Share your ROUTE Experience

Hi all !
i have passed the exam 2 days ago in a Pearson Vue center, I have receive my result “Pass” but how many time it take to obtain the official result by Cisco ?

Thanks for help.

do guys think Cisco know about this site?

Hello All,

I took my exam yesterday on 19/1/2012 and passed with a score of a 953.
a lot of LABs came in my exam : ALL labs except EIGRP Stub !
the rest of questions from the latest P4S ( either PDF or VCE )
there was about 5 questions related to IPv6
and BGP also had a lot of questions, overall it was a good exam and especially a very good course as it contains a lot of thinking and u feel that u use ur mind a lot ( exactly opposite to SWITCH )

Anyways greeting to all of u and the best of luck :)

please I need ccna actual questions in real your exam. those who passed recently

Scheduled to take the exam tomorrow. I hope this 642-902 is the hardest one out of the 3 for ccnp ceritification.

Thanks all for the comments on your experience. Helps to boost the confidence in having the right material for studying.

Passed 642-902 on 20 Jan (965).

The exam experience was pretty dreadful. As I recall many of the commands I thought I needed for the scenarios wouldn’t work (eg source address for ping or traceroute). I don’t think I have ever seen a less impressive simulator engine (eg the routes in the OSPF lab took for ever to appear).

The labs were EIGRP redistrib (made to look different) , OSPF v3 virt link, PBR and OSPF totally stubby/incomplete config. All from Digitaltut.

Questions mostly from nonenity. A random one from a yet another multipoint v6 to v4 tunnel method not in the books I looked at. A big thank you for a great effort, nonenity. It is appreciated.The Wendell Odom exam certification library book is excellent. It sent me to sleep many times but I found it very helpful.

Thanks G-shock

@g-shock thanks for the dumps..

Can someone please provide the pdf for latest routing dumps.

dumps for Routing…

http://www.4shared.com/office/6Ld0-V2V/642-902_AMPdeck_v2.html

pass today Jan 21 with (906) everything still valid with Actualtests 6.2. got all 5 labs and 1 d&d (eigrp)

you got 5 labs? then you are a lucky man =)

You have implemented mutual route redistribution between OSPF and EIGRP on a border router.
When checking the routing table on one of the EIGRP routers within the EIGRP routing domain,
you are seeing some, but not all of the expected routes. What should you verify to troubleshoot
this problem? Select the best response.
A. The border router is using a proper seed metric for OSPF.
B. The border router is using a proper seed metric for EIGRP.
C. The administrative distance is set for OSPF and EIGRP.
D. The missing OSPF routes are present in the routing table of the border router.
E. The subnet keyword on the border router in the redistribute OSPF command.

ans is E.

I am thinking if B can be a right choice too.

Please explain this ,thanks in advance.

Q 36 in pdf

Refer to the exhibit.
A partial routing configuration is shown. Complete the configuration so that only the default
network is redistributed from EIGRP 190 into EIGRP 212. Which ACL statement completes the
configuration correctly? Select the best response.
A. access-list 100 permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
B. access-list 100 permit ip host 0.0.0.0 any
C. access-list 100 permit ip any host 0.0.0.0
D. A default-network cannot be redistributed between routing processes.
Answer: C

why not B?

QUESTION NO: 38
You want the redistributed EIGRP AS 10 routes to have an administrative distance of 121 when
they appear as RIP routes in the routing table of A1. Which command should you use on a router
to accomplish this goal?
Select the best response.
A. redistribute eigrp 10 metric 121
B. redistribute rip metric 121
C. default-metric 121
D. distance 121 10.1.1.6 0.0.0.0

Answer: D

i think D is typed wrong,should be written like this….distance 121 10.1.1.8 and wildcard mask

should this not be the network id from eigrp domain
correct me if i am wrong.

QUESTION NO: 42 PDF

Refer to the exhibit.
Which statement about dynamic routing protocols for this network is true?
Select the best response.
A. No dynamic interior routing protocol can summarize as shown.
Cisco 642-902 Exam
“Pass Any Exam. Any Time.” – http://www.actualtests.com 42
B. Unless configured otherwise, EIGRP would automatically summarize the prefixes as shown
inthe exhibit.
C. With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at
the specified summarization points.
D. The IP address design lends itself to OSPF .Each summarizing router would be an ABR,
summarizing to the next area in the address hierarchy.
Answer: C

I have seen in one dump the correct ans is A.please tell me which one is correct..A or C.

Please explain

QUESTION NO: 54 PDF
Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not
show R2 as a neighbor and does not accept routing updates from R2. What could be the cause of
the problem?

