Share your ENCOR Experience

Passed exam. no score given, just percentages for each section. All but 2 questions are here. Studied all premium sections (Arch – D&D2) and all Part 4-8. Read all tutorials. No dump needed. Thanks Digitaltut, consider me a lifetime customer.
Next is Design and then Data Center.

Hi, Could you please share me dump? I will take exam on next 2 weeks!

mincukho at gmail dot com

Thank you

@ Blessed
Please tell us if all questions in your exam were the same questions at digitaltut unless 2 new questions or what????

Exam Result: Pass. I only used the Official Cert Guide and this site a source material. Most of the questions were from Digitaltut, about 2 or 3 new questions, and about 5 rephrased questions, so make sure you understand the basis on each question here, and take your time to read both questions AND answers on the exam. Thanks Digitaltut, and best of luck to everyone

Could someone please send me valid dumps?

parnk123 at gmail dot com

I just passed today and this site is 100% valid. Premium paid off. :)

@ Comdrop
All the questions as same the premium or there are different questions????

@Comdrop
Are there a new questions not included in the premium? I’m kinda hesitant as there are some says its not update. Thanks

@Comdrop
Are all questions covered in the premium? Some says there are new questions.

Hey guys
I passed my exam today with a good mark (980/1000)
All the questions and drag & drop were from this dump.
link.ac/5JJL4
You can rely to this dump to pass the exam with a good mark.
Good luck on the exam
Regards,

I passed my exam today with the same exam dumps

It was very easy with premium

𝖚𝖔𝖋𝖌𝖇.𝖙𝖐

Hi guys, anyone know where I might buy cisco IOS?…apart from cisco which require a contract

hello, just past my exam. do all de question and you pass.

@clrm
any new questions ,,, or all the question in the exam were at the digitaltut ????

Same Qs and same answers like premium as of today no new questions. They are very random so you need to study all the questions and pick the best answers. Wish you guys good luck as you prepare to write.

Hi everyone, today I passed my exam ENCOR. I recommend the Premium Access of Digitaltut. Thank so much Digitaltut!

@Anonymous
Any new questions?

I just passed exam last week, dump is still valid no worry

please help to share ENARSI dump, I will take exam next week. thanks

Dear all, if any one have latest CLCORE 350-801 dumps pls send us email.. cefcompk at gmail dot com or Past the download link here. My exam in the last week of this month. Thank you.

@digitaltut how to get preimum membership

Any one pass the exam today???

For premium users, where can I find part 1 – 3 New ENCOR Questions?

@FirstTimePremiumUser

It is divided into smaller topics from Architecture until drag and drop.

@digitaltut how can i get premium membership

NEW QUESTION!!!

WHAT ARE TWO BENEFITS OF SD-WAN Architecture? (Choose two)

@digitaltut

please update

@RogerThat
Are you take the exam and you find new questions or what???

Lots of new questions.

Digitaltut you need to update asap!!!!!!!!

Premium is only 75-80%

I failed today… 😭

Lots of new questions. Admin you need to update and add more new questions!!!!!

Any updated questions??

@digitaltut

I will have my exam on Oct 15.

Plss update new questions Asap!!

@Abdul Marwan
How many new questions?

@Karab Dubai
How many new questions?!

Is there a way to pay without using paypal for Premium?

@Digitaltut
Please update the premium dump with the new questions

What has happened to this website? I have always used this website since 2010, all information was available for free, what has happened now that they charging for it? very disappointed, it was the best source on the internet.

I passed my exam today with the same qs

It was very easy with premium

𝖙𝖚𝖊𝖋𝖐.𝖙𝖐

@digitaltut… What changes did the exam have?? because I will take the exam on October 14

@digitaltut

Please update the questions ASAP!!!!!

I will retake on Oct 14.

NOTE FROM DIGITALTUT PREMIUM:
Note (12th-Oct-2021): The exam has just been changed and we are working to gather information. Please wait for some time before taking the exam.

@Anonymous
Is fake fake fake

@digitaltut

Please take action ASAP!!!!!!!!!!

I will retake my exam on Oct 14!!!!!!!!!!!!

I FAILLED :(((

70% only in digitaltut dumps.

NOT VALID!!! Need to update @digitaltut

Please update new questions if any asap.

@Digitaltut:

As many people here i have scheduled exam on
a few days (exactly on 15th). Do you think best option is to reschedule?

What are you gonna do all of you guys?

I am hard to believe the change is so tricky, so many new questions…

Thx

For those who passed or NOT the exam TODAY, can You provide some info about the new questions ?

Thanks in advance

I have an exam on Oct 15.

Any other comments/feedback from other people who took the exam today?

