Home > Practice Real ROUTE Labs with GNS3

Practice Real ROUTE Labs with GNS3

May 8th, 2017 in Lab Sim, LabSim Go to comments

Well, the title said it all. Here are some screenshots of the labs in GNS3:

+ OSPF Sim:

OSPF_Sim.jpg

+ IPv6 OSPF Virtual Link Sim:

IPv6_OSPF_Virtual_Link_Sim.jpg

+ EIGRP OSPF Redistribution Sim:

EIGRP_OSPF_Redistribution_Sim.jpg

+ EIGRP Stub Sim:

EIGRP_Stub_Sim.jpg

+ Policy Based Routing Sim:

Policy_Based_Routing_Sim.jpg

Link to download these ROUTE lab sims:

Download lab fies from digitaltut

Note:

+ For GNS3 Lab sims on digitaltut please use old version of GNS3 (v0.8.3.1 is recommended) so that you can open it.
+ You have to find the IOS by yourself to run these labs. The IOS used in these labs is c2691-adventerprisek9-mz.124-5a.
+ You also need to modify the image path in the “.net” topology file to match your IOS folder path.
+ In real exam, you have to click on host (PC) to access command-line-interface of the router, not the router itself.

Comments
Comment pages
1 4 5 6 672
  1. meenal
    July 27th, 2019

    hello everyone.

    which lab is coming in exam? do i prepare all lab given the pdf?

  2. Jane
    July 31st, 2019

    Hi,
    Would you send me the latest dump please. janekurr1995 @ gmail . com
    Huge thanks in advance

  3. Anonymous
    August 8th, 2019

    Hi,

    Is the an explanation of how to use GNS3 for lab Sims? I could not use the attached files

  4. lucky 13
    August 13th, 2019

    Any Chances for Updatet Files GNS3 Version 2.x?
    CHeers

  5. VIRL for CCNP
    August 16th, 2019

    Does anyone have these labs in VIRL? Frame relay cannot be done in VIRL, right?

  6. Azteca
    August 28th, 2019

    Hello friends,

    Would you send me the last dump 300-101? My exam will arrive soon and ask me if we can find a reliable source of landfills and if you can share it, please. Thank you

    extreme_z3r0 @ hotmail . com

  7. nickname
    August 28th, 2019

    Hi everyone,

    Can anyone send me ccnp route latest dumps on crousebond (gmail).com

    Thanks!!!

  8. Nickaname
    September 1st, 2019

    can anyone share a more consumer friendly data for the sim lab?

  9. Nicktee
    September 4th, 2019

    Hi, can i check where i can download the old version of GNS3 v0.8.3.1? Is it a safe website?

  10. cesar
    September 4th, 2019

    alguien ha dado el examen 300-101 con este banco de preguntas?
    como le ha ido?

  11. Strycker
    September 6th, 2019

    Hi everyone,

    Could you share latest dumps for ROUTE with me on ztrycker at gmail.com

  12. Lucky
    September 11th, 2019

    Hi guys , any dump for ccnp route exam ?

  13. Anonymous
    September 12th, 2019

    to make lab work after

    1.downloading the image

    2.open the downloaded folder of the sim and change directory to where you saved the image, for example mine C:\Program Files\GNS3\IOS Images\c2691-adventerprisek9-mz.124-5a.bin

  14. Zek
    September 13th, 2019

    Hello,
    If anyone can send me latest Route dumps, that would be great deep_zek @ yahoo.com

  15. rhod
    September 14th, 2019

    can anyone send me latest dumps for {email not allowed}

  16. rhod
    September 14th, 2019

    can anyone send me the latest dumps jersonrhod.cabrera @ gmail.com

  17. Anonymous
    September 14th, 2019

    janine_joshua @ hotmail . co . uk

  18. PleaseStudyDontDump
    September 15th, 2019

    PRB Lab:

    Use ECHO instead of WWW with GNS3

    BorderRouter:

    ip access-list extended ICMPTRAFFIC
    permit icmp any any
    exit
    route-map REDIRECT
    match policy-list ICMPTRAFFIC
    set interface Serial0/0
    exit
    interface FastEthernet0/0
    ip policy route-map REDIRECT

    You can then use show route-map to see how many times the policy has matched your traffic.

  19. J
    September 16th, 2019

    which LABS are in the exam ?

  20. Leo
    September 16th, 2019

    Hi does anybody has theses labs at newer GNS3 labs?

  21. Anonymous
    September 17th, 2019

    just use GN3 1.x, you can convert .net project files and use them without any problems

  22. Syed
    October 6th, 2019

    I downloaded SIMS but i could not see configurations on routers, I mean nothing config already

  23. Neoonus
    October 11th, 2019

    Здесь вы можете заказать копию любого сайта под ключ, недорого и качественно, при этом не тратя свое время на различные программы и фриланс-сервисы.

    Клонированию подлежат сайты как на конструкторах, так и на движках:
    – Tilda (Тильда)
    – Wix (Викс)
    – Joomla (Джумла)
    – WordPress (Вордпресс)
    – Bitrix (Битрикс)
    и т.д.
    телефон 8-996-725-20-75 звоните пишите viber watsapp
    Копируются не только одностраничные сайты на подобии Landing Page, но и многостраничные. Создается полная копия сайта и настраиваются формы для отправки заявок и сообщений. Кроме того, подключается админка (админ панель), позволяющая редактировать код сайта, изменять текст, загружать изображения и документы.

    Здесь вы получите весь комплекс услуг по копированию, разработке и продвижению сайта в Яндексе и Google.

    Хотите узнать сколько стоит сделать копию сайта?
    напишите нам
    8-996-725-20-75 звоните пишите viber watsapp

  24. Neoonus
    October 15th, 2019

    who needs the lasted dump and labs can contact me at: cisco4career(at)gmail(dot)com
    Good luck guys!

  25. ปลาวาฬทราย
    October 29th, 2019

    How to verify each lab?
    Thank you very much.

  26. kt_cisco
    November 28th, 2019

    IPv6 OSPF Virtual Link Sim
    & OSPF Sim

    I got these two in my today exam and passed nearly in the border.
    from Australia.

  27. Mangop
    December 22nd, 2019

    Hi amigos,
    I about to go for my 300-101 exams next month, I would like to use all thus labs. I already download but I couldn’t open it.
    Needs help with, please.
    e – mail : c a b o b o 7 8 @ g m a i l . c o m
    Thanks in advance…

  28. ci5codaddy
    January 13th, 2020

    ci5codaddy at outlook. com

    Could some one do me a solid and send me the most recent valid 300-101 dump pls

  29. Ci5coDaddy
    January 15th, 2020

    @ Mangop I’m having the same issues. You need to be able to either convert the .net file or, import it. You need to import appliance with GNS3 VM configured wih IOS VM. You then need the correct files. I’m still playing around wih it.

  30. Eng C
    February 15th, 2020

    Ci5c0Daddy did you win? can’t open the files

  31. MR eigrp
    February 27th, 2020

    in a linux install gns3 and you can open the files,

Comment pages
1 4 5 6 672
  1. No trackbacks yet.