Share your ENCOR v1.1 Experience

I took my ENCOR exam today and passed. The questions from the premium account is reliable.
LAB take came out for me:
1.vrf2 sim
2.ebgp neighbour sim2
3.netflow sim
4.LACP & root bridge sim
5.OSPF summarization sim2 ( /17)
6. access list and CoPP sim
i Studied and practise the questions here for 1 month before taking exam.

Hi @mckenzie , What do you read version exam V.1.1 or V.10 or both?

@AE86 Because i dont know which question will be coming out so i went through all the V1.1 (part 1-7) and old-Encor part 4-11 and the questions on the right for each Topics. Some are repeated questions.

@mckenzie Thake you.

Hi Guys,
Anyone has passed concentration exam? I’m taking ENCORE today, then I need to take any concentration exam in 3 days. I need valid dumps.

Does anyone know the website for 350-601 digital tut?

do you only get to see this 1-7 dumps every one keeps talking about when you go for premium?
Also would the questions be well arranged.

@Fireman
V1.1 (part 1-7) and old-Encor part 4-11 Questions are in exam mode so you can see your results and answer after submitting it.
and all the labs with online simulator/eve NG for most of the lab which is easier for us.
I can study whole book but the questions in exam may not be what we expect!

I took my ENCOR exam today and passed.
I read version exam V.1.1
LAB
1.vrf
2.ebgp neighbour
3.netflow
4.LACP & root bridge
5.OSPF summarization
6. access list and CoPP
i Studied and practise the questions here for 2 month before taking exam.
i Studied V.1.1 Part 1-7 .

A few days ago, I passed ENCORE.

6 Labs:
VRF Configuration Yes
Rapid PVST+ and LACP Yes
eBGP Neighbor Yes
NetFlow Yes 2
OSPF Advertised & Summarized Yes
VRF Configuration Yes 2

54 questions, 9 of which were on Programmability.

80% of the questions were v1.1 from parts 1 to 7.
20% of the questions were from older versions.

When I took it, I was sure the labs were correct, and of the 54 questions, I’m sure I got 42 right.

I studied all the content beforehand and found the website about 15 days ago.

Thank you @digitaltut, excellent content to review and prepare!

Passed ENCOR very recently:
6 Labs:
VRF Configuration 2
eBGP Neighbor 2
LACP & Root Bridge
NetFlow 1
OSPF Advertised & Summarized /18
Access-list & CoPP Sim

I’ve practiced parts 1 to 7 of v1.1 only, and all 54 questions were from that sections.
I prepared only 4 days prior the exam. My earnest thanks to @digitaltut team for great content that has helped me to sort out the exam in tight time schedule.

Passed Exam today!
Lots of programming/automation and drag and drop questions. I suggest you memorize at least the answers if you can’t understand.
You have to perfect all the Lab.
All 6 Labs shown for me

LACP-RootBridge:
You have to hardcode the trunk properties on the interface. Po already configured

ACL-CoPP (SSH version):
Check the access-list number and show commands if you did it right

Netflow Sim1/2 (HTTP Get version):
This one is mix of both Question 1 from Sim 1 (Just add destination), Question 2 from Sim 2 but require PC1 and PC2 and Question 3 from Sim 1. Make sure you master the commands.

VRF Sim 2:
R1 to configure not R2 but same concept. only vrf definition Finance line is there add the rest and tunnel configuration. ip route vrf Finance 10.10.111.0 255.255.255.0 10.11.11.2 (Don’t forget this route to switch)

eBGP Sim 1:
Different AS 65100,65200,65300. And task 2 has three loopback 0,1,2 to broadcast to R1 and R2.

OSPF Summerization Sim1:
Same

Premium was worth it.
Parts 1-7 are enough but if you want to perfect it review the old questions.
Good luck to next takers, you can do it!

Passed Exam today

6 labs
VRF Configuration 2 R1 config
eBGP Neighbor 1
LACP & Root Bridge
NetFlow 2
OSPF Summarization /18
Access-list & CoPP Sim

Parts 1-7 enough to pass but better to go through old ones.
Lots of automation questions.

hi team, kindly guide and share experience if some one give the exam recently .I am planning to give my exam in next week. is exam stable or changes are being made after wireless exam news

Hi all

I passed the last August 28 and I can say it is a version accurate of this exam.