A. The no auto-summary command has not been issued under the EIGRP process on both
routers.
B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.
C. EIGRP cannot exchange routing updates with a neighbor’s router interface that is configured
with two IP addresses.
D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary
address.
Answer: D

QUESTION NO: 62
Which three statements are true about EIGRP route summarization? (Choose three.)
A. Manual route summarization is configured in router configuration mode when the router is
configured for EIGRP routing.
B. Manual route summarization is configured on the interface.
C. When manual summarization is configured, the summary route will use the metric of the largest
specific metric of the summary routes.
D. The ip summary-address eigrp command generates a default route with an administrative
distance of 90.
E. The ip summary-address eigrp command generates a default route with an administrative
distance of 5.
F. When manual summarization is configured, the router immediately creates a route that points to
null0 interface.
Answer: B,C,F

other dump ans is B,E,F

which one is correct?

Correct answer is B,C,F.
E is incorrect, the the summary-address does NOT generate a _default_ route.

I passed on 18th Jan 2012. Exam was almost from the same 322 Qs of Actual Test. Only 1 question was new that was a drag and drop question for all LSA Type (Which LSA type will correspond which kind of area). One more thing to mention that in “EIGRP OSPF Redistribution Sim”, it is clearly mentioned that R1 needs to choose best path to R4. So it should be via R2->R3->R4 instead of R2->R4 becuase connection between R2 to R3 and R3 to R4 is 100000 Kbit bandwidth. while connection from R2 to R4 is serial connection of just 1540 Kbit bandwidth. There is an extra configuration that i’ve applied on R2 to accomplish this goal. it is following:

R2(config)#router ospf 1
R2(config-router)#distance ospf inter-area 171

Confirm the action by running traceroute from R1 to 172.16.100.1/24 network. It should go via R2->R3->R4.
this goal can also be achieved by doing the following configuration on R2 instead the above one:

R2(config)#router eigrp 100
R2(config-router)#distance eigrp 90 110

ccnp and @CCNP,

You should not use the ip summary-address eigrp summarization command to generate the default route (0.0.0.0) from an interface. This causes the creation of an EIGRP summary default route to the null 0 interface with an administrative distance of 5.

This was picked up from
http://www.cisco.com/en/US/docs/ios/12_0/np1/configuration/guide/1ceigrp.html

So i think it DOES create a default route with an AD of 5.

answer should be BEF

Q54.
Q. Does EIGRP support secondary addresses?

A. EIGRP does support secondary addresses. Since EIGRP always sources data packets from the primary address, Cisco recommends that you configure all routers on a particular subnet with primary addresses that belong to the same subnet. Routers do not form EIGRP neighbors over secondary networks. Therefore, if all of the primary IP addresses of routers do not agree, problems can arise with neighbor adjacencies.

This was picked up from
http://www.cisco.com/en/US/tech/tk365/technologies_q_and_a_item09186a008012dac4.shtml

@CCNP
You have implemented mutual route redistribution between OSPF and EIGRP on a border router.
When checking the routing table on one of the EIGRP routers within the EIGRP routing domain,
you are seeing some, but not all of the expected routes. What should you verify to troubleshoot
this problem? Select the best response.
A. The border router is using a proper seed metric for OSPF.
B. The border router is using a proper seed metric for EIGRP.
C. The administrative distance is set for OSPF and EIGRP.
D. The missing OSPF routes are present in the routing table of the border router.
E. The subnet keyword on the border router in the redistribute OSPF command.

The answer here cannot be B, if the redistribution had wrong metrics, NONE of the routes would be present in the EIGRP table. The question says SOME were present and some were not.

Can anyone share the CCNP route dumps ?

@actuarial,thanks for the time you spent for replying.i understand now.please explain the q below.thanks.

QUESTION NO: 42 PDF

Refer to the exhibit.
Which statement about dynamic routing protocols for this network is true?
Select the best response.
A. No dynamic interior routing protocol can summarize as shown.
B. Unless configured otherwise, EIGRP would automatically summarize the prefixes as shown
inthe exhibit.
C. With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at
the specified summarization points.
D. The IP address design lends itself to OSPF .Each summarizing router would be an ABR,
summarizing to the next area in the address hierarchy.
Answer: C

I have seen in one dump the correct ans is A.please tell me which one is correct..A or C.

