Share your ENCOR v1.1 Experience

Passed Exam. Know all the labs and the New questions 1 to 6. The two-hour exam use one hour or less for slims and the rest for the questions. Few new questions

Good morning, excuse me, where can I find the labs that are coming out? Can someone point them out to me? Thanks

Passed the exam yesterday.
6 labs + 54 questions.
Dumps are valid. There are couple questions that I never saw. But mostly came from v1.1, but there are still some questions from v1.0.
Labs are valid. LACP, OSPF, eBGP,VRF,Netflow,COPP….
Thanks to digitaltut …

sorry,help me, can you write to me on my email where to find the questions and the labs to practice? version 1.1 I don’t understand what it is. Thanks
email: {email not allowed}

excuse me, but how do I find these labs from Dump?
{email not allowed}

@Alessia you´ll need to subscribe for a member, then you will have access all the content of this site also the labs.
Version 1.1 means ENCOR v1.1 Questions (1 to 6) in the right top corner of this page.

Are ENCOR v1.1 Questions – Part 1 to ENCOR v1.1 Questions – Part 6 enough for test

Hi guys,
I need some help please. I need a model /image of the a switch with fastethernet interfaces. I am doing labs (101 CCNP LABS” book, written by Paul Browning) in eve-ng, and the switches I uploaded have gigabitinterfaces and or ethernet interfaces, no fastethernet interfaces.
Thanks in advance for your help.

passed the exam. 6 6 first questions were labs from here: VRF sim 2,Netflow, EBGP sim 2, LACP root Bridge, OSPF summarization sim 2, ACL & CoPP. 54 other questions from part 1-6 and maybe 10 to 15 new. Just study well the labs and good amount of question is enough to pass.

Just pass today lots of new question. My subs is already expired im not sure that was included in Update in Part 7 v1.1

Exam Labs
OSPF /17
LACP
Netflow
BGP 2
CoPP
VRF 2

Passed! Many thanks to Digitaltut!

Completed 6 Labs and 54 questions:
eBGP Neighbor 1 & 2 (different AS numbers)
ACL & CoPP (Telnet)
OSPF Summarization 2 (appeared twice)
OSPF DR/BDR 2

Encountered 2-3 new questions. Most items were covered in v1.1 Part 1-7.

Followed Digitaltut’s recommended approach for exam preparation, with the exception of completing the Big Composite Quiz 10 times—I successfully passed it 5 times in a row instead, while focusing on studying the labs thoroughly.

Hey, thanks sptut. Labs are valid. I passed my exam on 18th of april.
I havr got the followings lab:
Ospf
Vrf
Acl&copp
Ebgp
Lacp
Netflow

Passed Exam today.
Lab
—-
ebgp (address family mode)
ACL – CoPP (ICMP)
OSPF
Netflow – Sim2
VRF – Sim2

Thank you Digitaltut.

Hi @Digitaltut,

What is happening with the questions quizzes?

When trying to take a quiz of 100 questions, I get the error “Error Occurred:error(undefined) error”

What is going on? I have btw a normal subscription.

Thanks!

Passed my exam today.
Labs are exactly same.
ENCOR v1.1 part 1 to 7 are more than enough to pass the exam.

@digitaltut,

still same error: “Error Occurred:error(undefined) error”

So when I click e.g. at “or practice all 100 questions of this part 4 at All ENCOR v1.1 Questions – Part 4” or any other part and I click at submit, it comes back with that error.

I tied to remove cash etc, and reset the browser, and even tried another browser, same issue.

Anyone else please can confirm?

@digitaltut,

Weird, it works now.

I failed the exam. If I retake it, how much will the questions have changed?

@digitaltut
If I study all the questions related to one topic (ex. Wireless), will I see new Wireless question in the ENCOR v1.1 questions 1 to 7 or old ENCOR questions part 4 to 11. Or all the questions related to the Wireless topic from ENCOR v1.1 questions 1 to 7 and old ENCOR questions part 4 to 11 will be exist in the “Wireless Question 1, 2, 3” ?

Passed my exam today.
Labs are exactly same.

passed everything is in here. Encor 1.1 p1-7 enough for test

There are new questions but as mentioned at the beginning of the test these questions have no scoring value and are being evaluated for future test.