First: 6 labs:

Netflow Flexibel.
ACL and Copp with ssh.
eBBGP peering plus annous both loop01 209.165.201.0/28 like loop02 209.165.201.16/28.
OPSF configuration in R1 plus Sumarized on both ABRs.
VRF and tunnel config.
Spanning tree Rapid PVST and PO10.

Second:

Mayority of the questions was related with the V.1.1 and OI counted 5 questiion new (do not appear on Digital tut) on of them that I remenber is related at the likely source of WIFI interference, with one option led light LOL.

@Frank can you share the study material at hashim.khan2012137 at gmail dot com

Any update on exam stability. Please let me know.

hello guys
if i may ask im using 31 days before ccnp , and labs ( im good at them ) im really out of money to do membership here , if i may ask is that enough ? i already google here and there but im so afraid im meet things i have never heard if please reply to me !

Passed the exam on 5 Sep. 54 Q&A and 6 Lab Sim

Q&A:
All questions from digitaltut, study v1.1 (Part 1 – 7), old (Part 4 – 11) and All the specific topics under “ENCOR 350-401” category at the right-side menu (from “Architecture Questions” to “Drag Drop Questions 2”) good enough to pass. Got few new questions on automation.

Lab Sim:
1) Access-list & CoPP Sim – Task 2 Version 2 (telnet)
2) VRF Configuration Sim
a. Extend the CORP VRF between R10 and R20 using Tunnel0.
b. Protect Tunnel0 using the preconfigured profile.
c. Ensure the reachability for LAN subnet behind SW10 & SW20 vice versa (static route already configured), need reconfigure R10/R20 port facing SW with vrf CORP
3) OSPF Summarization Sim – /18 summarization
4) eBGP Neighbor Sim 2
5) LACP & Root Bridge Sim
6) NetFlow Sim 2
a) Add collector as destination under exporter
b) Configure the switch port analyzer on Sw1 and mirror all communication to and from PC1 to interface Ex/x using session number xx
c) Configure a HTTP GET operation on R1 to x.x.x.x every 300 seconds.

c) Configure a HTTP GET operation on R1 to x.x.x.x every 300 seconds.

what this mean in what topic is this ??

Hello,
Why the Subnet Mask from the eBGP Neighbor Sim 2 are 248 ?
network 209.165.201.1.0 255.255.255.248
network 209.165.201.1.8 255.255.255.248

@ABC,You have to understand bgp 1st which means if you dont use keyword MASK then bgp takes classfull address by default like /24,/16,/8
However it is good practice to use “mask” keyword while you advertise network in bgp configuration so that you tell to the router please take my specific subnet.I guess you need to read more BGP.Many thanks

Thanks a lot for your answer, but I’m wondering why the SM for subnet not for host as the Q was mentioned to advertise loop back address for L0,L1,L2 networks, so why it’s not like eBGP Sim 1(Host Mask : 255.255.255.255).
The SM of eBGP Sim 1 Q is : 255.255.255.255 to advertise only the loopback IPs.
The SM of eBGP Sim 2 Q is : 255.255.255.248 to advertise a subnet of what (as the Q mentioned loopback L1, l2).
Thanks,

@ABC task 2 question was asking to advertise “network”. while /32 or 255.255.255.255 is a host.

I had my exam today! I have studied only Q1-7 + Labs! Do not do my mistake, check the old questions, architectural bla bla (30% of questions i didn’t saw it and i think they are form the old part). It was hard! Good luck to everyone!

Crisstim : there was automation and programming qurstions out of the ordanary ? what old qst u mean ? ony the architectural or all of them ? cong btw *-*

I have PASSED the exam today Sept 09. prepare for 20 days before I take the exam. I finished ENCOR with 1 hour remaining on my clock.

Studied V1.1 Part 1-7 ONLY, 10-12 questions are not familiar to me, I don’t know if they were from V1.0 Part4-11 since I didn’t study them. most of them are automation, some of the new questions are json basic format. easy to interpret, just check the syntax carefully “,[]{}

All of D&D are from V1.1 Part 1-7, I don’t remember how many but I think they were 4 D&D.

