Share your ENCOR Experience

What are three valid HSRP states? (Choose three)
A. listen
B. learning
C. full
D. established
E. speak
F. INIT

Which one is correct ?

@ergenekon

A,B,E

Which method displays text directly into the active console with a synchronous EEM applet policy?
A.
event manager applet boom
event syslog pattern ‘UP’
action 1.0 gets ‘logging directly to console’
B.
event manager applet boom
event syslog pattern ‘UP’
action 1.0 syslog priority direct msg ‘log directly to console’
C.
event manager applet boom
event syslog pattern ‘UP’
action 1.0 puts ‘logging directly to console’
D.
event manager applet boom event syslog pattern ‘UP’
action 1.0 string ‘logging directly to console’

McRae, the question is flawed but A is the best answer. There are a couple questions like this almost on every Cisco (and other exams) that don’t really make sense or are utterly wrong.

I just now passed with 9XX/1000. Study hard guys – You need to know all technologies overview + catches/tricks in each.

Premium questions are valid, thank you digitaltut for your contribution.

Always solve premium questions once your prep is finished. I used CBT nuggets + Boson + Labbing + Premium questions to pass.

Hello guys, can anyone advise how to recertify the CCS – Enterprise Core and CCNP Enterprise?? what is the exams that I can apply in order to maintain the I have less than 40 days. thank you

Hello guys, is the ENCOR test have Lab sim? Do I need to learn ROUTE 300-101 dump?

Hi everyone,

What about this question? Could you confirm if the correct is the B ?

What does the LAP send when multiple WLCs respond to the CISCO_CAPWAP-CONTROLLER.localdomain hostname during the CAPWAP discovery and join process?

A. Unicast discovery request to the first WLC that resolves the domain name
B. unicast discovery request to each WLC
C. broadcast discover request
D. join request to all the WLCs

Thank you!

@Steve
To recertity your “CCNP Entrerprise”, you have to pass one technology core exam :
for example ENCOR 350-401 or any two professional concentration exams , for example 300-410 ENARSI & 300-415 ENSDWI OR 300-410 ENARSI & 300-420 ENSLD OR ….)

@Steve
To recertity your CCNP Entrerprise, you have to pass one technology core exam (for example ENCOR 350-401) or any two professional concentration exams (for example 300-410 ENARSI & 300-415 ENSDWI OR 300-410 ENARSI & 300-420 ENSLD OR ….)

@McRae
Answer B. unicast discovery request to each WLC

@hi
No the actuel ENCOR Exam doesn’t include LAB

@Yanior
thank you so much
let me make sure that I understand it correctly, Does the ENCOR 350-401 recertify both CCS – Enterprise Core and CCNP Enterprise??

@Steve
Exactly

Hello all,

Does Anyone have the ENARSI latest questions? Please send them frank.hoban1990 @ gmail . com

Thank you very much in advance.
Frank

I passed today thanks to digitaltut, all premium questions are still valid, there were like 5 new questions on the exam that premium does not have, I don’t remember those new question.

I exam was 105 questions.

I will see you in 3 years.

Is there any new questions ?

I am planning to take the exam at home, what if I lost internet connecting, can I easily shift the internet to mobile data and continue the exam ? can any one throw some light on this.

Yes, he also cheated me, he is Quasim ali, his number is his phone number, +971 55 648 9962

Today I passed exam with 93x.
I face with 5-10 a new questions but it’s not hard.

Thanks for digitaltut.

@James,
Doyou mean the anonymous S P P A M MER who shares Suspicious links for DUMP?

Questions here still valid….had about 4 new questions which were similar to questions on this site. Easy peasy…good luck. Warning you need to understand the explanations and take your time its very easy to make mistakes

@ansawp, do you remember the new questions ?

Taking exam soon..had to postpone because of Covid.

Do we know what the new questions mentioned today actually are?

@ansawp and @RealSlim do you remember the new questions ?

If anybody who passed Encor Exam and remember the several new questions please share.

Thank you so much!

seems there are around 5 to 10 new questions. @digitaltut any update ?

3 New questions
Why would a log file contain a * next to the date?
A. The network device was receiving NTP time when the log messages were recorded
B. The network device was unable to reach the NTP server when the log messages were recorded.
C. The network device is not configured to use NTP
D. The network device is not configured to use NTP time stamps for logging.

Security policy requires all idle-exec sessions to be terminated in 600 seconds. Which configuration
achieves this goal?
A. line vty 0 15
absolute-timeout 600
B. line vty 0 15
exec-timeout
C. line vty 01 5
exec-timeout 10 0
D. line vty 0 4
exec-timeout 600
An engineer has deployed a single Cisco 5520 WLC with a management IP address of
172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the
WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the
172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows:
The access points are failing to join the wireless LAN controller. Which action resolves the issue?
A. configure option 43 Hex F104.AC10.3205
B. configure option 43 Hex F104.CA10.3205
C. configure dns-server 172.16.50.5
D. configure dns-server 172.16.100.1

Any one can suggest answers which posted by @assili ?

