Share your ENCOR Experience

Hello, my test is scheduled in 2 days and my premium expires in 4 days.
any advise on when the new questions will be updated on digitaltut?

Has anyone passed the exam?

Yeah passed today, quite a few new Qs but still many from here. About 20 new Qs I think.

Hi gents, i sat for my exam today and somehow manage to pass with 871 score. I was preparing for this exam for the last 2 weeks and i was a little worried when i saw there were new questions added but yet to be updated here in Digitaltut somewhere last week. I had at least 20 new questions and i can tell you about at least 15Q was from the list which TInker (5th April) and vengean (7th April) posted. If you are sitting for the exam anytime in the next 5 days presuming that Digitaltut has yet to provide the latest dump then i suggest you read all the existing question from digitaltut, do some read up on JSON, Phython syntax, Guest WLC, EEM script to append file, and the extra questions provided by the ppl here. I was probably lucky that i made through atleast 10Qs which was also alien to me :( to get this score today. If you have not scheduled ur exam i suggest wait till the next update from digitaltut but if ur exam is in the coming days dun panic or get stressed up, just read up all the existing materials here and some extra read ups probably will get you through. I know how it feels as i was in the same boat as you guys. Good Luck and Best wishes. Thank you digitaltut thats all i can say for now.

I passed in encor exam 50% in dumps only and 50% new questions.

Is not easy … good luck

@DIGITALTUT

Do you have estimated time to update the question?

Q 1) Correct B – presence
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2016/pdf/BRKEWN-2012.pdf

Thank you everyone for your answers. So I found other new questions. Can you approve their answers? Did exam takers encounter these questions?

6) An engineer must create an EEM applet that sends a syslog message in the event a change happens in the network due to trouble with an OSPF process. Which action should the engineer use?
event manager applet LogMessage
event routing network 172.30.197.0/24 type all
A)action 1 syslog msg “OSPF ROUTING ERROR”
B)action 1 syslog send “OSPF ROUTING ERROR”
C)action 1 syslog pattern “OSPF ROUTING ERROR”
D)action 1 syslog write “OSPF ROUTING ERROR”

7) R1#show access-list 100
Extended IP access list 100
10 deny ip any any
20 permit ip 192.168.0.0 0.0.255.255 any
30 permit ip any 192.168.0.0 0.0.255.255
Refer to the exhibit. Extended access-list 100 is configured on interface GigabitEthernet0/0 in an inbound direction, but it does not have the expected behavior of allowing only packets to or from 192.168.0.0/16. Which command set properly configures the access list ?
A)R1(config)#ip access-list extended 100
R1(config-ext-nacl)#5 permit ip any any

B)R1(config)#no access-list 100 seq 10
R1(config)#access-list 100 seq 40 deny ip any any

C)R1(config)#no access-list 100 deny ip any any

D)R1(config)#ip access-list extended 100
R2(config-ext-nacl)#no 10

Correct answer?? AOR B??
Which method should an engineer use to deal with a long-standing contention issue between any two VMs on the same
host?
1. Adjust the resource reservation limits
2. Live migrate the VM to another host
3. Reset the VM
4. Reset the host

@Tt

2.Live migrate the VM to another host

Hi, correct answer B or C?

Which protocol is implemented to establish secure control plane adjacencies between Cisco
SD-WAN nodes?
A. IKE
B. DTLS
C. IPsec
D. ESP

I am assuming everyone will be satisfied when the site gets shut down. If you continue to post questions which is a a copy right violation, it is just a matter of time. Not all information is good information. Do not take for granted that this site is not on a watch list. Let the owner of the site handle his business, if he or she needed help I do not think they would be in business.

@vengean

Q6 A
Q7 D

8) client.connect (ip,ports=22, username=usr, password=pswd)
stdin, stdout, stderr = client.exec_command (‘show ip bgp 192.168.101.0 bestpath\n’)
print (stdout)
Refer to the exhibit. Which outcome is achieved with this Pyhton code ?
A. displays the output of the show command in an unformatted way
B. displays the output of the show command in a formatted way
C. connects to a Cisco device using Telnet and exports the routing table information
D. connects to a Cisco device using SSH and exports the routing table information

9) event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.3 get-type next entry-op gt entry-val 80 poll-
interval 5
!
action 1.0 cli command “enable”
action 2.0 syslog msg “high cpu”
action 3.0 cli command “term length 0”

Refer to the exhibit. An engineer must create a script that appends the output of the show process cpu sorted command to a file. Which action completes the configuration?
A. action 4.0 syslog command “show process cpu sorted | append flash:high-cpu-file”
B. action 4.0 cli command “show process cpu sorted | append flash:high-cpu-file”
C. action 4.0 cns-event “show process cpu sorted | append flash:high-cpu-file”
D. action 4.0 publish-event “show process cpu sorted | append flash:high-cpu-file”

@contoso

Thank you for answers :)

@vengean
1) Answer D- trileteration
Distance-Based (Trilateration) Techniques

@digitaltut

Please update the exam question.

