Share your ROUTE v2.0 Experience

@Poo
Which of the labs did you get in your exam.

leop9600 is a fake and MAD person

@Exam in Tuesday

1 RIPv2 how long a static route remains if the point to point interface is down..
a 30s
b 60s
c 180s
d 240s
answer: D

2. Which condition prevents the establishment of a DMPVN tunnel between two spokes?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.
ANSW: C

3 Which routing protocol searches for a better route through other autonomous systems
to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector
answ :C

4 Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters
ANSWER:A,C,E

5. In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
ANS: B

IMHO!

@Asmaa…..if you go few pages back, you will find Pass93X shared all links including DnDs.

@Ghauri @Anonymous,

As per my expericnced i got lot of new questions that i did not heard it before but every person has a different questions and experience in that exam.

I tried to remember other question but could not remember it As i mension in early in this forumsabout questions TCP-UDP ,NTP, NAT64, Cef, DHCPV6 in details.i think got abreviation like MPP & Copp i could not remember exatlly and even i don’t know what that mean. i’m not 100% sure Kikavich all in one plus enough to pass but whatever materials of route exam you have memories it because we don’t know what differen kind of question we’ll get it in exam.

I’ll thinking to retake my exam i’m doing my best to memories it so please please anyone has update information or meterial please share with everyboday so easy to pass route exam.

Appriciate it.

3 Labs:-EIGRP Stub ,EIGRP OSPF Redistribution,OSPF
Drag & Drop :-GRE feature,Frame relay LMI,ACL,uRPF(last 2 remember later)

In advance Thank you

Doublle post from earlier

DnD in below w. 477Q , Kikavich corrected

https:// drive . google.com/drive/folders/1UyTdhAq3k2qn-pOwZ41Bpv-FmA7rmKgu

Kikavich
https:// drive . google.com/drive/folders/1UyTdhAq3k2qn-pOwZ41Bpv-FmA7rmKgu
All in one
https:// www . dropbox.com/s/oqd7dept3tdg1vy/all%20in%20one.vce?dl=0
jazzy + prince
https:// drive . google.com/drive/folders/1zPsB1wW8QtA8ThFgI_qKBhSXr8reOJKx
https:// drive . google.com/drive/folders/1fKVLXnpMrjLgxMna8wkazos1YV09XzVZ

Just remove the spaces

I took on friday and passed,, same questions on here just some different way of asking questions and multiple choice. People dont just memorize and expect to go to teh test and get same exact question,, go over materials and learn the material. I got 96x and the material here on tut are very good. I want to thank Mario for all help he has given his infomration was getting mirrored over and over again. Bigup for my friend Mario

Which program do you use in windows to open the VCE files?

IPv2 how long a static route remains if the point to point interface is down..
a 30s
b 60s
c 180s
d 240s
answer: D

2. Which condition prevents the establishment of a DMPVN tunnel between two spokes?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.
ANSW: C

3 Which routing protocol searches for a better route through other autonomous systems
to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector
answ :C

4 Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters
ANSWER:A,C,E

5. In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
ANS: B

IMHO!IPv2 how long a static route remains if the point to point interface is down..
a 30s
b 60s
c 180s
d 240s
answer: D

2. Which condition prevents the establishment of a DMPVN tunnel between two spokes?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.
ANSW: C

3 Which routing protocol searches for a better route through other autonomous systems
to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector
answ :C

4 Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters
ANSWER:A,C,E

5. In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
ANS: B

IMHO!
IPv2 how long a static route remains if the point to point interface is down..
a 30s
b 60s
c 180s
d 240s
answer: D

2. Which condition prevents the establishment of a DMPVN tunnel between two spokes?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.
ANSW: C

3 Which routing protocol searches for a better route through other autonomous systems
to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector
answ :C

4 Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters
ANSWER:A,C,E

5. In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
ANS: B

IMHO!

4 Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters

could this be BCE? from website mentioned is filter by prefix list and distribute list and tags
didn’t really talk about implement offset list

Hi

If anyone has a link of free.VCE. please share with all viewer.

helo0

@tep and others….
Please don not take my answers to above questions as FINAL….Please research nd go through the topics material online….the vast majority still not able to passed is because we rely on to posts next random person pasted as answer!
@tep ….as you said , the answer could well be BCE!

5. In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
ANS: A
From digitaltut (old):
https://www.digitaltut.com/ospf-questions-9
“Explanation

When OSPF adjacency is formed, a router goes through several state changes before it becomes fully adjacent with its neighbor. The states are: Down, Attempt, Init, 2-Way, Exstart, Exchange, Loading, and Full.

Suppose two routers are just turned on and want to establish DR\BDR adjacency. Both are in DOWN state, each router sends a multicast Hello and moves to INIT state. After a router has both received a Hello and verified that all the required parameters agree, the router lists the other router’s RID in the Hello message as being seen. When a router receives a Hello that lists its own RID as having been seen by the other router, the router can transition to 2-Way state.

(Reference: CCNP ROUTE 642-902 Official Certification Guide)”

HI,

recently cisco changes the Cisco CCNP 300-101 I have updated dump 100% valid, only 248 Q with DND and labs. only for $150, I will Share 5 few questions which are not available in the any of the dump which posted in the 9 tute.

HI,

Please find the link for new questions…

https : // files. fm/ f/ tv27dadz (remove the space)

All of these questions are included in the dump, what are you on about???