Lab is accurate with minimum changes. These were the Labs I’ve got

1. eBGP Neighbor Sim2
2. Access-list & CoPP Sim version3 (source subnet is different from sim so you need to read the task carefully)
3. Rapid PVST+ and LACP Sim (No VLAN restriction stated on the task for trunk, I noticed when I configured the spanning tree VLAN root primary, and I verified using show spanning-tree, VLAN10 priority is 8192, which can surprass if we have switch with lower priority no., so I set the priority to 0, same function with root primary. just to make sure.)
4. VRF Configuration Sim 2 (FINANCE instead of Finance, case sensitive)
5. OSPF Summarization Sim (task2 version2)
6. NetFlow Sim 2 (in task3 IP SLA, PC1 is not pingable from source interface of R1. I don’t know if intended by the exam, you can verify using show ip sla summary)

Thanks, Digitaltut!

Hello! Passed the exam today, the same 6 labs as above (with different versions of the tasks, but nothing new). 54 questions and D&D. I studied V1.1 parts 1-7, and with 3 exceptions, everything was from here.

Read the official book, build yourself a lab somewhere to train and check different scenarios, prepare with the questions from here (great explanations, by the way) and train with the labs and you should be able to pass. The important thing is the knowledge you gain!

Thank you Digitaltut for everything! :)

I passed the exam today, most of the quest were from ENCOR V1.1 i got 54 questions and 6 labs just try to learn the V1.1 and the labs .and I got these labs,
OSPF Summarization Sim 2
Access-list & CoPP Sim
VRF Configuration Sim
NetFlow Sim 2
eBGP Neighbor Sim 2
OSPF Summarization Sim
LACP & Root Bridge Sim

Thanks @Digitaltut team :)

I passed the exam. Most of the questions were from the old ones. You have to check them all.
Some questions from V1.1. Labs are the same.
Good luck with the exam.
Thanks to the community.

@coldplay30 thanks for sharing your experience, am going in soon, please tell me about the propotions on blueprint, is it still 30% INFRASTRUCTURE, 15 AUTOMATION, 10 ASSURANCE, etc or its changed, I hear nowadays the exam is mostly automation and witeless, kindky enlighten us brother

Hi to everyone. The CCNP ENCOR exam is not focused anymore on technologies like STP, VTP, trunks, even no more BGP, OSPF, EIGRP, Multicast, etc. It is focused mostly on: Wireless, WLC, Wireless security, Programmability, Automation, Cloud, Virtualization and so on. This exam is never more about routing and switching.

Just passed today.MCQ all valid on v1.1 however you have to read all and your accuracy has to be 100% while you take test on Digitaltut.If less then probably you will be fail.
Regarding LABs:
1. Access-list & CoPP Sim
2. OSPF Summarization Sim [not Sim 2 and Create a summarized route /17]
3. VRF Configuration Sim [not Sim 2 ]
4. NetFlow Sim [not Sim 2 ]
5. eBGP Neighbor Sim 2
6. LACP & Root Bridge Sim
My recommendation is practice all Labs of Digitaltut.

Thanks from my heart to Digitaltut for passing the exam.

Hey bro, what do you mean (not Sim 2) do you mean, its not the same as SIm2

Whats the count of questions from in here, estimation?

Some of the simulation Labs has more than one in Digitaltut like below:
NetFlow Sim
NetFlow Sim 2
I have faced like “sim” and “Sim 2” Lab.Hope this will help.Thanks
60questions i have faced in exam.

Hey bro, what do you mean (not Sim 2) do you mean, its not the same as SIm2
Ans: Yes

Total 60 questions

Thank you so much my bro, am going in in 10 days, I think am quite there, just a polishing up some stuff, Congratulations for passing your exams!! All the best with Core

Hello everyone, I will be taking the exam in the next 7 days. Could anyone share the labs?

Please share the latest dump for 350-401 ENCOR to mka4humza(at)yahoo(dot)com Thanks,

Any one take exam these days can tell us which dump is valid?

I passed the test recently and as many have stated there were 54 questions with 6 SIMs. The SIMs mentioned above are accurate and should be studied carefully.

Hello, yesterday I passed the exam, the labs are correct, I found new questions but in general the information is correct, thank you digitaltut.

Passed today. Lots of new questions. Labs listed above still there.

Congratz, what about the other 54 questions, how many were new or from in here

Any one confirms the labs that are stable in the exam? Some one posted 100 days ago that he got different labs

GB, so new questions you are referring to meaning not covered on the premium section here ? this is concerning

correction:
Any one confirms the labs that are stable in the exam? Some one posted 10 days ago that he got different labs