Share your ROUTE v2.0 Experience

can someone send me 477q dump at duluniyi @ gmail . com

@tomcet
@chucks
@ lazy.

can you send the 477Q to me please. duluniyi @ gmail . com (both VCE and PDF)

Thanks bro

Please, can anyone tell me, How can I get 477Q?

hi every one
please can you tell me which dump must to study
i am new in ccnp
and i dont know from which source should i study
also is digital tut is enough or not?
thanks

@rrr
I got most q from q477. So our objective to get all the right answers from this d u m p.

OldTimer
please from where can i download this dumpq477
can you add it here please

attention new commenters…
1 advice: learn how to see previous comments. You will find something you need there…

hi every one
please can you tell me which dump must to study
i am new in ccnp
and i dont know from which source should i study
also is digital tut is enough or not?
thanks

hi gus,
@tomcet
@chucks
@ lazy.

Please Can anybody send me the latest dumps 477,
planning ro take exam next week

thanks

gus my email is teosoup live com

thanks

Just Passed !!!

PBR, EIGRP Stub, Eigrp Sim,

(Ensure you read all notes for sims and evals from digitut) Certain commands can trip you up.

DND IP DHCP Delay, Frame Relay LMI, AAA

Some questions old Some questions new.

I only used Digitut and a Udemy Route Course ….. Study hard guys. I’m pushing for CCNP before June. On to SWITCH

Other Jules from CCNA … Catch up ;)

@Jules_Jenkins Congrats on the route exam delighted for you.
Best of luck in the SWITCH and TSHOOT.

@ Jules_Jenkins —-

Congrats man!!! i see you bro!!! lol Yeah i’m almost there
now you making push much harder lol

hi Guys,

Could you help me with the answers to these questions??

Q390

Which two configurations can a PPPoE client support? (Choose Two)
A. Eight c\lents are configured on a single CPE.
B. The client is connected to multiple hosts over DMVPN
C. The client is Installed on the same network device as the server.
D. The client ls connemng over an ATM PVC
E. The client ls installed on a nadve IPv6 network.

Q394

which two protocols are required for DMVPN? (Choose two)

A. IPsec
B. PPTP
C. DGRE
D. NHRP
E. Open VPN

Q418

Which OSPF area prevent LSA type 4, LSA type 5? (Choose two)
A. Stub Area
B. Totally Stubby Area
C. Not-So-Stubw Area
D. Totally Not-So Stubby Area

Q465

Which two statements about uRPF are true? (Choose two)
A. The Keywofd any can be used with: both stridt rinode and loose m! bdle.
B. Strict mode may drop legitimate trafFi:,
C.-lt is enabled globally.
D. Strict mode is most awropriate for networks With awmmetric r. outing.
E. Loose mode may raffic when asy nmetric routing occurs on the network
F. It is enabled on a erface basis.

Q467

In SNMP v3, which security level provides encryption of the data?
A. authMember
B. noAuthNopriv
C. authNopriv
D. authpriv

please send me 477 Q my email is {email not allowed}

https://www.dropbox.com/s/b7mzl82ihy0v214/300-101%20%281%29.pdf?dl=0123

delete the last 123!!!!

477 Q dumps

@dr.
390- A. Eight clients are configured on a single CPE. B.The client is connected to multiple hosts over DMVPN
Q394 – MGRE NHRP
418 – stub and totally stub area
467 – authpriv

the 477q dumps is on page 89, go back you will see the link dropped in the comments

.
@Dr some of the questions you are asking have been answered already. I answered some and some others too on the last page, so go back and read through.

@tomcat

TOMCAT can you sent me too updated dump please

Thank you in advance

tarok　ashima　1210@gma　il.com(space delete)

is someone working on correcting the 477Q?

Guys, I know this is hardly the place. Just wanna ask who has materials similar to this for ITIL v3, not sure if PeopleCert changed or added questions. If you have stuffs, please send them over my yahoo mail. Thank you and God bless!

my.referrals @ yahoo.com

hey guys, dumps are on page 89, DIG IT!

the purpose is to correct the 477q answers, ’cause it has some wrong as well.

feel free to ask and answer :)

@Dan_2_One:
I think everyone is waiting for the others to correct the dump, so someone has to start is :)

@OldTimer :
did u pass already?

please send me 477 q dump my email anmarjasem61 @ gmail.com

@help me

read my fn post 2 above yours!

dont you just ask, read!!!