Hi,

The people those who needed the DUMP contact me through,

{email not allowed}

Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters

answers are a, b and e…. prefix lists can not be used to filter rotes by itself, they can be used inside of distribution lists…

@doka

youare wrong about ospf Q , and the question also confusing

in lan network will found that dr/bdr reach 2way state with all other routers(brothers will be just neighbors for dr and bdr and not adjacency )

and the bdr and dr reach FULL state wchich called adjacency.

so because the Q has no choice as 2way ,the best anwser here is the EXstart state (where the ecection of dr and bdr happen)

dear ALL,

relax,

just passed the exam with 86x.
it was easy and all pdf ( Kikavich corrected + jazzy + prince ) file are still valid.
a lot of question was from the list i already sent (go back couple of pages back .
no new questions.

D&D
1- COPP MMP
2- AAA authorization
3- GRE feature
4- GRE configuration.

LAB
1- EIGRP stub
2- eigrp ospf redist
3- ospf ipv6

Wrong @doka
Remember, although HELLO pkt received at INIT but with no routers IDs.
so how could we talk about adjancy at this stage ?
For me, EXSTART is the correct one.

.
thanks you all and wish you all the best.

now iam taking CCDA,

any advice? :)

@DOKA

D. Loading State is the correct answer.

Congrates @Hallfawi!

@Hallfawi
Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters

is A,B,E or A,C,E pls ?

by the way dears,

WR or copy runing config is not working in the exam.

just get the needed lay out and press next.

@Hallfawi
There is a other question.
Database exchange –> loading State
I think dzzzis correct. Answer B

@Routeontheway

the question came in the exam

it is ABE

@Hallfawi

Congrats on the pass man! I am a lurker on the forum, haven’t been active at all. Gonna enter the exam this weekend, wish me luck! :)

@SASLAN

good luck. jazi kikavich not included in 477 kikavich June updated and the one i pasted earlier are enough.

questions are the same but some times they are adding extra choice.

@SASLAN

good luck. jazi kikavich not included in 477 kikavich June updated and the one i pasted earlier are enough.

questions are the same but some times they are adding extra choice.

@Hallfawi

I am doing the “all in one” and I’ve copied the question on p 148-152 to a file and have been doing them. Actually, I finished the book and INE courses, so I think passing won’t be a problem. Hope all goes well. Good luck with the CCDA my friend :)

Türkmisiniz?

Nerden bildin lan :D

Which two mask you perform to enable a point-to-point Frame Relay connection

a. Configure the encapsulation type
b. Disable inverse ARP
c. Enable inverse ARP
d. Configure static address mapping

Answer:A

Hallfawi the Ans wrong

Kalbim hiseti lan :)

My friend = kardeśim. Siz kardeśim çok kulaniyorsunuz.

Vay be))) Sen Azerimisin? Siz soyledin de, merak ettim :)

Abi su soyledigin sorularin sayfasini atsana bana ve ya bir link falan. Dumplar digil, yazdin ya I posted a few pages ago falan. Sorun digilse tabii ki

AAA dnd asks about tcp,tacacs,udp,radius,authentication,authorization and accounting

Got ipv6 feature d&d

Mpp &copp has all theoptions as the dd that syn provides but with two different options for mpp

Got all other questions posted in the forum

Which two mask you perform to enable a point-to-point Frame Relay connection

a. Configure the encapsulation type
b. Disable inverse ARP
c. Enable inverse ARP
d. Configure static address mapping

MARIO PLS CAN U ANS THIS QUESTION

How to open VCE files in Windows? Please HELP

@Anonymous i chose A for that on the test.

for mpp/copp make sure that you have the following:

CoPP:
+ Deals with protection against DOS attacks
+ Uses QoS
+ Assists with packet forwarding by decreasing the load

*** keyword for copp is DOS, QOS and forwarding.. the rest you can add to MPP

for AAA

it has the following

accounting. — logging of access etc
authentication — user authentication
authorization. — don’t remember
tacacs — tcp
radius — udp

IPV6 security feature:

ipv6 traffic filtering — it filters traffic at teh interface level
— it supports tagged acls

ipv6 access classes — it controls traffic to and from the router
— it requires the destination address for inbound traffic to be a local address
— it filters management traffic

same labs, eigrp redistribute, ospf & eigrp stub

it’s been a fun journey here. i’m moving on to SWITCH now. i’ll try to come back here when i can. thanks everyone

Thanks @ Mario. All the best in your switch study and exam

F u c k all of you !

https://www.examcollection.com/certification-training/ccnp-configure-and-verify-loop-prevention-mechanisms.html

Hallfawi
Congrats. did you use kikavich DND to study? some of the questions and answers in that material are not clear.

thnx @Mario
Passed my switch last year….I will probably catch you somewhere in Tshoot, may b..have fun fella!

Passed my exam today.Thanks to everyone here for your help. There were a few more new questions about 7 i has never seen before on anywhere but lots from kikavich and 447 too .i had the eigrp ospf redistribution, eigrp stub and ospf sim labs. And thanks again Mario, for this. they were there too

CoPP:
+ Deals with protection against DOS attacks
+ Uses QoS
+ Assists with packet forwarding by decreasing the load

*** keyword for copp is DOS, QOS and forwarding.. the rest you can add to MPP

for AAA

it has the following

accounting. — logging of access etc
authentication — user authentication
authorization. — don’t remember
tacacs — tcp
radius — udp

IPV6 security feature:

ipv6 traffic filtering — it filters traffic at teh interface level
— it supports tagged acls

ipv6 access classes — it controls traffic to and from the router
— it requires the destination address for inbound traffic to be a local address
— it filters management traffic

same labs, eigrp redistribute, ospf & eigrp stub

also the kikavich Drag and drops was very helpful.. all the best all.. Off to Tshoot