. Anonymous
    November 29th, 2013

    @@@ exam pass @@@

    Passed CCNP, in 1 attempt, with a 990! Thanksstudy material and
    dump i got from website examdump (.) net

  24. can
    November 30th, 2013

    can any one put the configuration for each lab

  25. Anonymous
    November 30th, 2013

    When I try to start the routers on the labs, I get this error message:

    R4: error from server 127.0.0.1:7200: 208-unable to find object ‘R4’
    R1: error from server 127.0.0.1:7200: 208-unable to find object ‘R1’
    R2: error from server 127.0.0.1:7200: 208-unable to find object ‘R2’
    R3: error from server 127.0.0.1:7200: 208-unable to find object ‘R3’

    Any way to fix this?

  26. Anonymous
    December 1st, 2013

    Nevermind, I found the solution. If you have the same issue I had stated above, do the following:

    -Open GNS3. Click on Edit and go to Preferences. Click on Dynamips. See what it says for Base UDP. Mines said 10001.

    -Download NotePad++ (it’s easier). Right click on the lab you want to open, and click “Edit with Notepad++”. At the very top, you will see where it says UDP. Make sure that value is the same as the UDP value has the Base UDP in GNS3.

  27. heefe
    December 3rd, 2013

    Pls anyone write today or very recently
    ..what things do I have to watch out for

  28. Des from Australia
    December 7th, 2013

    I am new to GNS3. I downloaded the image and started GNS3 but I just couldn’t get the console working so that I can change the configuration like I would on Packet Tracer.

    Please help.

  29. Des from Australia
    December 7th, 2013

    You can download ios image from the following link:

    http://www.4shared.com/get/rLxUBg_H/c2691-adventerprisek9-mz124-5a.html

  30. NoUseForAName
    December 7th, 2013

    @Des from Australia

    You may have forgotten to enable the process first (The green PLAY |> button on the top)

  31. SEPP
    December 12th, 2013

    To use these GNS3 labs successfully, make sure the the link to the ios image is that from your pc. edit with notepad ++
    go to edit>ios images >copy the path to the ios image and paste on notepad ++

  32. Anonymous
    December 12th, 2013

    To sit in CCNP exam you should have valid CCNA certificate . Since your CCNA is expired you need to take CCNA again . I got CCNA certification. I studied VALID DUMP from /[ e x a m d u mp [.] ne t ]/

  33. JK From Namibia
    December 12th, 2013

    Hi there
    Can anyone help me get the CCNP Route LAbs in Packet Tracer Format
    As I’m struggling with GNS3
    Looking forward to hear from you

  34. Rahman
    December 13th, 2013

    Hi,Thanks for digitaltut.I have passed CCNP route.
    Best online resources for CCNP route.Concepts are clearly explained.
    Keep it up and continue good work
    Thanks

  35. sofonias
    December 13th, 2013

    packet tracer is not good for CCNP u have to study CCNP in GNS3 i know that there is a lot of problems in GNS3 but as u type exactly what u have type in the lab u can easily pass the exam

  36. Des from Australia
    December 13th, 2013

    Finally, I got GNS3 working. You may want to watch Youtube to learn more about GNS3.

    First, download and install GNS3 on your desktop.
    Second, download ios images.
    Third, execute GNS3, the add ios images via Edit–>ios images and hypervisors
    Forth, add ios image file and then hit the save button. You may click “Test Settings” and close if everything is OK.
    Finally, load your routers and switches, then run it and then click console to configure.
    That’s all. If you are still in doubt, just go to youtube and type GNS3.

  37. Ahmed Mohamed Bassal
    December 16th, 2013

    Can someone help me to download ios c2691-adventerprisek9-mz.124-5a

  38. ServerisInsane
    December 19th, 2013

    Thank you! These are great.

  39. zoha
    December 23rd, 2013

    i WANT TO RUM THESE LABS IN GNS 3 AND I AM HAVING DIFFICULTIES PLZ HELP ME

  40. murali
    December 23rd, 2013

    Help me to download the ios c2691-adventerprisek9-mz.124-5a.

    this is my email address:- muralikrishnapothuru@gmail.com

  41. Dan
    January 6th, 2014

    The website was down for a few days and i was soo scared because i have my test on jan 10th 2014. thanks for getting it back up in time, you’re the best website ever!!!!!

