Share your ROUTE v2.0 Experience

@Maik Schulz, I’ve seen the passleader dumps and it’s all in the nnnnetworking dumps 757q… do you see the nnnetworking dumps?

hello guys

can u plz send me latest pdf to pass exam route 300-101

MY EMAIL :
hotjessica1992 at gmail.com
thanks

hello guys

can u plz send me latest pdf to pass exam route 300-101

MY EMAIL :
hotjessica1992 at gmail.com
thanks

Hey guys, I think I found a mistake on the 195q. The simlet:
What type of route filtering is occuring on R6?
A. Distribute-list using an ACL
B. Distribute-list using a prefix-list
C. Distribute-list using a route-map
D. An ACL using a distance of 255

On 195q says its C, but its an ACL in there not a route map, if you check (take off the spaces) https:// vceguide. com/you-have-been-asked-to-evaluate-how-eigrp-is-functioning-in-a-customer-network/

You will see the A is the correct, and is the only that makes sense to be honest. Can someone confirm?

OHH NOOOOO!!! I see what’s wrong :( you cannot randomize answers on VCE because the correction always gives you the same letter, if I don’t randomize it then the ACL comes in A. and not in C. and then it is correct. But if you randomize answers the ACL will be on the C. and you get the correction saying it should be A. (It’s a printscreen that’s why the answer is always the same) DON’T USE RANDOM ANSWERS IN VCE!!!

I have passed the exam and got 96X
195Q is still 100% valid, and I mean 100%
Sim: EIGRP OSPF Redistribution, OSPF Sim, EIGRP Stub.
Dnd; framerelay ( a new one ) , ACL , AAA , Framerelay
Thank you digitut and nneettwwoorrkkiinngg.

Cleared my route exam just now!
Labs: eigrp sim, ospf sim, eigrp ospf redistribution
D&D: acl, frame-relay, uRPF, GRE

195 Q still valid! I Thought I can perfect the exam!!
Kudos to DIGITALTUT and NNEETTWWOORRKKIINNGG !

@Heeyah

when I run the VCE, it asks password and i dont have that? do you have this issue?

hello guys

can u plz send me latest pdf to pass exam route 300-101
195q
MY EMAIL :
hotjessica1992 at gmail.com
thanks

NEW QUESTION 683
What happens when two EIGRP peers have mismatched K values?

A. The two devices are unable to correctly perform equal-cost routing.
B. The two devices fail to perform EIGRP graceful shutdown when one device goes down.
C. The two devices fail to fryjom an adjacency.
D. The two devices are unable to correctly perform unequal-cast load balancing.

Answer: C

NEW QUESTION 684
Which two features were added in MSCHAP version 2? (Choose two.)

A. Mutual authentication between peers.
B. Using the MD5 hash for stronger security.
C. Using three-way handshakes for authentication.
D. Ability to change an expytired password.
E. Backward-compatibility with MSCHAP version 1.

Answer: AD

NEW QUESTION 685
Whescn an EIGRP router discovscers a new neighbor, which packet type does the router send to help the neighbor build its topology table?

A. Replies
B. Requests
C. Updates
D. Queries

Answer: C

NEW QUESTION 686
After configuring RIPng on tytwo routers that are connected via a WAN link, a network engineer notices that two routers cannot exchange routing pdated.What is the reason for this?

A. Either a firewall between the two routers or an ACL on the router is blocking UDP 521.
B. Either a firewall between the two routers or an ACL on the router is blocking TCP 520.
C. Either a firewall between the two routers or an ACL on the router is blocking TCP 521.
D. Either a firewall between the two routers or an ACL on the router is blocking UDP 520.

Answer: A

NEW QUESTION 687
A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?

A. Global
B. Router
C. Interface
D. IPv6

Answer: C

NEW QUESTION 688
Which three algoritzx hms can you configure with the ip cef load-sharing algorithm command? (Choose three.)

A. per-packed
B. Tunnel
C. per-destination
D. Universal
E. Per-source
F. Include-ports

Answer: BDF

NEW QUESTION 689
Which tecnology supports overlapping IP address on a single interace?

A. policy-based routing
B. VRF-Lite
C. On-Demand Routing
D. QoS

Answer: B

Hello ALL,
i complete my ccnp today, finally with TSHOOT(95x)
22 Questions over all, 2 Simlets, 10 tickets, 10 MCQ.
THX to the networktut team and all supporters.

