Share your ENCOR Experience

@Alexander, please kindly share with {email not allowed}

@Alexander, please kindly share with npcccore [AT] gmail dot com

Hey, this site is becoming a sharing dump site ??!! In this space we must share our experience not only a dump that often are fake!

Which IPv6 migration method relies on dynamic tunnels that use the 2002::/16 reserved address space?

A. 6RD
B. 6to4
C. ISATAP
D. GRE

WHATE IS CORECCT ANSWER ?

Hi @Alexander, please can you send me the full dump of ccnp 350-401?
zelekewbake @ gmail.com

Hello @Nitin Chopra,

Can you plse send me 350-401 exam questions?
virat.kolhi2019 (at) g mail . com

Thanx

I passed exam at 900/1000 score.

99 multichoice Questions, 3 D&D , no Simulator.

good luck

Hello @Nitin Chopra,

Can you plse send me 350-401 exam questions?
cheikhbabou12(at)hotmail.fr

Thanx

HI Teletobi,

Congrats just to confirm is it similar to the pdf at VCEplus site provided by Alexander? I will be taking exam on the weekend. Thanks!

Congratulations @Teletobi,

Can you tell us what question file you used to pass the exam? Thank you.

A network administrator is implementing a routing configuration change and enables routing debugs to track routing behavior during the change. The logging output on the terminal is interrupting the command typing process. Which two actions can the network administrator take to minimize the possibility of typing commands incorrectly? (Choose two)

A. Configure the logging synchronous global configuration command
B. Configure the logging delimiter feature
C. Configure the logging synchronous command under the vty
D. Press the TAB key to reprint the command in a new line
E. Increase the number of lines on the screen using the terminal length command

A is one of the answer but cannot figure out what the other one is? either C or D seems these can be correct.

C – Use the line vty line-number command to specify which vty lines are to have synchronous logging enabled
D – If you cannot remember a complete command name, or if you want to reduce the amount of typing you have to perform, enter the first few letters of the command, then press the Tab key. The command line parser will complete the command if the string entered is unique to the command mode. If your keyboard does not have a Tab key, press Ctrl-I instead.

Anyone can shine a light on this matter?

@Ciscolad as per the dump answer is A & C

@Ciscolad

i think answer E is fault because this command is to complet this command

so any other comment about this question

Careful, i notice at least 10 questions wrong with dumps so rather than memorize answer i prefer to know how that answer came to be. Thanks!

Hi @Alexander, kindly share to my email
e r h a p e 9 [at] g m a i l . c o m

Alexander – Please kindly share with me vodavoda4 @ outlook . com

compartir jose240691bg{at}gmail.com

Pls share 350-401 dumps
Kachimoore1 @ yahoo dot com
Thanks

HI Teletobi

please let me know is it enough to study 9tut to pass exam 350-401 ?

vcepluse dump and 9tut question has different answer

so which one is correct please because my exam next week

and if can share which dump you study

raid671 @ g mail

RAID671 @ G M . COM

NEW QUESTION 16
Which statements are used for error handling in Python?

A. try/catch
B. try/except
C. block/rescue
D. catch/release

Answer: C OR B

@Alexander

Please kindly share with enterpriseccnp @ gmail dot com

thanks

Hello all, I am already CCNP (R&S)certified on old version. My certification is going to be expired on 21 march. So which exam should I take to renew my ccnp certification? There are two exam Core (350-401) and Concentration exam – Advanced Routing and Switching (300-410). Please help …

@Question for ya
How many questions are currently included in the premium membership section of 350-401?
→There are 121Q including D&D
I’m not sure their answer are all correct…

I noticed a few wrong answers on premium , same goes for the dumps people are downloading which is worst, found over 10 questions that are wrong. Best review the answer and check explanation.

@William Allbrooks
This is my email simonemieje/yahoo/com, please i need the dumps for CCIE/CCNP Enterprise 350-401 ENCOR exam questions.

Passed ENCOR. Same note as the previous comment by Remontada.

Can any one let me know about labs in Encore 350-401. How many labs and whats the weight age

Which statement about agent-based versus agentless configuration management tools is true?
A. Agentless tools require no messaging systems between master and slaves.
B. Agentless tools use proxy nodes to interface with slave nodes.
C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
D. Agent-based tools do not require installation of additional software packages on the slave nodes.

please i want to know answer A or Answer C !!!