Please help me to understand.thanks

QUESTION NO: 70
Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology
table, before learning topology data from neighbors? (Choose two.)
A. By adding all subnets listed by the show ip route connected command
B. By adding the subnets of working interfaces over which static neighbors have been defined
C. By adding subnets redistributed on the local router from another routing source
D. By adding all subnets listed by the show ip route static command
Answer: B,C
Explanation:
Other

please explain:

QUESTION NO: 81
An administrator types in the command router ospf 1 and receives the error message:
“OSPF process 1 cannot start.” (Output is omitted.) What should be done to correctly set up
OSPF? Select the best response.
A. Ensure that an interface has been configured with an IP address.
B. Ensure that an interface has been configured with an IP address and is up.
C. Ensure that IP classless is enabled.
D. Ensure that the interfaces can ping their directly connected neighbors.
Answer: B

can you utilize google please to check for the right answer???????

@Anonymous
Q:81
the point of this question is about ospf router-id as you know , ospf process need router-id
the router-id will selected by on of:
1-manual configure
2-highest loopback
3-highest physical ip add. which is active
without router-id the ospf process will not start .

@ all

in eigrp lab
ip summary-address on int s0/0 r4 is that :

R4(config-if)#ip summary-address eigrp 123 10.2.0.0 255.255.240.0

correct or false….

thanks for clarification.

Hi @all,
I am interested in Cisco Arch material, any ideas?

Passed CCNP Route today with a score of 988.
Thanks everyone and and special thanks to Digitaltut.

is there anyone here who has link for route labs and DnD ?

valid dumps:

http://www.4shared.com/office/3jaPGF2N/642-902_AMPdeck_rev3.html

thanks g-shock,, i’ll check it out,,

Abhishek:

Can you comment on the exam?

What are the sims that appear?

On the issues, which dump you used?

I take the test this week and thank you for your information.

please clarify if D is correct or C.I think correct ans is D.correct me if I am wrong.thanks

Which statement is true about EBGP? Select the best response.
A. An internal routing protocol can be used to reach an EBGP neighbor.
B. The next hop does not change when BGP updates are exchanged between EBGP neighbors.
C. A static route can be used to form an adjacency between neighbors.
D. EBGP requires a full mesh.
Answer: C

Passed exam today with 976

Had a thing in the OSPF Stub sim – after configuring the STUB on one router and Stub No summary on the second one , the Ping from the first Router wasn’t successful to the loopback interface on the 3rd router.

Wrote a comment on that during the SIM.

Refer to the exhibit.
Which statement about dynamic routing protocols for this network is true?
Select the best response.
A. No dynamic interior routing protocol can summarize as shown.
B. Unless configured otherwise, EIGRP would automatically summarize the prefixes as shown
inthe exhibit.
C. With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at
the specified summarization points.
D. The IP address design lends itself to OSPF .Each summarizing router would be an ABR,
summarizing to the next area in the address hierarchy.

The answer here has to be C, A is wrong because EIGRP is a dynamic routing protocol that can summarize anywhere on your network. So A cannot be correct.

please clarify if D is correct or C.I think correct ans is D.correct me if I am wrong.thanks
Which statement is true about EBGP? Select the best response.
A. An internal routing protocol can be used to reach an EBGP neighbor.
B. The next hop does not change when BGP updates are exchanged between EBGP neighbors.
C. A static route can be used to form an adjacency between neighbors.
D. EBGP requires a full mesh.

D cannot be the Answer. because the compulsory rule of having to be in a Full mesh is for iBGP neighbors and not eBGP neighbors.

BGP uses the AS_PATH attribute for loop detection. If a router sees its own AS number in a BGP advertisement, the advertisement is dropped. IBGP routers have the same AS number so the AS number cannot be used for loop detection. IBGP neighbors will not advertise prefixes learned from one IBGP neighbor to another IBGP neighbor; therefore, a full mesh is required.

Because eBGP peers are always in different AS. It does not require a FULL Mesh

@bishoy

Yes that is Correct. But in the lab they dont specify you to be precise with your summarization. So why go through the hassle of Subnetting when you have the easier option :)

But you are correct you can use that summary-address command too.

thanks actuarial.I think,i am a little confused with….ibgp needs not be directly connected for neighbor relation..thats right..so fully meshed is different thing than directly connected.Ebgp has to be directly connected for neighbor relation.

Can nebody share me the CBT nuggets link for CCNP ROUTE..

QUESTION NO: 110
Refer to the exhibit.

The partial configuration for an OSPF ASBR and an Area 0 ABR is shown. Assume the OSPF
configurations throughout the network are operable. Which statement about these configurations
is true?
Select the best response.
A. The ASBR route-maps are basically useless, because there are no deny prefix-lists.
B. LSA Type 5s will not be received by the ABR from the ASBR.
C. The OSPF backbone will not learn any RFC 1918 addresses.
D. The matched prefix-list addresses will be given a metric of 255, which is essentially
unreachable.
Answer: C

where RFC 1918 come from.Am I missing something here?
help please

these questions are so annoying……. these suppose to share experience in Routing exam

Dear All
I hav passed CCNA today, preparing for CCNP now, Kindly tell me link for the Latest dumps

@SK

RFC 1918 is the name given Private addresses.