  42. garrincha33
    January 7th, 2014

    I will have all the CCNP videos available though my website which will be available in about a week or so. You can stream them straight though your Ipad or just from the website

    email me at thegarrincha33@gmail.com if you want me to create you an account

    cheers

  43. mohannad.bhat
    January 14th, 2014

    Thanks a lot digitaltut, keep up the great work and thx again :)

  44. Seyi
    January 14th, 2014

    wow… so much encouragement on here… my own exams in a bit, anybody has an advice on how to go about effective study…

  45. elisha
    January 17th, 2014

    i am still to start mine will be in 3months time

  46. Raju
    January 25th, 2014

    can someone please tell me where i can download MPLS pdf and simulations… ???

  47. jafari
    January 31st, 2014

    Hi, I need a CCNP techie in japan and korea for an urgent contract position, kindly let me know ASAP if you are free to handle it or can refer me to any one. (ralphinci@gmail.com)

    Urgent!!!

    Thanks.

  48. Wifi
    February 1st, 2014

    all dumps are legit just sat the exam 890 good luck everyone !

  49. Thom
    February 4th, 2014

    which labs are in CCNP ROUTE exam? thank you

  50. David
    February 5th, 2014

    In ospf sim:

    portland:
    router ospf 1
    area 1 stub
    network 192.168.4.4 0.0.0.3 area 1

    Amani:
    router ospf 1
    area 1 stub no-summary
    network 192.168.4.4 0.0.0.3 area 1

    correct me if I am wrong. Thanks

  51. Pedro
    February 6th, 2014

    I downloaded the GNS3 labs. I am having problem using it. Routers are not starting, even though I have the right IOS Image installed. PLEASE HELP!!! Below is the the error massage I get.

    => Local configuration Policy Based Routing Sim_configs\BorderRouter.cfg cannot be found for router ROUTER BorderRouter, use default base configuration instead
    Local configuration Policy Based Routing Sim_configs\EIGRP_Network_AS_65001.cfg cannot be found for router ROUTER EIGRP_Network_AS_65001, use default base configuration instead
    Local configuration Policy Based Routing Sim_configs\ISP1.cfg cannot be found for router ROUTER ISP1, use default base configuration instead
    Local configuration Policy Based Routing Sim_configs\ISP2.cfg cannot be found for router ROUTER ISP2, use default base configuration instead
    Local configuration Policy Based Routing Sim_configs\Host_For_Testing.cfg cannot be found for router ROUTER Host_For_Testing, use default base configuration instead
    *** Warning: Connecting BorderRouter s0/0 to ISP1 s0/0 resulted in:
    206-unable to create UDP NIO

    *** Error: errors during loading of the topology file, please correct them

    *** Error: 208-unable to find object ‘BorderRouter’

  52. Nicholas
    February 11th, 2014

    Which LABS are in the CCNP Route 642-902 exam?

    Which questions are in the same exam?

    Thanks a lot for the information.

  53. ISO
    February 16th, 2014

    Hi,

    many thanks for the labs, they are very useful to practice before the exam.

    Couple of things to resolve if you want to do so:

    1º) In the redistribution OSPF-EIGRP sim, you have a command applied on R2 that redistributes the eigrp 100:

    router ospf 1
    log-adjacency-changes
    redistribute eigrp 100 <— This one!
    network 192.168.3.0 0.0.0.255 area 24

    Maybe that causes confusion on students because if you redistribute OSPF into EIGRP you are done, you don't need to do anything else and with only one line of configuration, ping begins working between R1 and R4. But I think you should do more things on the exam lab :)

    2º) On the IPv6 and OSPFv3 LAB, is it necessary to put the loopback interfaces into the OSPF areas for the LAB to work. I read a comment saying that before.

    For the rest, many thanks for all. Your help is fantastic to achieve our goals :)

    ISO

  54. PASCAL
    February 21st, 2014

    Am always having this error each time i try to open one of the labs i downloaded here to practice.

    => *** Warning: Could not connect to dynamips server 127.0.0.1:7200

    *** Error: errors during loading of the topology file, please correct them

    can anyone help me out pls
    i need to get to the labs to be able to practise them before reading for my exams
    PLEASE PLEAASE PLEASE I NEED YOUR HELP

  55. Steve
    February 21st, 2014

    Pascal

    Looks like you need to modify the settings in the lab configs.the warning appears to be directly related to port 7200 conflict. Open one of the labs and change it to something else, i.e. 7201

  56. dhl123
    February 23rd, 2014

    can someone sent me the lab?i try download the lab but failed.i need ur help now.please sent me the lab to syahir.izwan@gmail.com.thanks

  57. dhl123
    February 23rd, 2014

    why all the lab dont set the ip?we need to set the ip by our self?