The labs were:
VRF Configuration 2 (no tun interface)
eBGP Neighbor Sim
OSPF Summarization
LACP & Root Bridge Sim
NetFlow Sim (ICMP)
Access-list & CoPP Sim (ICMP)

@AnonymousApril 28th, 2025
Well done for passing and thank you very much for this information.
Could you please clarify which eBGP Neighbor Sim you were given – was it Sim1 (no address family) or Sim2 (address family).
Thanks again.

Hello guys,
I need some help please. I need a model /image of the a switch with fastethernet interfaces. I am doing labs (101 CCNP LABS” book, written by Paul Browning) in eve-ng, and the switches I uploaded have gigabitinterfaces and or ethernet interfaces, no fastethernet interfaces.
Can any body helps me?
Thanks in advance.

Hello Friends,

I passed today. If you study ENCORE v1.1 Part 1-7; more than enough because all Qs are covered.
Regarding LAB you need to grasp the concept as IP address , BGP AS number are different.
I got below 6 Labs:
VRF Configuration 2 (no tun interface)
eBGP Neighbor Sim
OSPF Summarization
LACP & Root Bridge Sim
NetFlow Sim (ICMP)
Access-list & CoPP Sim (ICMP).

Best of Luck!

Thanks to the TEAM of Digital TUT for the efforts; really appreciate.

@Amer Sayeed

both VRF sims has interface tunnel, what do you mean by (no tun interafce)?

@Digitaltut

can I download a PDF file contains the questions for each section? .. Or I have to be online and open the website to see the questions?

does the question still valid?

Can I please ask for a copy of any dumps?

monty213 @ live.co.uk?

Thanks guys

I passed yesterday. If you study ENCORE v1.1 Part 1-7; more than enough because all Qs are covered.

I got below 6 Labs:
VRF Configuration 2
eBGP Neighbor Sim
OSPF Summarization
LACP & Root Bridge Sim
NetFlow Sim
Access-list & CoPP Sim

@michaelangelo did you register as premium member for you to be able to pass?

@Happier Yes. It’s the only way to unlock all the content.

@Michelangelo
Can I download the question in a PDF file if I’m a premium member?

@Michelangelo .. I also want to ask you did you study the old ENCOR Questions Part 4 to Part 11? … and Did you get any new questions not exist in ENCOR v1.1 Part 1-7?

Passed the exam today, focus on automation and wireless, near half or more than that are from these 2 topics.

for labs wireless, try to know what commands to enter, the steps and logic/rational behind it, rather than memorizing the commands, during the exams when you get nervous, you might forget which command to use first.

Learn to use the ? and tabs during labs, all the best.

typo above, i mean for all labs.

there are labs for wireles?

@Michaelangelo, part 1-7 only have labs or with others questions

Passed the exam. All but 5 Q were from this site’s 1-7 section. I failed one lab, as my mind stuck and couldnt remember commands but still manage to pass.
Good luck everyone and thx digitaltut!

@Morrissey .. did you study part 4 to part 11 ?

@Egypt
No, only 1-7 + Labs.

Hello guys, I have just passed the certification yesterday.
Questions were from ANY section, new one last ones and specific topics.

I had 6 Labs EXACTLY THE SAME:
VRF Configuration
eBGP Neighbor Sim
OSPF Summarization
LACP & Root Bridge Sim
NetFlow Sim
Access-list & CoPP Sim

Thank you digitaltut!!

Also 54 questions plus 6 labs? Were there no new questions? In my previous exam (30 days ago), although I don’t remember exactly, I encountered questions I hadn’t seen here, especially about wireless

Please share dump

Hello, I don’t see “New questions 1 to 6” on the web to study. Where can I find it?

I passed the exam today.
Encountered 3-4 new questions (not part of either v1.0 or v1.1)
Total 6 Labs
VRF configuration Sim 2
eBGP neighbor SIM (address-family)
Access-list & CoPP Sim(ICMP)
NetFlow Sim 2
OSPF (network)
LACP & Root Bridge Sim

v1.1 Part 1-7 is sufficient to pass the exam.

Got 350-401 updated questions answers from Certionary .com and passed my exam.

@Rebekha, Do the questions on Certionary .com match those on digitaltut v1.1 1-7?