If you look at the the question it is first assigning a tag of 255 to the prefix list on the ASBR(which lists the private addresses)

Then look in the ABR, it is denying all routes that match the tag 255.

Hence we can conclude that the OSPF backbone will not learn the private address(RFC 1918) which are denied by the prefix list on the ABR

Hope it helped. (by the way i have my exam tomorrow) wish me luck :)

I hav passed CCNA today, preparing for CCNP now, Kindly tell me link for the Latest dumps for ROute exam

Passed CCNP Route with a 941 using nonentity dump and digitaltut! The practice sims and the explanations here were a HUGE help! Thanks!

@actuarial,all the best for ur exam.thanks for helping me with my doubts.please keep in touch even after passing the exams.

@annonymous,why are you disturbed if someone is helping others with the exam prep…………..

@Parsad

Download actualtests 642-902 vce file including 316 question from Visit http://www.inetstudies.com. In the meanwhile I’ll try to get remaining 6 question because there are total 322 questions listed on actualtests.com website.

inetstudies.com is totally free. Just create a free account there and start downloading.

hi guys, in taking cisco exams, is there rules on dates or days interval after taking an exam? like for example,,if i took exam today will it be okay if i take another exam the next week? lets assume i passed my exam today???,,coz if you fail you need to wait 180 days before you can retake the exam but how about if you passed the exam will be okay to take another different exam in just a shot period???,,is it allowed????,,thank you very much

Hello Everyone ,

Which one is the latest dumps nonentity 338 q or 322…and is there anything else apart from these 2 dumps that comes in exam..

Thanks in advance

just arrived home from the testing center. i passed the implementing cisco ip routing exam with 918/1000. Thanks for this site.

All the 5 labs were included on today’s exams. I struggle on the redistribution and ipv6 topics for I was not able to review the said topics thoroughly. But thank God, I still managed to pass the exam.

I had sleepless nights for two weeks studying and working. I watched all the ROUTE videos by Jeremy, Thanks Jeremy!

thanks everyone!

@GKR

I got OSPF virtual link,Redistribution, OSPF sim,Policy based routing.
Actual test dumps is valid.
Best of Luck bro

is it not supposed to be router ospf 24 command on R2 and router ospf 34 command on R3?

@ naeem…from where i can download the latest dumps?

@ abhishek
actualtest 322 dump is valid ?
the labs are exactly same from this site ??

@ dag
actualtest 322 dump is valid ?
the labs are exactly same from this site ??

Hello everybody, I am from Tunisia the cradle of the arab spring. I have passed the exam today and got 1000/1000 (I’m so happy). I had 50 questions (all from the latest ActualTests and Nonentity : 0 new questions), 4 labs : Redistribution (it was the latest question in the exam : question n° 50), virtual links (the ping command doesn’t work), OSPF lab , and PBR lab . I had some pain with the keyboard (it write strange characters) but I managed to overcome this obstacle. Overall it was an easy exam but the difficulty is in the preparation of this exam because you must definitely understand the concepts and not learn the responses by heart.
I would like to thank this site, the people who have shared their experience before me because I learnt a lot from them, and a last thank to those who have made the labs in GNS3 because practicing the labs is VERY VERY importants.

Thank you all, and now the CCNP Switch !!!!

@Tunisian man
congrats….kindly send me the link for both dumps ..m new at this site

@Tunisian man
congratulation , very nice score , my exam on 2/2/2012 .

@Umair

Here is the link, you will find a lot of exams :

http://www.examcollection.com/642-902.html

@Tunisian man

About the questions, which showed more?

Thanks

@ tunisian man
which one is valid ? nonentity ?

ActualTests and Nonentity Dumps are enough to pass the route Exam ??????????

You must practice both of them, there is a lot of common questions between them two.

@Tunisian man. Thanx

@Tunisian man
And what about lab ?
Is there is any changes in Exam lab or any other configuration in lab
or the lab is same as digitaltut.com

There isn’t any change in the labs except for the name of the routers and the subnets used.

Passed today 1000/1000 :)

I agree with Anonymous, this section is only to share our exam experience, but i even believe in helping others. Maybe the site moderators can add a section call ASK YOUR QUESTIONS! It will help.