For Question 424 in NEW DUM 477

ANSWER IS A,B 100 % is CORRECT

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/xe-3s/nat-xe-3s-book/iadnat-stateful-nat64.pdf

Please help to find out the correct answer which are given below :
————————————————————————–

Q1. Which feature can filter information at the interface level?
A. Conditional Debugging
B. Local Logging
C. Prefix-List
D. Syslog

Answer: ?

Q2. Refer to the exhibit, Which option is one of the effects of entring this

command on a Cisco IOS Router, with no addional logging configuration?
(Image shows this Command “Loggin Console 7”)

A. Debug messages can be seen on the ocnsole by enabling “terminal monitor”
B. The Router can expereince high CPU utilization.
C. Debug messages are logged only on active console connections.
D. A User that is connected via SSH sees level 7 messages.

Answer : ?

Q3. Which Technology is required on an EVN trunk Interface?
A. VRF-Lite
B. IS-IS
C. 802.1q
D. NAT

Answer: ?

Q4. Which statement about NTP authentication is true?
A. The ntp trusted-key command authenticate the identify of a system.
B. The ntp authentication-key command enables NTP authentication.
C. It suppose DES, 3DES, and MD5 authentication.
D. Only one authentication key can be defined at a time.

Answer : ?

Q5. Which command do you enter to filter only routing updates that are spent

through interface GigabitEthernet0/0?

A. R1(config-Router)# no passive-interface GigabitEthernet0/0
B. R1(config-Router)#passive-interface GigabitEthernet0/0
C. R1(config-Router)#passive-interface defaut
D. R1(config-Router)#distribute-list 1 GigabitEthernet0/0 out
F. R1(config-Router)#passive-interface default

Answer: ?

Q6. A Network Engineer has configured NTP on a Cisco router, but the time on

the router is still incorrect, What is the reason for this problem?

A.The router is not syncing with the peer, and the NTP request and responce

packets are not being exchanged.
B. The router is syncing with the peer, and the NTP requirest and Reponce

packets are being exchanged.
C. The router is not syncing with the peer, even though the NTP requrest and

responce packets are being exchanged.
D. The Router is dropping all NTP packets.

Answer: ?

Q7.Which feature is supported with the PPPoE client?
A. DMVPN
B. QoS on the dialer interface
C. MLPPP on the interface
D. Dial-on-demand

Answer : ?

Q8.Which two types of authentication does EIGRP offer (Choose two)
A. Plain text
B. WPA
C. TKIP
D. MD5

Answer : ?

Q9. A senior Network engineer tries to propage to summary route

205.105.201.0/27 to R2 by redistributing static route on R1, but setup is not

working?

A. The Wildcard bit in network Command is incorrect.
B. The Summary route is in the global routing table.
C. The Route target is missing
D. The redistribute command is in the wrong address family.

Answer : ?

Q10. A Network engineer tneeds to verify IP SLA operations on an interface

that shows an indication of excessive traffic. Which command should the engineer

use to complete this action?

A. show track
B. Show frequency
C. show reachability
D. Show threshold.

Answer: ?

Q11. Which two statements about NTP stratum are true? (choose Two)
A. The highest stratum level a synchronized device can have is 16
B. Stratum 1 devices receive their time from a peer that is connected directly to

an authoritative time source.
C. Stratum 15 indicates a device that is not synchronized.
D. Stratum 0 devices are connected directly to an authritative time source.
E. Stratum 1 devices are connected directly to an authritative time source.
F. Stratum 2 devices receive their time from a peer that is connected directly to

an authoritative time source.

Answer : ?

Q12. Why is the default route not removed when 172.20.20.2 stops replying to

ICMP echos?

A. The threshold value is wrong
B. The default route is missing the track feature
C. The destination must be 172.30.30.2 for icmp-echo
D. the source interface is configured incorrectly.

Answer : ?

@ Hadis khan

For Q2 I will choose B, because Level 7 is debug mode in which cpu and memory are overhead in production devices so for this I will choose B

@Hadis khan, in my opinion the correct answers are:
Q1. Which feature can filter information at the interface level?
A. Conditional Debugging
B. Local Logging
C. Prefix-List
D. Syslog

Answer: not sure

Q2. Refer to the exhibit, Which option is one of the effects of entring this

command on a Cisco IOS Router, with no addional logging configuration?
(Image shows this Command “Loggin Console 7”)

A. Debug messages can be seen on the ocnsole by enabling “terminal monitor”
B. The Router can expereince high CPU utilization.
C. Debug messages are logged only on active console connections.
D. A User that is connected via SSH sees level 7 messages.