Which statement about agent-based versus agentless configuration management tools is true?
A. Agentless tools require no messaging systems between master and slaves.
B. Agentless tools use proxy nodes to interface with slave nodes.
C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
D. Agent-based tools do not require installation of additional software packages on the slave nodes.

please i want to know answer A or Answer C !!!

please some one can give me the correct answer

Which description of an SD-Access wireless network infrastructure deployment is true?
A. The access point is part of the fabric underlay
B. The WLC is part of the fabric underlay
C. The access point is part the fabric overlay
D. The wireless client is part of the fabric overlay

answer A or answer C but i think answer C

so any one can give me the correct anwer !!

C. The access point is part the fabric overlay

B. Agentless tools require no messaging systems between master and slaves.

ENCOR 350-401 Dumps

https://www.mediafire.com/file/0bm8raud23l9793/CCNP_ENCOR_ICT.pdf/file?fbclid=IwAR0-uruLqO-wyB3qdljc_yosCb-tzR2IXWS8A1eh2xf4WZO90UwfnnMmbVE

You’re welcome!

@Alexander

why you chose answer A and not answer C !!!

Which statement about agent-based versus agentless configuration management tools is true?
A. Agentless tools require no messaging systems between master and slaves.
B. Agentless tools use proxy nodes to interface with slave nodes.
C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
D. Agent-based tools do not require installation of additional software packages on the slave nodes

????????????????

http://www.appperfect.com/blog/agentless-vs-agent-based-monitoring/

Agent vs Agentless
There are two types of configuration management tools:

agent based tools
agentless tools
Agent based tools require the installation of an agent on the system you want to manage. Agentless tools don’t require an agent or software on the system you want to manage.

Sofia
https://networklessons.com/cisco/evolving-technologies/configuration-management-tools-and-version-control-systems

what is difference between Microwave ovens and conventional oven !!!

because the question :
What are two common sources of interference for Wi-Fi
networks? (Choose two.)
A. LED lights
B. radar
C. fire alarm
D. conventional oven
E. rogue AP

network administrator is implementing a routing configuration change and enables routing debugs to track routing behavior during the change. The logging output on the terminal is interrupting the command typing process. Which two actions can the network administrator take to minimize the possibility of typing commands incorrectly? (Choose two)

A. Configure the logging synchronous global configuration command
B. Configure the logging delimiter feature
C. Configure the logging synchronous command under the vty
D. Press the TAB key to reprint the command in a new line
E. Increase the number of lines on the screen using the terminal length command

A is one of the answer but cannot figure out what the other one is? either C or D seems these can be correct.

Hi Guys,
kindly send dumps to lorelee(@)protonmail.com
Thanks.

Router(config)#line console 0
Router(config-line)#logging synchronous
Router(config)#line vty 0 4
Router(config-line)#logging synchronous
A/C

@Alexander, please kindly share with bluevelvis76 AT gmail dot com

Which two statements about VRF-lite are true? (Choose two)
A. It can increase the packet switching rate.
B. It supports most routing protocols, including EIGRP, ISIS, and OSPF.
C. It supports MPLS-VRF label exchange and labeled packets.
D. It should be used when a customer’s router is connected to an ISP over OSPF.
E. It can support multiple customers on a single switch.
HIDE ANSWERSAnswer: DE

but some answer BE and i think DE

so any one can help for this question

Which two operations are valid for RESTCONF? (Choose two)
A. HEAD
B. REMOVE
C. PULL
D. PATCH
E. ADD
F. PUSH
i would to know if answer A D or B D ?
please some one can check this question

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/b_166_programmability_cg_chapter_01011.html

*can’t post exhibit*

Assuming that R1 is a CE router, which VRF is assigned to Gi0/0 on R1?
A. default VRF
B. VRF VPN_A
C. VRF VPN_B
D. management VRF

Anyone know if its A or B ? Could you assist in finding the explanation? Thanks!

Hello guys,

I passed the exam yesterday with a good mark (985/1000).

All the questions and labs were from this dump (Updated on 18th 2020).

dumptopass.shortcm.li/9ni4zP

You can rely to this dump to pass the exam with a good mark.

Regards,

thanks Alxander
@Ciscolad

i think answer is A because : by default vrf is configured in interface PE and so for CE : if router CE is not configured with VRF so default vrf ( table of routing )

Also i am i am confused between answer A and B !!

@Anonymous

Yeah im definitely leaning towards default vrf as the answer. thx

Did you enquiry about the Oven one? Think the answer is LED lights and rogue AP. Old skool LED lights did indeed cause RF interference to WIFI. Conventional Oven is just Heat and fan , if they said Conventional microwave oven then this answer is obvious. My conclusion on that question.