Share your ENCOR v1.1 Experience
The new version of the ENCOR v1.1 has come to replace the old ENCOR version so we create the “Share your ENCOR v1.1 Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new version of the ENCOR 350-401 v1.1 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note:
+ The ENCOR 350-401 v1.1 exam include lab sims, multiple choice and Drag drop questions.
+ You can use shortcut command (like “int”, “no sh”, “conf t”…), “tab” and “?” in the simulations of the exam.
+ To get the new CCNP Enterprise certificate, you need to pass this ENCOR 350-401 exam (core exam) and one of the
concentration exam.
Your posts are warmly welcome! Hope you will find useful information here!
Passed Exam. Know all the labs and the New questions 1 to 6. The two-hour exam use one hour or less for slims and the rest for the questions. Few new questions
Good morning, excuse me, where can I find the labs that are coming out? Can someone point them out to me? Thanks
Passed the exam yesterday.
6 labs + 54 questions.
Dumps are valid. There are couple questions that I never saw. But mostly came from v1.1, but there are still some questions from v1.0.
Labs are valid. LACP, OSPF, eBGP,VRF,Netflow,COPP….
Thanks to digitaltut …
sorry,help me, can you write to me on my email where to find the questions and the labs to practice? version 1.1 I don’t understand what it is. Thanks
email: {email not allowed}
excuse me, but how do I find these labs from Dump?
{email not allowed}
@Alessia you´ll need to subscribe for a member, then you will have access all the content of this site also the labs.
Version 1.1 means ENCOR v1.1 Questions (1 to 6) in the right top corner of this page.
Are ENCOR v1.1 Questions – Part 1 to ENCOR v1.1 Questions – Part 6 enough for test
Hi guys,
I need some help please. I need a model /image of the a switch with fastethernet interfaces. I am doing labs (101 CCNP LABS” book, written by Paul Browning) in eve-ng, and the switches I uploaded have gigabitinterfaces and or ethernet interfaces, no fastethernet interfaces.
Thanks in advance for your help.
passed the exam. 6 6 first questions were labs from here: VRF sim 2,Netflow, EBGP sim 2, LACP root Bridge, OSPF summarization sim 2, ACL & CoPP. 54 other questions from part 1-6 and maybe 10 to 15 new. Just study well the labs and good amount of question is enough to pass.
Just pass today lots of new question. My subs is already expired im not sure that was included in Update in Part 7 v1.1
Exam Labs
OSPF /17
LACP
Netflow
BGP 2
CoPP
VRF 2
Passed! Many thanks to Digitaltut!
Completed 6 Labs and 54 questions:
eBGP Neighbor 1 & 2 (different AS numbers)
ACL & CoPP (Telnet)
OSPF Summarization 2 (appeared twice)
OSPF DR/BDR 2
Encountered 2-3 new questions. Most items were covered in v1.1 Part 1-7.
Followed Digitaltut’s recommended approach for exam preparation, with the exception of completing the Big Composite Quiz 10 times—I successfully passed it 5 times in a row instead, while focusing on studying the labs thoroughly.
Hey, thanks sptut. Labs are valid. I passed my exam on 18th of april.
I havr got the followings lab:
Ospf
Vrf
Acl&copp
Ebgp
Lacp
Netflow
Passed Exam today.
Lab
—-
ebgp (address family mode)
ACL – CoPP (ICMP)
OSPF
Netflow – Sim2
VRF – Sim2
Thank you Digitaltut.
Hi @Digitaltut,
What is happening with the questions quizzes?
When trying to take a quiz of 100 questions, I get the error “Error Occurred:error(undefined) error”
What is going on? I have btw a normal subscription.
Thanks!
@Anonymous: We checked but found no problem. Could you please try again?
Passed my exam today.
Labs are exactly same.
ENCOR v1.1 part 1 to 7 are more than enough to pass the exam.
@digitaltut,
still same error: “Error Occurred:error(undefined) error”
So when I click e.g. at “or practice all 100 questions of this part 4 at All ENCOR v1.1 Questions – Part 4” or any other part and I click at submit, it comes back with that error.
I tied to remove cash etc, and reset the browser, and even tried another browser, same issue.
Anyone else please can confirm?
@digitaltut,
Weird, it works now.
I failed the exam. If I retake it, how much will the questions have changed?
@digitaltut
If I study all the questions related to one topic (ex. Wireless), will I see new Wireless question in the ENCOR v1.1 questions 1 to 7 or old ENCOR questions part 4 to 11. Or all the questions related to the Wireless topic from ENCOR v1.1 questions 1 to 7 and old ENCOR questions part 4 to 11 will be exist in the “Wireless Question 1, 2, 3” ?
@H.Potter: They are different so please grasp all of them.
Passed my exam today.
Labs are exactly same.
passed everything is in here. Encor 1.1 p1-7 enough for test
There are new questions but as mentioned at the beginning of the test these questions have no scoring value and are being evaluated for future test.
The labs were:
VRF Configuration 2 (no tun interface)
eBGP Neighbor Sim
OSPF Summarization
LACP & Root Bridge Sim
NetFlow Sim (ICMP)
Access-list & CoPP Sim (ICMP)
@AnonymousApril 28th, 2025
Well done for passing and thank you very much for this information.
Could you please clarify which eBGP Neighbor Sim you were given – was it Sim1 (no address family) or Sim2 (address family).
Thanks again.
Hello guys,
I need some help please. I need a model /image of the a switch with fastethernet interfaces. I am doing labs (101 CCNP LABS” book, written by Paul Browning) in eve-ng, and the switches I uploaded have gigabitinterfaces and or ethernet interfaces, no fastethernet interfaces.
Can any body helps me?
Thanks in advance.