@GotIT :)
@Thanks to digitaltut and nneettwwoorrkkiinngg

Hi there, can someone can explain why it’s correct i OSPF EIGRP redistribution ?!?

for R2: BW 1544 kbit/s DELAY 20000 -> 1544 2000 255 1 1500
for R3: BW 100000 kbit/s (=100Mbit/s) DELAY 100 -> 100000 10 255 1 1500

the delay have to be 10 or 100 on R3 ? and why?

Hi all,

I failed the 77X exam, I studied only 195q dumps and LABs. You could say that only about 50% were 195q, the rest were DAY-X.

Is it possible that you have updated exams?

Regards!

Algunas de las preguntas que me han aparecido son estas, y no estan en 195q

Regards!!

NEW QUESTION 684
Which two features were added in MSCHAP version 2? (Choose two.)

A. Mutual authentication between peers.
B. Using the MD5 hash for stronger security.
C. Using three-way handshakes for authentication.
D. Ability to change an expytired password.
E. Backward-compatibility with MSCHAP version 1.

Answer: AD

NEW QUESTION 687
A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?

A. Global
B. Router
C. Interface
D. IPv6

Answer: C

NEW QUESTION 688
Which three algoritzx hms can you configure with the ip cef load-sharing algorithm command? (Choose three.)

A. per-packed
B. Tunnel
C. per-destination
D. Universal
E. Per-source
F. Include-ports

Answer: BDF

Some of the questions that have appeared to me are these, and they are not in 195q

Regards!

NEW QUESTION 684
Which two features were added in MSCHAP version 2? (Choose two.)

A. Mutual authentication between peers.
B. Using the MD5 hash for stronger security.
C. Using three-way handshakes for authentication.
D. Ability to change an expytired password.
E. Backward-compatibility with MSCHAP version 1.

Answer: AD

NEW QUESTION 687
A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?

A. Global
B. Router
C. Interface
D. IPv6

Answer: C

NEW QUESTION 688
Which three algoritzx hms can you configure with the ip cef load-sharing algorithm command? (Choose three.)

A. per-packed
B. Tunnel
C. per-destination
D. Universal
E. Per-source
F. Include-ports

Answer: BDF

@fungset

Check the eigrp ospf redistribution section, that will explain it to you better than I do.
Hurry take the exam while 195q semptember still valid.

Hii all,

Can someone share with me 195q file? I only have the netwooorliinnggg dump.

Thanks
BR

@ Thanks to digitaltut and nneettwwoorrkkiinngg

i have the exam tomorrow :)
so i want to be sure about that LAB.

i read in the premium member account but i can’t understand…did you follow the digitaltut guide ?

@Bastion, Do you mean that 195q is not valid?

I passed my exam with score 9xx

All i study is DigitalTut and nneettwwoorrkkiinngg dumps. All questions were from nneettwwoorrkkiinngg dumps.

During my study, i noticed, there are some discrepancy in some of answers (for a same question) between DigitalTut and nneettwwoorrkkiinngg dumps (may be 3 or 4 questions only) but it doesn’t matter because probability to get those questions in your exam is very less. just make sure you study well nneettwwoorrkkiinngg dumps and you can easily pass this exam.

Thank you so much Digitaltut and nneettwwoorrkkiinngg for your help!!!. with your help i am able to renew my certification.

Thanks again and God bless you!! Good luck to everyone

@Yank

hi Yank <! congratulation !

can you share your experience with labs and DnD ? there new frame relay ? you are a premium member of digitaltut?

@MM

No, all the questions are in the material provided by neetwoorking, I’m just saying that I focused more on 195q, but I’ve had about 15 questions from the dump (125q NEW QUESTIONS).

Regards!!

Hi all,

Does anyone know how often the exams change?

Regards!!

@Bastion

What sims did you have? Good info on the 125q questions, I will study up, exam in 2 days!

@Bastion

Can you elaborate on which questions from the 125 new section? Most in there are partials and repeats of other questions from the 195….

Thank you Sophie

Awesome Simulator

Device R1 has 1 Gigabit and 10 Gigabit Ethernet interfaces,Which command do you enter so that takes full advantage of OSPF costs?

A.R1(config router)#auto-cost reference-bandwidth 10000
B.R1(config route-map)#set metric 10000000000
C.R1(config if)#ip ospf cost 10000
D.R1(config router)#auto*cost reference-bandwidth 10000000000
E.R1(config if)# ip ospf cost 100000000
F.R1(config route-map)#set metric 10000

A or C?