To all my fellow Route studiers, although i appreciate the hard work the this site and Dump makers are doing, its not going to benefit you all if you just pass by dumping. If you really want to be a network engineer and have a busy life on the side, u can still learn by working hard. This is how i studied for this exam

1. CBT – Nuggets
2. Official Certification Learning Guide – Wendell Odom (Read once)
3. Foundation Learning (Read Once)
4. Noentity + DigitalTUT (The first time i did the questions i scored 890 (because of what i did above)

Then i polished my knowledge in the questions i got wrong. And today i found the exam to be Fair and passed with maximum points.

I will not be visiting this site any more, but you are most welcome to query me on any CCNP Route related questions on my email iam.polymath (at) g mail .com

Cheerioz !

@ Umair
I just have checked inetstudies dot com, they have uploaded actual tests 322 question which are valid. available for free download at inetstudies dot com

@Actuarial

Yes you are 100% right. For a network engineer, he/she must be strong in ideas and concepts for which I think inetstudies is a better option. I passed my route exam using their own written practical guides. I must say awesome. You dont you have a look on that.

For theory, above mentioned books are good enough but CCNA Study guide by Todd Lammle and Cisco Press Self Study Intro Exam Certification guides can also help to get massive knowledge.

Sorry, my mistake:

Y dont you have a look on that.

can any1 send me link for cbtnuggets for ccnp route.. at sajrocks@gmail.com thnks

Hi EVeryone ,

Pass today with 957 Marks,
All DUmps are valid from Non Equity V 7 and Actual Test 6.2
Thank You Digital TUT and the group members for making life easy.

@actuarial,i tried to send u a mail,but it says invalid address,please provide the valid email id or give me the full name of the foundation book.thanks.

@Anonymous,

You seem to be the only one not getting through to my email. I have already received numerous emails seeking assistance. You can try it again on iam.polymath(at)gmail.com

To answer your question , this is the exact book i was talking about;

Implementing Cisco IP Routing (ROUTE) Foundation Learning Guide
Author : Diane Teare

Cheers & Goodluck!

ASALAM THANKS TO ALLAH TODAY I HAVE PASSED IN Implementing Cisco IP Routing (ROUTE) EXAMS SCORING 883/1000 ON YESTERDAY & THANKS ALL FRIENDS FOR PRAYING..PREPARED THIS DUMPS & YOU WILL GET MIN 883 MARKS THE LINK =
http://www.4shared.com/office/J1iP8WU_/642-902.html

guys i have 322q actual test dumps for exam are these same as p4s dumps ????
n also the latest to prepare ????

if yes n if required i can again search the link n post here…

Which is the Latest dumps for Exam

Please Share the latest 642-902 route exam Dumps

My exam on 1-2-2012

Thanx.

Which is the Latest dumps for Exam

Please Share the latest 642-902 route exam Dumps

My exam on 1-2-2012

Thanx

@ shahid congrats dear..all the qs frm dump u posted? n what abt the sim ?

@ naeem,, how many sims were in xam ? all from this site?

@ shahid… how many sims were in xam ? all from this site?

@umair, yes, all the lab sims in the sites were included on my exams on the 24th. Master it. Learn it by heart and practice! Practice! Practice!

Which is the Latest dumps for Exam

Please Share the latest 642-902 route exam Dumps

My exam on 1-2-2012

Thanx
.

the exam fee for each CCNP paper is 200$ ? total of 600 for 3 papers right ?

Which EIGRP packet statement is true? Select the best response.

a)On high-speed links, hello packets are broadcast every 5 seconds for neighbor discovery.
b)On low-speed links, hello packets are broadcast every 15 seconds for neighbor discovery
c)Reply packets are multicast to IP address 224.0.0.10 using RTP <————————–
d)Update packets route reliable change information only to the affected routers.Reply packets are used to send routing updates.

The answer is D but I thing that the correct one is letter ''C'' because EIGRP it uses RTP and 224.0.0.10 is it's Multicast address…tnx fpor your help =)

off topic but does anyone have any dumps for JNCIA JN0-101 ??? please , thanks!

@Hector
C is wrong Ans. :
1-reply packet by RTP are unicast ,uses the Reliable Transport Protocol (RTP) to handle the guaranteed and reliable delivery of EIGRP packets to neighbors.
2- Hello and ACK packets are unreliable. Reply, Query, and Update packets are reliable.

Got it thanks xpan =)

plz tell me how many Drag and Drop Questions available in route exam and what is the pass marks?

@Anonymous
Passing Score: 790 and Drag and Drop Questions are variable may be only one or more

@msxy

thanks bro this will certainly help! :)

@gfalconx

you are welcome ! :p