Share your ENCOR Experience

please dont expect to pass using this… for SOME reason people DONT READ. it has been said on each page damn near.. DONT USE THIS AS TEST HAS BEEN SEVERELY UPDATED. you can use it for basic knowledge but dont waste your money.

CONGRATS!!!!!!!!

dont worry you wont loose anything with your knowledge.. its been misleading … most of it at least..

that one you just posted is here already as well.

for all you people wondering what to do… that is why people you should not listen to people who have not put up small amount of cash as for premium.. they are just regurgitating stuff that is here and confirmed they dont know about and who knows how accurate as last page was 90% wrong from him. onlything he got right is there might be a few new questions… but since he didnt really KNOW the questions like the premium members here SHOULD know when they take the test… they cant recount different questions.

CONGRATS SWAT!!!

todays score :

premium 3/3

julyPDF 0/1

yesterdays

premium 1/1

julyPDF 0/1

…

what to do….

sorry for your results.. that question is NOT new… premium has had that one as well

actual test has 2 different questions on error levels in premium. 3 and 5

I passed today , 5 new questions but the premium material is enough for you to pass, thanks to 9 tut premium

please,
can you share dump????

5 for 5 for premiumtut

0 for 3 for old outdated PDF….

like “……” says you don’t HAVE to get premium…. but he has the new questions ….. ones the premium members didn’t have to search for or guess accuracy on… you can also be like ….. if you like the challenge of taking tests w old outdated info.

thanks premium digitaltut always been the real source worth getting!

Please help, what is the exact answer?

What are two reasons why broadcast radiation is caused in the virtual machine environment? (Choose two)

A.Communication between vSwitch and network switch is broadcast based
B.Communication between vSwitch and network switch is multicast based
C.Virtual machines communicate primarily through broadcast mode
D.The Layer 2 domain can be large in virtual machine environments
E.vSwitch must interrupt the server CPU to process the broadcast packet

what is the right answer?
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch
C. security group tag ACL assigned to each router on a network
D. security group tag number assigned to each port on a network

Passed today 94x….. digital tut premium is valid… there are lot of people of using old dumps and failed.. don’t listen them 2 new question but simple one was for cloud and on premises others one was wireless controller something don’t remember

Good luck!

Passed today!!!!
941 :D Drag & drops & New Questions all over the exam, it really helped me, all still valid.
Good luck for all!

@JOJO the answer is A & E.Sure for this.

@SS I’m not sure of the answer but I believe it was A. Do a research.

or sign up premium has correct answers.

or YOU can BE like deedideee “….” and challenge yourself and your luck and not know the correct answers without doing your own questionable research. july 2020 pdf is 0 for 3 this week.

7 for 7 on premium members last 5 days

don’t be a lucky deedidee… pass w knowledge

actually explains the answers so u learn the material NOT the wrong answers deedideee s

There is no LAB? There is only question?

Does ENCOR included lab?

This test includes the lab?

pass with 954 today. still reliable. no labs only mc, d&d, mcma

@Digtialtut i will have the exam tomorrow , please update new questions

he passes every day! too bad he never ever actually contributes by providing NEW test questions. just links to old premium questions from that july2020pdf

is A month enough to study and pass ?

How many question are in the premium membership section?
Thanks

Premiun is still valid. Took and passed the exam successfully 9xx. No new questions from outside the premium except for one related to cloud and on-prem which I have seen herr on a previous comment.
If you have completed the premium, go ahead immediately.

Good luck for everyone and special thanks for digitaltut. Worth every penny.

Cheers.

Congrats @D_123. Sorry I didn’t post earlier. I can also confirm that Premium is 100% valid. I also passed yesterday with 9xx. I only had 1/2 new questions, one of which was the same as D_123 mentioned. It was choose two of cloud vs on-prem. Pretty straight forward. Can even recall the other one now. Some of the questions have the typo’s and stuff that have been fixed from the questions here. Make sure you know your stuff and aren’t just brain dumping. Here’s to another 3 years of CCNP. 10+ now. Good luck to all.

congrats u2 and thanks for the updates

Can someone please share those dumps here ? Thanks

D_123 : Can you please share those dumps here ? Thanks.

Dumps from this website are still valid, passed the exam today. Except for 5 new questions all the questions are from available here

Premium is valid, passed.
New q:
-Simple ACL config about blocking http traffic. But in Cisco style, was unclear if port 80 was source or destination, but probably point was that extended acl number is 100-199.
-Simple cloud/onprem
-NGFW, how to expand capacity
o inline tap
o cluster
o high availability
o

premium has 1 or 2 questions on acl.

before you say its NEW did you check the questions here? I would verify those.

Can someone verify this answers?

Which two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two)
A. Use a single trunk link to an external Layer2 switch
B. Use a virtual switch provided by the hypervisor
C. Use VXLAN fabric after installing VXLAN tunnelling drivers on the virtual machines
D. Use a single routed link to an external router on stick
E. Use a virtual switch running as a separate virtual machine
Answer – B,E ?

How does the RIB differ from the FIB?
A. The RIB includes many routes to the same destination prefix. The FIB contains only the best route.
B. The FIB maintains network topologies and routing tables. The RIB is a list of routes to particular network destinations.
C. The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.
D. The FIB includes many routes a single destination. The RIB is the best route to a single destination.