  58. george
    February 26th, 2014

    hello all
    Which LABS are in the CCNP Route 642-902 exam?
    or they are put here just for practice?

  59. elie
    February 26th, 2014

    i can’t load the ios image into gns3.should i convert it to other than .bin to load it in gns3?

  60. Usman
    March 1st, 2014
  61. Bar
    March 6th, 2014

    i don’t get it. how do i use GNS 3?
    in packet tracker – you just click the lab icon you want – and the topology is set.
    how do i use those R1, R2 etc cfg files to open the lab?
    how do i use them?

  62. Bar
    March 6th, 2014

    never mind i got it :)

  63. Anonymous
    March 6th, 2014

    Can anyone tell how to fix this error while using these labs ?

    => Local configuration EIGRP Stub Sim_configs\R4.cfg cannot be found for router ROUTER R4, use default base configuration instead
    Local configuration EIGRP Stub Sim_configs\R2.cfg cannot be found for router ROUTER R2, use default base configuration instead
    Local configuration EIGRP Stub Sim_configs\R3.cfg cannot be found for router ROUTER R3, use default base configuration instead

  64. Mohammed
    March 10th, 2014

    Hi Guys,
    I am appearing for the CCNP Route 642-902. exam in few days, Any final thoughts and Suggestions from the friends out here.Any useful Suggestions and Tips are highly admirable. Thank You.

  65. LABs Valid?
    March 14th, 2014

    Are this LABs still valid? Some folks say they changed today… :(

  66. Karthick
    March 14th, 2014

    Cleared the exam today..all dumps here are valid. no drag drop was asked…thanks a ton to this site

  67. LABs Valid?
    March 14th, 2014

    Karthick, the labs remais the same?? :))) Some Guy said they have changed. Did you take the exam at 14th March? thanks mate.

  68. Sti
    March 22nd, 2014

    Passed my CCNP Route today with 800/1000. All labs are valid and all questions are valid from Igor dump. The new questions are the drag and drop for matching LSA types with Areas, Eigrp dnd, 2 others i cant remember. I used Digitaltut, Igor Dump and CBT Nuggets. Thanks to all

  69. KF
    March 23rd, 2014

    Can anyone send me the link for the IOS c2691-adventerprisek9-mz.124-5a Plzzzz

  70. Ehsan
    March 29th, 2014

    @KF, I can email you the IOS, send me an email to esi_1981@yahoo.com

  71. image??
    March 31st, 2014

    How can i get the c2691 image?

  72. Michael
    April 2nd, 2014

    For Windows 8 users, if you getting errors: can’t connect to the hypervisor on 127.0.0.1 port 7200…. go to GNS3 preferences and make sure your dynamips working – test settings.
    Windows 8 need Winpcap running – http://www.winpcap.org/install/bin/WinPcap_4_1_2.exe
    Set Winpcap compatibility for Windows 7 -> http://microsoftarena.net/winpcap-on-windows-8-how-to/

  73. eng belal
    April 3rd, 2014

    help me to solve Policy Based Routing Sim lab
    plz

  74. jim
    April 3rd, 2014

    labs are not loading in gsn 3, error “nonexistent device r3”. i dont know why. i have downloaded the IOS as well. i m selecting the correct IOS but it is not working.

  75. jim
    April 3rd, 2014

    WORKING FINE NOW. ACTUALLY I HAD MULTIPLE INSTANCES OF GNS OPEN :D.. closed all of them and reopened. works like charm .

  76. Alhasan
    April 13th, 2014

    Many thanks DIGTUT

  77. Anonymous
    April 15th, 2014

    hi, can any one plesae send me the Latest CCNP-ROUTE 642-902 Dumps in PDF format on Sonuchoudhari1990@gmail.com. i am planning to give the exam in the next month

  78. Adee
    April 15th, 2014

    when trying to Run the GNS3 receiving this error message.