Answer : B

Q3. Which Technology is required on an EVN trunk Interface?
A. VRF-Lite
B. IS-IS
C. 802.1q
D. NAT

Answer: A

Q4. Which statement about NTP authentication is true?
A. The ntp trusted-key command authenticate the identify of a system.
B. The ntp authentication-key command enables NTP authentication.
C. It suppose DES, 3DES, and MD5 authentication.
D. Only one authentication key can be defined at a time.

Answer : not sure

Q5. Which command do you enter to filter only routing updates that are spent

through interface GigabitEthernet0/0?

A. R1(config-Router)# no passive-interface GigabitEthernet0/0
B. R1(config-Router)#passive-interface GigabitEthernet0/0
C. R1(config-Router)#passive-interface defaut
D. R1(config-Router)#distribute-list 1 GigabitEthernet0/0 out
F. R1(config-Router)#passive-interface default

Answer: B

Q6. A Network Engineer has configured NTP on a Cisco router, but the time on

the router is still incorrect, What is the reason for this problem?

A.The router is not syncing with the peer, and the NTP request and responce

packets are not being exchanged.
B. The router is syncing with the peer, and the NTP requirest and Reponce

packets are being exchanged.
C. The router is not syncing with the peer, even though the NTP requrest and

responce packets are being exchanged.
D. The Router is dropping all NTP packets.

Answer: C

Q7.Which feature is supported with the PPPoE client?
A. DMVPN
B. QoS on the dialer interface
C. MLPPP on the interface
D. Dial-on-demand

Answer : D

Q8.Which two types of authentication does EIGRP offer (Choose two)
A. Plain text
B. WPA
C. TKIP
D. MD5

Answer : A and D

Q9. A senior Network engineer tries to propage to summary route

205.105.201.0/27 to R2 by redistributing static route on R1, but setup is not

working?

A. The Wildcard bit in network Command is incorrect.
B. The Summary route is in the global routing table.
C. The Route target is missing
D. The redistribute command is in the wrong address family.

Answer : A

Q10. A Network engineer tneeds to verify IP SLA operations on an interface

that shows an indication of excessive traffic. Which command should the engineer

use to complete this action?

A. show track
B. Show frequency
C. show reachability
D. Show threshold.

Answer: A

Q11. Which two statements about NTP stratum are true? (choose Two)
A. The highest stratum level a synchronized device can have is 16
B. Stratum 1 devices receive their time from a peer that is connected directly to

an authoritative time source.
C. Stratum 15 indicates a device that is not synchronized.
D. Stratum 0 devices are connected directly to an authritative time source.
E. Stratum 1 devices are connected directly to an authritative time source.
F. Stratum 2 devices receive their time from a peer that is connected directly to

an authoritative time source.

Answer : E and F

Q12. Why is the default route not removed when 172.20.20.2 stops replying to

ICMP echos?

A. The threshold value is wrong
B. The default route is missing the track feature
C. The destination must be 172.30.30.2 for icmp-echo
D. the source interface is configured incorrectly.

Answer : depends of the exhibit

@Hadis khan, from your post I can see some new questions. Can you share the new questions with us?

Hadis khan and to Quetzal, some of the answers you dropped are wrong. Its open for discussion
Q1. Which feature can filter information at the interface level?
A. Conditional Debugging
B. Local Logging
C. Prefix-List
D. Syslog
Answer: C, only prefix list is the best answer because its the only viable option that can be used to filter info amongst the others.

Q4. Which statement about NTP authentication is true?
A. The ntp trusted-key command authenticate the identify of a system.
B. The ntp authentication-key command enables NTP authentication.
C. It suppose DES, 3DES, and MD5 authentication.
D. Only one authentication key can be defined at a time
.
Answer : A, NTP trusted key is a way to synchronise between NTP servers and client, without a ntp trusted key clients would synchronize with NTP servers that may have incorrect/ no NTP authentication key

Q12. Why is the default route not removed when 172.20.20.2 stops replying to
ICMP echos?
A. The threshold value is wrong
B. The default route is missing the track feature
C. The destination must be 172.30.30.2 for icmp-echo
D. the source interface is configured incorrectly.

Answer : C.
if there is was a track command attached at the end of a default static route, once the ICMP echo’s fail, PBR will revert to the normal routing table.

since its absent, we have no business with PBR. so B

@Chucks, you said that some of my answers are wrong. Please, tell me, which one is wrong? On Q1, Q4 and Q12 i said “not sure”.