Thanks Digitaltut, all the questions are from here, only 1 or 2 new questions came to me. I gave the exam from home, there is a video on youtube that explains step by step https://www.youtube.com/watch?v=otw3uO3KXpA&t=490s

i think that the question posted by @assili could be solved with :

Why would a log file contain a * next to the date?
A. The network device was receiving NTP time when the log messages were recorded
because for cisco the “*” means : time is not authoritative: the software clock is not in sync or has never been set

Security policy requires all idle-exec sessions to be terminated in 600 seconds. Which configuration
achieves this goal?
C. line vty 01 5
exec-timeout 10 0
although it is written “line vty 01 5” and perhaps it is a typo, the only command that define the exec-timeout, it’s really “exec-timeout [seconds]” so the command “exec-timeout 10 0 “means 10 minutes = 60 seconds x 10 = 600
An engineer has deployed a single Cisco 5520 WLC with a management IP address of
172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the
WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the
172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows:
The access points are failing to join the wireless LAN controller. Which action resolves the issue?
A. configure option 43 Hex F104.AC10.3205
because although the command relative to option 43 is missing, the configuration of the same field to indicate the wlc is carried out by indicating 00 F1 04 + the 4 octets in hexadecimal digits

@assili I would say C – C – A

References:
1) NTP is not configured, https://community.cisco.com/t5/other-network-architecture/logging-shows-an-asterisk-quot-jan-13-11-05-40-quot/td-p/564707

2) 600 seconds is 10 minutes and 0 seconds

3) https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1550/installation/guide/1550hig/1550_axf.pdf the hexadecinal of the ip address is AC10.3205

Hi Digitut.

Any update on the new exam materials?

Thanks

Hi all,

Please kindly share the dumps with me here franciscobfranco @ gmail.com

Thanks ina dvance.

Passed exam with 9×× and dump is valid.there around 15 new questions. Thanks digitaltute.cheers.

Hello Digitaltut.com!
I passed exam with 90x.
It is a valid dump!
There are new questions (about 15 or more)!
To be a Premium Member is great!
Thanks digitaltut.com … thanks thanks thanks.

Passed today. Most of the questions from here. 10-15 new questions on the test.

Pass my 300-401 ENCOR exam thanks to digitaltut, all premium questions are still valid, 5-10 new questions.

@digitaltut when are you going to include the new questions in the composite quizzes?

hello ALL , I joined newly in this group, I want to take 350-401, so I as I have checked entire discussion, there is one premium dump, and other composite quizzes, and I downloaded one composite quizzes (part tree) so please clearify for me from where I should start studying dump ?

please asnwer
is the link below valid.
https://www.mediafire.com/file/bw7b3pilcg700r0/ENCOR_Dec_2020.pdf

please who has Avanset exam simulator to open VCE Files? will Appreciate your reply

Cleared 350-401 today. This website was very helpful. Thanks to everybody especially the admins.

Hi, can anyone post the latest dump
How many total questions in the dup now?

A wireless client is connecting to FlexAP1 which is currently working standalone mode. The AAA authentication processis returning the following AVPs:

Tunnel-Private-Group-Id(81): 15
Tunnel-Medium-Type(65): IEEE-802(6)
Tunnel-Type(64): VLAN(13)
Which three behaviors will the client experience? (Choose three.)

A. While the AP is in standalone mode, the client will be placed in VLAN 15.
B. While the AP is in standalone mode, the client will be placed in VLAN 10.
C. When the AP transitions to connected mode, the client will be de-authenticated.
D. While the AP is in standalone mode, the client will be placed in VLAN 13.
E. When the AP is in connected mode, the client will be placed in VLAN 13.
F. When the AP transitions to connected mode, the client will remain associated.
G. When the AP is in connected mode, the client will be placed in VLAN 15.
H. When the AP is in connected mode, the client will be placed in VLAN 10.

Can anyone explain? thanks

@assili, i believe there is a exhibit for the new question

Refer to the exhibit. Security policy requires all idle-exec sessions to be terminated in 600 seconds. Which configuration achieves this goal?

Router#sh run | vty
line vty 0 4
session-timeout 30
exec-timeout 120 0
session-limit 30
loigin local
line vty 5 15
session-timeout 30
exec-timeout 30 0
session-limit 30
login local

A.
line vty 0 15
absolute-timeout 600
B.
line vty 0 15
exec-timeout
C.
line vty 0 15
exec-timeout 10 0
D.
line vty 0 4
exec-timeout 600

Correct Answer: C

Hi guys,

Can anyone clarify that one?? The explanation doesn´t match with the corrected answers!!

What are two reasons for IP SLA tracking failure? (Choose two )

R1(config)#ip sla 1
R1(config-ip-sla)#icmp-echo 172.20.20.2 source-interface FastEthernet0/0
R1(config-ip-sla-echo)#timeout 5000
R1(config-ip-sla-echo)#frequency 10
R1(config-ip-sla-echo)#threshold 500
R1(config)#ip sla schedule 1 start-time now life forever
R1(config)#track 10 ip sla 1 reachability
R1(config)#ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
R1(config)#no ip route 0.0.0.0 0.0.0.0 172.20.20.2
R1(config)#ip route 0.0.0.0 0.0.0.0 172.30.30.2 5

A. A route back to the R1 LAN network is missing in R2
B. The default route has wrong next hop IP address
C. The source-interface is configured incorrectly
D. The threshold value is wrong
E. The destination must be 172.30.30.2 for icmp-echo

A and D ??

Thank You ;)

Can anyone share CBT Nuggets or Official Guide ? Any study guide with all the topics to start studying from? Thanks in advance! Encor 350-401

@McRae

i believe it is
A. A route back to the R1 LAN network is missing in R2
C. The source-interface is configured incorrectly

@yesman I agree but on the explanation on this site and the correct answers are different!

@Digitaltut Could you please verify this?

Thanks ;)

can you please answer this?

if i paid the membership would i get the premium dump that you all people talking about?

or will get the questions from the comments like what we are doing now ?