Hello All,

Please do Dumps from SPOTO, 91 questions from Prince and 447 question from a PDF that I found on Networktut.
For DND –
Virtual Circuit Message, Simple Flow control etc came
Reflexive, Extended, Standard , Time based DND came
LOOSE mode and Strict mode came
IPV6 Traffic filtering and IPV6 access class came
MSS,KEEPALVIE, mGRE came

Simulations –

1) Redistribution of OSPF and EIGRP where we have both were straight through or crossover Cables.
2) EIGRP STUB AND SUMMARIZATION

Questions –
1) Please do VRF questions (3 of them came)
2) There were 2 new BGP questions –
What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast

Answer: B C
3) There were 3 TCP/UDP port questions, i got them wrong, but one was –
Either a frewall betweeo the twi riuters ir ao ACL io the riuter is blickiog IP priticil oumber
47.
Another TCP question had something to do with PORT 521
4)Which feature or technology is supported by stateful NAT64 ?
Answer – VRF
5)Which of the following situations results in routing loops?
Answer – when you have multiple ports of redistribution.

NOTE – Do not sweat much on IPV6 questions,I wasted much time on it. Do Frame – Relay questions too.

QUESTION 1
A network engineer has been asked to ensure that the PPPoE connection is established and authenticated
using an encrypted password.
Which technology, in combination with PPPoE, can be used for authentication in this manner?
A. PAP
B. dot1x
C. IPsec
D. CHAP
E. ESP
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation/Reference:
Explanation:
With PPPoE, the two authentication options are PAP and CHAP. When CHAP is enabled on an interface and a
remote device attempts to connect to it, the access server sends a CHAP packet to the remote device. The
CHAP packet requests or “challenges” the remote device to respond. The challenge packet consists of an ID,
a random number, and the host name of the local router. When the remote device receives the challenge
packet, it concatenates the ID, the remote device’s password, and the random number, and then encrypts all
of it using the remote device’s password. The remote device sends the results back to the access server,
along with the name associated with the password used in the encryption process. When the access server
receives the response, it uses the name it received to retrieve a password stored in its user database. The
retrieved password should be the same password the remote device used in its encryption process. The
access server then encrypts the concatenated information with the newly retrieved password–if the result
matches the result sent in the response packet, authentication succeeds. The benefit of using CHAP
authentication is that the remote device’s password is never transmitted in clear text (encrypted). This prevents
other devices from stealing it and gaining illegal access to the ISP’s network. http://www.cisco.com/c/en/us/td/
docs/ios/12_2/security/configuration/guide/fsecur_c/scfathen.html
QUESTION 2
A corporate policy requires PPPoE to be enabled and to maintain a connection with the ISP, even if no
interesting traffic exists.
Which feature can be used to accomplish this task?
A. TCP Adjust
B. Dialer Persistent
C. PPPoE Groups
D. half-bridging
E. Peer Neighbor Route
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation/Reference:
Explanation:
A new interface configuration command, dialer persistent, allows a dial-on-demand routing (DDR) dialer profile
connection to be brought up without being triggered by interesting traffic. When configured, the dialer
persistent command starts a timer when the dialer interface starts up and starts the connection when the timer
expires. If interesting traffic arrives before the timer expires, the connection is still brought up and set as
persistent. The command provides a default timer interval, or you can set a custom timer interval.

don’t want to start another 2 page debate, but:

6.In which two areas does OSPF send a summary route by default ?

A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal

answer CD or DE – correct answers would be ABDE

A – gets Type 3 (contains Inter-area routes/summary)
B – gets Type 3 & Type 5
C – none – only default route (technically type 3, but it only contains a default route to its ABR)
D – gets Type 3 (contains Inter-area routes/summary and a default route to its ABR)
E – gets Type 3 & Type 5

Summary route is not the same as a default route.

So the question doesn’t make sense and is probably wrong, it should be something like:

“In which two areas does OSPF send a default route ?” or “In which two areas does OSPF send a default route in place of a summary ?”

Answers: CD

@all

what about 125q ? from premium ?

QUESTION 1
When a packet is denied by an IPv6 traffice filter, which additional action does te device perform??
A. It generates a TCP Fin bit and sends it to the source.
B. It scans the rest of the ACL for a permit entry matching the destination.
C. It generates an ICMP unreachable message for the frame.
D. It creates a null route for te destination and adds it to the route table.
Correct Answer: C

QUESTION 2
Which problem can be caused by latency on a UDP stream?
A. The device that sends the stream is forced to hold data in the buffer for a longer period of time.
B. The overall throughput of the stream is decreased.
C. The device that receives the stream is forced to hold data in the buffer for a longer period of time.
D. The devices at each end of the stream are forced to negotiate a smaller window size.
Correct Answer: C

please………
what are the correct answers for:

1- which condition prevents the establishment of a DMPVN tunnel between two spokes ?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. the two spokes are behind different PAT devices
D. the two spokes have different tunnel keepalive settings.