@ Anonymous I agree, Lets keep our desperation low key. You have 24 hrs to reschedule your exam if you are not ready to test. Use that option which is available to you. I am waiting as well and I will never post test questions. Anyone who does, I see it as suspect and would never answer. Smart people dont do dumb things

if somebody has date of recertification -can’t change it and wait longer …!!!

some people have to re-certyficate- they can’t change exam date …..
it takes over one week for @digitaltut for new questions ???
if you the don’t know answers – just publish questions !

Dear team @Digitaltut wait how long the update, the subscription of many of us is still running and without update is not functional, please your support as soon as possible.

Hi guys, correct answer please? A,C or A,D

327. A customer has completed the installation of a Wi-Fi 6 greenfield deployment at their new campus. They want to leverage Wi-Fi 6 enhanced speeds on the trusted employee WLAN. To configure the employee WLAN, which two Layer 2 security policies should be used? (Choose two.)

A. 802.1XB. WPA (AES)C. WPA2(AES)+WEPD. OPEN

@ jmc I am not sure where and how you are taking your exam. There is no such thing as you cannot reschedule a exam. You can even cancel your exam and receive your money back, if you do it before 24 hours. Provide accurate information and do not mislead. This is why I agree with the other two posts because people are in it for their own profit and really do not care about much more. The test provider has been known to trick sites into posting questions to assist them in their final goals. If I can wait, cancel, reschedule anyone else should be able to.

@ Ccnp why give answers to the premium questions. This is disrespectful to the owner of the site, who is working hard for its members. If people wants answers let them pay for the premium questions like everyone else. Do not disrespect the site owner.

@Anonymous: I think what jmc means is that if you are re-certifying your current CCNP, you are kind of bound by time and if you re-schedule the exam for a later date, you loose your current certification(s) as it runs out. And so re-scheduling is not much an option for those candidates.

@Dweller, exactly – it’s what I wanted to say …
for “re-certifying” is not extra time

@Tutty:

All switches are configured with the default port priority value. Which two commands ensure that traffic from PC1 is forwarded over Gi1/3 trunk port between DWS1 and DSW2? (Choose two)

A. DWS1(config-if)#spanning-tree port-priority 0
B. DSW2(config-if)#spanning-tree port-priority 16
C. DSW1(config-if)#interface gi1/3
D. DSW2(config-if)#interface gi1/3
E. DSW2(config-if)#spanning-tree port-priority 128

The port priority is set on the remote switch so for DSW1 to make Gi1/3 its root port, port priority on DSW2-Gi1/3 will have to be reduced to a lower than 128 value. And yes 16 is not a valid value so cant be B either?

Which two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two)

A.Use a virtual switch provided by the hypervisor
B.Use VXLAN fabric after installing VXLAN tunnelling drivers on the virtual machines
C.Use a single trunk link to an external Layer2 switch
D.Use a single routed link to an external router on stick
E.Use a virtual switch running as a separate virtual machine

Shouldnt the answers be A,C rather than A,E?

When will digitaltut update the questionnaires? So I can renew my subscription again. Thank you

such loosers still posting premium questions. by the darn premium if you want the answers. another person trying to set up their own dump no intention of taking the exam. A real network person would research the question and get the answer. A dumper will just sit on their thumbs and wait for someone else to do it. The owner my eventually stop posting questions all together if people keep disrespecting his site. the more questions people post the longer they take to update the exam.

Please share with us your experience to prepare for the new ENCOR 350-401 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

2) A customer has a pair of Cisco 5520 WLCs set up in an SSO cluster to manage all APs. Guest traffic is anchored to a Cisco 3504 WLC located in a DM2. Which action is needed to ensure that the EolP tunnel remains in an UP state in the event of failover on the SSO cluster?

A. Use the mobility MAC when the mobility peer is configured
B. Use the same mobility domain on all WLCs
C. Enable default gateway reachability check
D. Configure back-to-back connectivity on the RP ports

Answer A(not 100% sure)

5) How do cloud deployments differ from on-prem deployments?
A. Cloud deployments require longer implementation times than on-premises deployments
B. Cloud deployments are more customizable than on-premises deployments.
C. Cloud deployments require less frequent upgrades than on-premises deployments.
D. Cloud deployments have lower upfront costs than on-premises deployments.