Answer C?

What is the purpose of an RP in PIM?
A. secure the communication channel between the multicast sender and receiver.
B. ensure the shortest path from the multicast source to the receiver.
C. receive IGMP joins from multicast receivers.
D. send join messages toward a multicast source SPT

Answer – C ?

Refer to the exhibit. An engineer is using XML in an application to send information to a RESTCONF-enabled device. After sending the request, the engineer gets this response message and a HTTP response code of 400. What do these responses tell the engineer?

A. POST was used instead of PUT to update
B. The Accept header sent was application/xml
C. The Content-Type header sent was application/xml.
D. JSON body was used

Answer: B ?

Refer to the exhibit. Edge-01 is currently operational as the HSRP primary with priority 110. Which command on Edge-02 causes it to take over the forwarding role when Edge-01 is down?
A. standby 10 priority
B. standby 10 timers
C. standby 10 track
D. standby 10 preempt

Answer – D ?

How is a data modeling language used?
A. To enable data to be easily structured, grouped validated, and replicated
B. To represent finite and well-defined network elements that cannot be changed
C. To model the flows of unstructured data within the infrastructure
D. To provide human readability to scripting languages
Answer: A ?

Refer to the exhibit. A network engineer configures a GRE tunnel and enters the show interface tunnel command. What does the output confirm about the configuration?
A. The keepalive value is modified from the default value.
B. Interface tracking is configured.
C. The tunnel mode is set to the default.
D. The physical interface MTU is 1476 bytes.
Answer: C ?

An engineer must ensure that all traffic entering AS 200 will choose Link 2 as an entry point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
A. Option A B. Option B C. Option C D. Option D
Answer: A ?

What are two reasons why broadcast radiation is caused in the virtual machine environment? (Choose two)
A. vSwitch must interrupt the server CPU to process the broadcast packet
B. The Layer 2 domain can be large in virtual machine environments
C. Virtual machines communicate primarily through broadcast mode
D. Communication between vSwitch and network switch is broadcast based
E. Communication between vSwitch and network switch is multicast based
answer – A, b ?

Wireless users report frequent disconnections from the wireless network. While troubleshooting a network engineer finds that after the user a disconnect, the connection reestablishes automatically without any input required. The engineer also notices these message logs.

Which action reduces the user impact?
A. increase the dynamic channel assignment interval
B. increase BandSelect
C. increase the AP heartbeat timeout
D. enable coverage hole detection
Answer – A?

Which statement about LISP encapsulation in an EIGRP OTP implementation is true?
A. OTP uses LISP encapsulation for dynamic multipoint tunneling
B. OTP maintains the LISP control plane
C. OTP uses LISP encapsulation to obtain routes from neighbors
D. LISP learns the next hop
Answer: A?

passed today with score 9XX. premium content is still valid got like around 5 new questions but still enough to pass

premium has verified answers for you

Still valid. Passed. Two new questions, one is simple ACL.

thank you CK0 for your info and CONGRATS!!

@Yamite

CONGRATS and thank you for your update

Still valid, don’t listen to anybody saying new questions I saw two very simple. If you study and use this site, you won’t fail. You can as well study using materials supplied by tut. Once you grasp the concept, go and write the exam. The whole idea is to understand the concept not to memorize answers. STUDY, STUDY, and you’ll definitely pass. I studied with David Bombal Videos and links supplied here by tut. I think it is also best to be a premium member, and I am one.

I passed today!

@Paswd

I am premium, so the questions are still valid?

How did the exam go?

Congrats

Can someone please share those dumps here ? Thanks

I have passed exam at 3rd november, 95x score. All!! Q from dump.

I passed, got 856, found a few new questions, one about HSRP, I remenber that it was a show standby output and you had to identify the track which removes 10 to the priority everytime it goes down.

also found a new question about on premises and cloud stuff more of the same.

Can anyone share updated tut valid dump link thanks

Passed the exam 9xx. Premium is enough to pass.
got some new questions in my exam.

-What are two reasons a company would choose a cloud deployment over an on-prem deployment? (Choose Two)
-Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?

i forgot the other one.

Hi Guys please help.

What is the answer here?
Which statement about TLS is true when using RESTCONF to write configurations on network devices?
A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.

I got C and A…

Hello All

How often they change the questions?
Anyone have the latest dump, would you please provide the link to download?
thank you

What is the answer with this one?
Which method displays text directly into the active console with a synchronous EEM applet policy?
A. event manager applet boom event syslog pattern ‘UP’ action 1.0 syslog priority direct msg ‘logging directly to console’
B. event manager applet boom event syslog pattern ‘UP’ action 1.0 gets ‘logging directly to console’
C. event manager applet boom event syslog pattern ‘UP’ action 1.0 string ‘logging directly to console’
D. event manager applet boom event syslog pattern ‘UP’ action 1.0 puts ‘logging directly to console’

Hello All
Are the actual exam questions the same as TUT, including values such as IP address and JSON?
I understand that it’s important to learn the concept as TUT says, but is it really OK to memorize TUT’s questions and answers?

Could someone tell me if the premium questions are the same as the exam?