2- Which two statements about ICMP unreachable messages are true?(Choose two
A. They are sent when a route to the destination is missing from the routing table
B. They can be enable and disable on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a poriton of the original data so that the source can identify the process that generated the message

Please do Dumps from SPOTO, 91 questions from Prince and 447 question from a PDF that I found on Networktut.
For DND –
Virtual Circuit Message, Simple Flow control etc came
Reflexive, Extended, Standard , Time based DND came
LOOSE mode and Strict mode came
IPV6 Traffic filtering and IPV6 access class came
MSS,KEEPALVIE, mGRE came

Simulations –

1) Redistribution of OSPF and EIGRP where we have both were straight through or crossover Cables.
2) EIGRP STUB AND SUMMARIZATION

Questions –
1) Please do VRF questions (3 of them came)
2) There were 2 new BGP questions –
What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast

Answer: B C
3) There were 3 TCP/UDP port questions, i got them wrong, but one was –
Either a frewall betweeo the twi riuters ir ao ACL io the riuter is blickiog IP priticil oumber
47.
Another TCP question had something to do with PORT 521
4)Which feature or technology is supported by stateful NAT64 ?
Answer – VRF
5)Which of the following situations results in routing loops?
Answer – when you have multiple ports of redistribution.

NOTE – Do not sweat much on IPV6 questions,I wasted much time on it. Do Frame – Relay questions too.

QUESTION 6
For troubleshooting purposes, which method can you use in combination with the debug ip packet command to
limit the amount of output data?
A. You can disable the IP route cache globally.
B. You can use the KRON scheduler.
C. You can use an extended access list.
D. You can use an IOS parser.
E. You can use the RITE traffic exporter.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Explanation/Reference:
Explanation:
The “debug ip packet” command generates a substantial amount of output and uses a substantial amount of
system resources. This command should be used with caution in production networks. Always use with the
access-list command to apply an extended ACL to the debug output. http://www.cisco.com/c/en/us/support/
docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn- troubleshoot-00.html

Found the 195. Page 217. Second file from left. September ver. 2.1

https:// drive.google. com/drive/folders/ 1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

don’t want to start another 2 page debate, but:

6.In which two areas does OSPF send a summary route by default ?

A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal

answer CD or DE – correct answers would be ABDE

A – gets Type 3 (contains Inter-area routes/summary)
B – gets Type 3 & Type 5
C – none – only default route (technically type 3, but it only contains a default route to its ABR)
D – gets Type 3 (contains Inter-area routes/summary and a default route to its ABR)
E – gets Type 3 & Type 5

Summary route is not the same as a default route.

So the question doesn’t make sense and is probably wrong, it should be something like:

“In which two areas does OSPF send a default route ?” or “In which two areas does OSPF send a default route in place of a summary ?”

Answers: CD
/

QUESTION 1
A network engineer has been asked to ensure that the PPPoE connection is established and authenticated
using an encrypted password.
Which technology, in combination with PPPoE, can be used for authentication in this manner?
A. PAP
B. dot1x
C. IPsec
D. CHAP
E. ESP
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation/Reference:
Explanation:
With PPPoE, the two authentication options are PAP and CHAP. When CHAP is enabled on an interface and a
remote device attempts to connect to it, the access server sends a CHAP packet to the remote device. The
CHAP packet requests or “challenges” the remote device to respond. The challenge packet consists of an ID,
a random number, and the host name of the local router. When the remote device receives the challenge
packet, it concatenates the ID, the remote device’s password, and the random number, and then encrypts all
of it using the remote device’s password. The remote device sends the results back to the access server,
along with the name associated with the password used in the encryption process. When the access server
receives the response, it uses the name it received to retrieve a password stored in its user database. The
retrieved password should be the same password the remote device used in its encryption process. The
access server then encrypts the concatenated information with the newly retrieved password–if the result
matches the result sent in the response packet, authentication succeeds. The benefit of using CHAP
authentication is that the remote device’s password is never transmitted in clear text (encrypted). This prevents
other devices from stealing it and gaining illegal access to the ISP’s network. http://www.cisco.com/c/en/us/td/
docs/ios/12_2/security/configuration/guide/fsecur_c/scfathen.html
QUESTION 2
A corporate policy requires PPPoE to be enabled and to maintain a connection with the ISP, even if no
interesting traffic exists.
Which feature can be used to accomplish this task?
A. TCP Adjust
B. Dialer Persistent
C. PPPoE Groups
D. half-bridging
E. Peer Neighbor Route
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation/Reference:
Explanation:
A new interface configuration command, dialer persistent, allows a dial-on-demand routing (DDR) dialer profile
connection to be brought up without being triggered by interesting traffic. When configured, the dialer
persistent command starts a timer when the dialer interface starts up and starts the connection when the timer
expires. If interesting traffic arrives before the timer expires, the connection is still brought up and set as
persistent. The command provides a default timer interval, or you can set a custom timer interval.