Hi dr,

is the dumps 477 still valid ?
what do you mean delete 123 ?

please help

thanks

@chuck
Q1. Which feature can filter information at the interface level?
A. Conditional Debugging
B. Local Logging
C. Prefix-List
D. Syslog

I’m not sure about prefix-list.
With prefix -list you can filter route.
With conditional debugging you can filter information.

Where are those new questions?

@rrr

Not yet. My exam is on April 3rd. Wish me luck.
Will keep you guys posted.
For now, I compared q477 and dexter d u m p. questions 1-100 have a SAME answer as dexter’s. So most likely the answers are correct. I am still verifying the answers from q101-477 of the 477 d u m p. Not easy and time consuming.

Hi Oldtimer,

Good luck on your exam, I am planning as well for next week

could you please send me 477 dumps ,pdf ,vce ,

teosoup -live-com

thanks

Which option is one way to *MITIGATE* asymmetric routing on an active/active firewall setup for TCP-based connections?
08/09/2017 – by Mod_GuideK 0
Which option is one way to *MITIGATE* asymmetric routing on an active/active firewall setup for TCP-based connections?
A. Performing packet captures
B. Disabling asr-group commands on interfaces that are likely to receive asymetric traffic
C. Replacing them with redundant routers and allowing load balancing
D. Disabling stateful TCP checks ??????

please how can i get dump 477 my exam after 3 days i need it

@kernel

Goodluck to you too.
Just read the previous comments and you will find 477 pdf. Don’t have vce (I believe no one have) but you can edit the pdf to remove answers and practice answering.

Please, please, please, follow website rules:
Posting email is not allowed in the comment section.

i have all dumps i have 5 dumps just dump 477 i dont have so if anyone want to help by get dump 477 q i will help him to get another dumps and this is my email anmarjasem61 @ gmail.com

help me
please can you share us this 5 dumps

Which command do you enter to filter only routing updates that are spent through interface GigabitEthernet0/0?

A. R1(config-Router)# no passive-interface GigabitEthernet0/0
B. R1(config-Router)#passive-interface GigabitEthernet0/0
C. R1(config-Router)#passive-interface defaut
D. R1(config-Router)#distribute-list 1 GigabitEthernet0/0 out
F. R1(config-Router)#passive-interface default

Answer: E

When the passive-interface command is used the router cannot form neighbor adjacencies on the interface, or send or receive routing updates. But, if you want the outgoing routing updates alone be suppressed but the inbound updates continue to be received (and the routers still continue to be neighbors), then use the distribute-list command:

Refer to the exhibit, Which option is one of the effects of entring this

command on a Cisco IOS Router, with no addional logging configuration?
(Image shows this Command “Loggin Console 7”)

A. Debug messages can be seen on the ocnsole by enabling “terminal monitor”
B. The Router can expereince high CPU utilization.
C. Debug messages are logged only on active console connections.
D. A User that is connected via SSH sees level 7 messages.

Answer : C

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-3_7_JA/configuration/guide/i1237sc/s37sml.html

@ank can you pls share a link that says conditional debug is used to filter routes? is new to me

@quetzal, please that was a typo.
I just wanted to say, the questions you didn’t answer

The Enterprice network WAN link has been received several denial of service attacks from both IPv4 and IPv6 sources which three elements can you use to identify an IPv6 packet via its harder in order to filter future attacks? (Choose Three)

A. Traffic Class
B . Source Address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset

I have Multiple Answers,
In first file : Answers : A, C, D
In 2nd File : Answers : B,C, D

Which are correct?

@OldTimer

it must be time consuming, yes…
someone mentioned before that he had many questions from the last 150 of the 477, so maybe it would be more efficient to start with those.
I am not sure, but as I remember I read it after page 85

and of course have a good practice and good luck!
tomorrow I also dig deeper.

Q11. Which two statements about NTP stratum are true? (choose Two)
A. The highest stratum level a synchronized device can have is 16
B. Stratum 1 devices receive their time from a peer that is connected directly to
an authoritative time source.
C. Stratum 15 indicates a device that is not synchronized.
D. Stratum 0 devices are connected directly to an authritative time source.
E. Stratum 1 devices are connected directly to an authritative time source.
F. Stratum 2 devices receive their time from a peer that is connected directly to
an authoritative time source.

*** I think E and F too. agree?

hello i get 477 q dump if anyone need it i will sent it free my email is anmarjasem61 @gmail.com and if you need anything am ready to help you
anmar