Answer D

8) client.connect (ip,ports=22, username=usr, password=pswd)
stdin, stdout, stderr = client.exec_command (‘show ip bgp 192.168.101.0 bestpath\n’)
print (stdout)
Refer to the exhibit. Which outcome is achieved with this Pyhton code ?
A. displays the output of the show command in an unformatted way
B. displays the output of the show command in a formatted way
C. connects to a Cisco device using Telnet and exports the routing table information
D. connects to a Cisco device using SSH and exports the routing table information

Answer should be A(because D can be also correct but it’s not whole “BGP routing table”)

9) event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.3 get-type next entry-op gt entry-val 80 poll-interval 5
!
action 1.0 cli command “enable”
action 2.0 syslog msg “high cpu”
action 3.0 cli command “term length 0”

Refer to the exhibit. An engineer must create a script that appends the output of the show process cpu sorted command to a file. Which action completes the configuration?
A. action 4.0 syslog command “show process cpu sorted | append flash:high-cpu-file”
B. action 4.0 cli command “show process cpu sorted | append flash:high-cpu-file”
C. action 4.0 cns-event “show process cpu sorted | append flash:high-cpu-file”
D. action 4.0 publish-event “show process cpu sorted | append flash:high-cpu-file”

should be B

hi everyone! why digitaltut doesnt uptade questions? it is unfair for premium members

I passed today. I can confirm, 50-60% of the questions are here in the premium section, the rest are not really difficult. New questions are mostly python, JSON, ACLs, and WLC. Just use your logic and study well the Wireless and automation section of the 350-401 Cisco book. Some of the questions I faced are pretty similar to the ones in the book.

@vengean
1) A customer has 20 stores located throughout a city…
C) hyperlocation seems to be the best answer.
I think the trilateration needs multiple APs to be present and in our scenario there is only one AP in the store. [b/w these techniques are advanced wlan topics and not covered in the ENCOR cert guide]

7. In a cisco DNA center Plug and Play environment, why would a device be labeled unclaimed?

Plug and Play provisioning provides a way to automatically and remotely provision and onboard new network devices with minimal network administrator and field personnel involvement.
Provision unclaimed network devices, which are new devices that appear on the network, without prior planning. An unclaimed device can be added manually by an administrator, or automatically through one of the discovery methods

[Source: Cisco DNA Center User Guide]

@hello pay for the premium if you wants answers or allow others to pay for premium

Please share with us your experience to prepare for the new ENCOR 350-401 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

@digiitut in order to keep non premium users from posting question, I will lower the font to 10 characters to prevent questions from non members or any member from posting questions

New questions are now up

I find this a bit strange the guys who went to the exam reported at least 20 new questions (some said even 40), but we received only 11. I guess that is at least something.

@Hank, its not strange that is because the ones who say there are 20 questions is because they do not pay for the premium. Do not be mislead by false information. Most if not all people that post questions are trying to get away from paying the premium price which is not that much to begin with. Trust the owner of the site.

greetings all, plz do you know where we can get fortinet nse4 dumps?

He friends,new questions is update from digitaltut premium web site??????

@Ccnp yes

Hi All,

I have passed my exam with 9XX yesterday. This dump is still valid, I have received 80% of the question from this dump. So dont believe whoever saying that , this is not valid or had a lot of new questions.

I had 4 to 5 new python questions, about 4 new on wireless and couple of new questions of DTP.

All drag and drop from here.

So prepare this dump not just memorising but do it properly, read wireless and python too.

All the best.

@hi all

I finally Passed the exam. This is valid bro. Goodluck. there is new questions but i think you can handle it. :) study also the new questions on comment! it will appear on your exam and you will be thankful that you read it.

read and analyze the questions.

done yesterday , @digitaltu valid in 80 %, new questions are higher on this page 73 and 72 … goodl luck bro …

Anyone has the soft copy of the dump here?

Corect answet B or C

Which protocol is implemented to establish secure control plane adjacencies between Cisco SD-WAN nodes?

A. IKE
B. DTLS
C. IPsec
D. ESP

@Merlin buy the premium

With all I have been seeing and reading on this site I would like to offer my 2 cents. If you are paying $400 to take the exam so is so difficult or costly to pay the premium cost to access all the questions. If you do not want to may the premium that means you have no intention of taking the exam. It does not take a rocket scientist to figure that one out. So now we know that people who ask for answers to questions are not premium members and have no intention of taking the exam.