Hello All
Pass 301-101 today 195 question are still valid .
3 Labs eigrp sim , ospf sim and eigrp ospf redistribution .

thanks nneettwwoorrkkiinngg & digitaltut

@Elisa
correct answer
Which adverse circumstance can the TTL feature prevent?

A. routing loops
B. DoS attacks
C. link saturation
D. CAM table overload

B
Which value determines the amount of traffic that a network path can hold in transit?

A. route cache setting
B. maximum window size
C. bandwidth delay product
D. MSS

C

Which two statements about ICMP unreachable messages are true? (Choose two)

A. They are sent when a route to the destination is missing from the routing table
B. They can be enabled and disabled on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a portion of the original data so that the source can identify the process that generated the message

AC

Refer to the exhibit.

interface gigabitethernet 2/0/0
vnet trunk
ip address 192.168.1.1 255.255.255.0
vnet name cisco
Which effect of this configuration is true?

A. It designates the interface as a GRE tunnel endpoint
B. It configures 802.1q trunking on the interface
C. It designates the interfaces as an EVN trunk
D. It removes VTP from the interface

C

Company is deploying a multicast application that must be accessible between sites, but must not be accessible outside of the organization. Based on the scoping requirements, the multicast group address for the application will be allocated out of which range?

A. FF00:/16
B. FF0E:/16
C. FF02:/16
D. FF08:/16

D

Which two causes of latency are true? (Choose two)

A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilization of a link

CD

When OSPF is forming an adjacency, in which state does the actual exchange of the information in the link-state database occur?

A. INIT
B. loading
C. exstart
D. exchange
B

NANCY IS ((((((SCAMMER)))) THEY ARE PROVIDING OLD MATERIALS AND GET MONEY I LOST MY MONEY FOR THEM SO PLEASE DONT JOIN THEIR LINK AND BE AWARE FROM THEM..

I passed the exam this morning !

I revised the dumps posted by Nancy above

My score : 985/1000

Time spent : 1h10

Good luck to everyone

@yoyo
@goodonya

All material is in neetwoooorking dumps (good job)

195q (valid september)
125q (NEW QUESTIONS)

I recommend you to study “”all”” neetwooorking dumps for no surprises, including (DAY-X). I didn’t do it that way, that’s why I failed the exam.

I’ll try again in two or three weeks.

What do you recommend, to try again in 3 weeks or in 10 days (time required by cisco for second attempt)?

Regards!!

Translated with http://www.DeepL.com/Translator

All material is in neetwoooorking dumps (great job)

195q (valid september)
125q (NEW QUESTIONS)

I recommend you to study “”all”” neetwooorking dumps for no surprise, including (DAY-X). I didn’t do it that way, that’s why I failed the exam.

I will try again in 2 or 3 weeks.

What do you recommend, to try again in 3 weeks or 10 days (time required by cisco for second attempt)?

Regards!!!

I also recommend the study in Digitaltut to be up to date with new questions.

Regards!!

Hi there.
PASSED TODAY WITH 889.

Studied question from 195q valid september. All the question in the exam was from there.
No new question!
LaB all from digitaltut.

Can someone else confirm Bastion concerns?

@Bastion,

Perhaps you used first 195q from PDF file? Then yes, you could fail it. 195q are in ORDER only in VCE program. In PDF file there are everywhere (not hierarchical order). The 3 questions you mentioned (MSCHAP, RIPng and CEF) are in 195q.

Congratulations!

Just passed the 300-101 exam yesterday (25/Oct/2018)!

There are many new questions appeared in my actual 300-101 test.

Old version 300-101 dumps are NOT valid now, DO NOT learning them.

I learned the newest Pass Leader 300-101 dumps with 739q version, all new questions are from PL!

Good luck, all!

Congrats! Just passed the 300-101 exam yesterday (25/Oct/2018)!

There are many new questions appeared in my actual 300-101 test.

Old version 300-101 dumps are NOT valid now, DO NOT learning them.

I learned the newest Pass Leader 300-101 dumps with 739q version, all new questions are from PL!

Good luck, all!