@digitaltut kindly pls update asap if theres new qs

Please any one take the exam today , put the new questions you are members here ,to help digitaltut for collecting the info to update the dump

TO ALL I found some new questions but i am not sure for the right answers. Here is my sharing:

463. How does a router behave when configured with the default DNS lookup settings, and a URL is entered on the CLI?
 A. prompts the user to specify the desired IP address.
 B. initiates a pinfsfg request to the URL.
 C. continuously attxempts tos resolve the URL until the command is cancelled.
 D. attempts to query a DNS server on the network
Correct Answer: D

464. What does a router do when configured with the default DNS lookup settings, and a URL is entered on the CLI?
 A. initiates a ping request to the URL
 B. prompts the user to specify the desired IP address
 C. continuously attempts to resolve the URL until the command is cancelled
 D. sends a broadcast message in an attempt to resolve the URL
Correct Answer: D

478. Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise them into OSPF are 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configurating must engineer apply to resolve the problem?

 A. Option A
 B. Option B
 C. Option C
 D. Option D
Correct Answer: D

480. An engineer is implementing a Cisco MPLS TE tunnel to improve the streaming experience for the clients of a video-on-demand server. Which action must the engineer perform to configure extended discovery to support the MPLS LDP session between the headend and tailend routers?
 A. Configure the interface bandwidth to handle TCP and UDP traffic between the LDP peers
 B. Configure a Cisco MPLS TE tunnel on both ends of the session
 C. Configure an access list on the interface to permit TCP and UDP traffic
 D. Configure a targeted neighbor session.
Correct Answer: B

482. Refer to the exhibit. A network operator is attempting to configure an IS-IS adjacency between two routers, but the adjacency cannot be established. To troubleshoot the problem, the operator collects this debugging output. Which interfaces are misconfigured on these routers?
 A. The peer router interface is configured as Level 1 only, and the R2 interface is configured as Level 2 only
 B. The R2 interface is configured as Level 1 only, and the Peer router interface is configured as Level 2 only
 C. The R2 interface is configured as point-to-point, and the peer router interface is configured as multipoint.
 D. The peer router interface is configured as point-as-point, and the R2 interface is configured as multipoint.
Correct Answer: C

483. What occurs when a high bandwidth multicast stream is sent over an MVPN using Cisco hardware?
 A. The traffic uses the default MDT to transmit the data only if it isa (S,G) multicast route entry
 B. A data MDT is created to if it is a (*, G) multicast route entries
 C. A data and default MDT are created to flood the multicast stream out of all PIM-SM neighbors.
 D. A data MDT is created to allow for the best transmission through the core for (S, G) multicast route entries.
Correct Answer: B

484. AN engineer is implementing MPLS OAM to monitor traffic within the MPLS domain. Which action must the engineer perform to prevent from being forwarded beyond the service provider domain when the LSP is down?
 A. Disable IP redirects only on outbound interfaces
 B. Implement the destination address for the LSP echo request packet in the 127.x.y.z/8 network
 C. Disable IP redirects on all ingress interfaces
 D. Configure a private IP address as the destination address of the headend router of Cisco MPLS TE.
Correct Answer: C

490. An engineer configures GigabitEthernet 0/1 for VRRP group 115. The router must assume the primary role when it has the highest priority in the group. Which command set is required to complete this task?
interface GigabitEthernet0/1
ip address 10.10.10.2 255.255.255.0
vrrp 115 ip 10.10.10.1
vrrp 115 authentication 406630697
A.
Router(config-if)#vrrp 116 priority 100
B.
Router(config-if)#standby 115 priority 100
Router(config-if)#standby 115 prompt
C.
Router(config-if)#vrrp 116 track 1 decrement 10
Router(config-if)#vrrp 115 preempt
D.
Router(config-if)#vrrp 115 track 1 decrement 100
Router(config-if)#vrrp 115 preempt
Correct Answer: C

I found one more NEW WUESTIONS. Here is it

NEW QUESTION about SD-WAN was reported elsewhere without solution.
Please come up with a solution.

What are two benefits of implementing a Cisco SD-WAN architecture? (Choose two)

A: It provides resilient and effective traffic flow using MPLS.
B: It improves endpoint protection by integrating embedded and cloud security features.
C: It allows configuration of application-aware policies with real time enforcement.
D: It simplifies endpoint provisioning through standalone router management
E: It enforces a single. scalable. hub-and-spoke topology

@Someone, did you passed already recently on the test?

I’m planning to take test on October 14. (In 2 days)

So I would like to hear from the Admin/@digitaltut for advise whether I’ll proceed or re-schedule.

I don’t want to waste 400$ to fail again the test.

PLEASE ADVISE!!!!!!!

I’M BEGGING ALL TO UPDATE THEIR EXPERIENCED RECENTLY IF ALL DIGITALTUT QUESTIONS ARE VALID.

Thank you all.

@someone
From where did you get these new questions???