    R4: lost communication with server 127.0.0.1:7200
    R1: lost communication with server 127.0.0.1:7200
    R2: lost communication with server 127.0.0.1:7200
    R3: lost communication with server 127.0.0.1:7200

    I have changed the UDP value to 10001 but still the error pops up, any suggestions and i have also changed the image path.

  79. Raza
    April 17th, 2014

    hi, can any one plesae send me the Latest CCNP-ROUTE 642-902 Dumps in PDF format on raza0312@gmail.com. i am planning to give the exam in this month.
    Thanks

  80. redistribution
    April 17th, 2014

    please i open the lab but then #sh runn
    i canot find any configuration even ip add of interfaces
    is this the real case in the exam

  81. Anonymous
    April 22nd, 2014

    can you guys please forward me the latest dumps to ultracoel@yahoo.com
    please let me know where I can download the IOS images that I may need.

  82. Emmaculate
    April 25th, 2014

    May please forward me the latest dumps to emmaculate_mpofu@yahoo.com

  83. Katy Woodward
    April 28th, 2014

    100% valid 1000 thanks digitaltut. shoutout to kelly & dan

  84. Joy
    April 29th, 2014

    May please forward me the latest dumps to joy_kulangot@yahoo.com
    Thanks a lot!

  85. richard
    April 30th, 2014

    can anyone please send me the ios images c2691-adventerprise at richakwe@outlook.com

  86. Joy
    May 2nd, 2014

    Here is a free CCNP ROUTE study guide! http://www.certificationkits.com/cisco-certification/CCNP-ROUTE-642-902-Exam-Study-Guide/ I hope this helps.

  87. pascal
    May 5th, 2014

    hi, Can someone send me the latest ccnp route dumps and notes to pascalmutulu@gmail.com

  88. Ariel
    May 5th, 2014

    Hi Digitaltut and All, please advise how many ram need at least to install and run GNS3 in the laptop. Your feedback is much appreciated. Thank you.

  89. Anonymous
    May 10th, 2014

    I just passed in my exam today score 990 .thanks to the site study material and updated pdf

    material available hear thanks {{hts.io/5lwaU }}

  90. zohan
    May 12th, 2014

    Help me please.

    I’m getting this error when opening the downloaded topology.

    Warning: using localhost in your topology file is not recommended
    Local working directory /tmp cannot be found for hypervisor localhost:7200, use working directory C:\Users\Gabriel~1.SAL\AppData\Local\Temp instead
    Local working directory EIGRP Stub Sim_working cannot be found for hypervisor 127.0.0.1:7200, use working directory C:\Users\Gabriel~1.SAL\AppData\Local\Temp instead

  91. zohan
    May 12th, 2014

    ^
    nevermind. I figured it out :) I edited the .net file using notepad++ placed my own working directory there and my ios image directory. Its working now.

  92. CCNNPP
    May 12th, 2014

    Does GNS3 need license to run or can i run these files on it without any license??

  93. totko21
    May 13th, 2014

    Hello,

    Can someone send me the latest ccnp route dumps and notes to totiot@gmail.com

    Thanks,

    Tony

  94. Anonymous
    May 14th, 2014

    ;; PASS MY EXAM ;;

    The latest material in pdf is avaiable hear check if you required thanks i cleared the exam
    (( kfc.io/2TX ))

  95. Roy
    May 14th, 2014

    hi, i just finished the route exam, thanks for digitaltut.

  96. Elnur
    May 19th, 2014

    Hi everybody.
    Can someone send me the latest ccnp route and ccnp switch dumps and notes (that working with VCE suite version 1.0.1) to elnur016@gmail.com
    Thanks,

    Elnur

  97. Anonymous
    May 22nd, 2014

    hello
    can someone please send me the link for this IOS image c2691-adventerprisek9-mz.124-5a.

    Thanks

  98. Azeem
    May 23rd, 2014

    Hello Everyone,

    Would anybody please help me in running c2691-adventerprisek9-mz.124-5a in GNS because i am using this IOS image but still giving same error.Would anybody please give me the solution.

    Thanks

  99. Boudcha
    May 23rd, 2014

    Hi please how can t download this labs to put it in my conputer.

  100. Anonymous
    May 26th, 2014

    **** Test Passed *****

    Only one material enough to clear CCNP exam .I tested 3 days back its working thanks
    [[ atshort.com/0YGFv ]]

Comment pages
1 2 3 5 672
  1. No trackbacks yet.