Share your ENCOR v1.1 Experience

Can we have a composite quiz with only v1.1 questions, thanks

@Naruto

Congrats. The MCQ questions that you got were they all from v1.1 or from v1.0 as well? Do you recommend studying v1.0 (part 4-11) ?
Thanks

Hi @Sihle!
Congratulations!
Could you please share the EVENG simulation files at {email not allowed} ?
Tia

The EVE-NG Files are available to download next to each lab on this site, I would say study both the v1.1 and old part 4-11 questions that should be enough. For labs please practice all of them especially VRF Sim 1 & 2, Netflow Sim 1&2, Access-list & CoPP Sim,eBGP Neighbor Sim 2 & Sim1, LACP and all the OSPF
Sims here.

Are all the questions here still updated ?

I took the exam today and passed.
It consisted of 58 written questions and 6 lab tasks, which were presented in random order. The questions primarily focused on SD-Access, SD-WAN, and wireless technologies, and there were no questions related to routing protocols such as OSPF or BGP.
The lab tasks were as follows:
LACP & Root Bridge Simulation / eBGP Neighbor Simulation / VRF Configuration Simulation / Access List & CoPP Simulation / NetFlow Simulation / OSPF Summarization Simulation
Since the initial configurations differed from the EVE-NG files, it is important to verify the existing configuration beforehand using do show run. (Commands such as do, Tab, and ? were available.)

To deepen my understanding, I studied ENCOR v1.1 Questions (Parts 3–7) and practiced the labs with the help of ChatGPT. However, I should have spent more time on lab practice. That said, thanks to digitaltut, I was able to pass the exam. Thank you!

@Thank Congrats, can you say that questions on digitaltut is valid or not?

Hi Can someone share the questionaires? plssss?

Who has the questionaires? Can someone share ples

Can someone please share the recent dumps here nu9783790 @ gmail.com please help me. I cant afford to fail. I have no money to retake

@Naruto you need to buy Premium Membership and you will find all the questions and the labs

For netflow Sim 1 do they tell you the destination address of the collector to be configured in the Exporter? The sim just guesses where to send it.

Guys, please share your experience

Someone please help me with the destination address of the collector in Netflow Sim 1

I passed the exam. The simulations are from EBGP SIM2, OSPF SIM2,LACP&ROOT SIM,NETFLOW SIM2, ACL&COPP. I spent almost over hour to finish the simulation but couldn’t complete all. I studied questions from ENCOR 1.1~7.
OSPF – /17 summary route for area 40. use network statement under OSPF process.
ACL&COPP-Permit ICMP traffic.
Neflow SIM2 – IP SLA Echo.
Also check interface status to ensure it is u.

Thanks, Digitaltut! I passed. I studied Version 1.1, sections 1–7 only, and studied the 6 simulations mentioned above.
LACP & Root Bridge Simulation / eBGP Neighbor Simulation / VRF Configuration Simulation / Access List & CoPP Simulation / NetFlow Simulation / OSPF Summarization Simulation
Just a quick tip: make sure all interfaces are up, as some appear administratively down and ICMP traffic permit.

Did they specify the address of the netflow collector? Is it mentioned anywhere?

From what I recall, the NetFlow collector setup does not require an additional collector; it only requires configuring a basic IP SLA echo operation, not HTTP.

Thanks for the prompt reply. What I meant was
In task 1 in the sim here they ask you to do this.

Complete the Flexible NetFlow Flow Exporter configuration on R1 to send data to the collector using UDP port 2055.

They specify the port number but not the ip address of the collector in the question. The solution here guesses that PC2 is the collector and sends the data to PC2. However I was wondering in the actual exam if there is any indication as to which is the actual collector.

Can you access the Switch to check if there is any description on it’s interfaces that says it’s connected to the collector?

let me know any question are update or not?? i have a plan to take 6/1/2026. help me pls

Hi Guys, what do u guys think about SPOTO for dumps.
i want to take the ENSLD – 300-420 Exam.

So would you say that you only had questions from 1-7 on the exam? Or did you study 1-7, and it was enough for you to figure out any questions outside of 1-7?

@Anonymous Congrats. were all the questions from v1.1 or did you get any questions from part 4-11? Thanks

do any of the question listed according to the topic names at the side e.g Architecture Questions, appear in the exam? Has anyone who passed studied them?

Haaa Digitaltut muri huchi, sugar chaiyo, zvima trabablas munodadisa uum ndakaupai sando dzenyu. muri vakuru apana anotamba nemi akanyadziswa, garai kure nemoto. ko hamuchi support cloud ne security here… magonero enyu please huyai ne zvimwe zve cloud ne security certifications. Titende!!! Tiise michinjiko mitatu.

Hello, I passed on 12/31. 6 labs were EBGP, OSPF, LACP&ROOT SIM, NETFLOW, ACL&COPP, and VRF. I dont remember which versions. I do remember that for the tunnel I had to use ” tunnel protect ipsec profile MyProfile” as task 2 it was not optional. I counted 11 questions that were not on ENCOR 1.1 part 1 – 7, so not sure if these were new questions or real old questions. Good Luck!

Passed the exam a few days ago. Only studied ENCOR v1.1 Questions – Part 1 – Part 7 and SIMs.

6 Labs: ACL & CoPP, eBGP, LACP & Root Bridge, Netflow, VRF and OSPF Summarization.

54 Questions: 6 or 7 new questions but can be answered using the questions included in the ENCOR v1.1 Part 1 -7.

Hope this helps! Thanks DigitalTut!

What was the task in the Netflow Sim?
Were the source and destination in the exporter specified in the task?

I passed the exam today, all questions from DIGITUT and couple new questions. LAB are exactly same with different IPs

LACP & Root Bridge Sim
eBGP Neighbor Sim 2
VRF SIM 2
NetFlow Sim 2
ACL and COPP sim
OSPF Summarization Sim 2

Netflow was configured with Source and UDP, needed to configure destination IP and export-protocol.

Do they tell you the destination ip to use for Netflow?

please where to find the labs and sim

Yes, they will mention the destination IP.

Thank you very much and congratulations on passing.

Hi all,
Happy new year l.
Can someone please share the questions with me, I need to pass it ASAP.

Cheers,
Eric

Hey Anonymous-Eric , nothing in life is for free , please purchase the subscription .
It’s ethical as well :)

Hi Warner, Could you please explain me about subscription. am i going to get MCQ, D&D and lab sim. sorry for the question. i am totally new for diditaltut. Thanks …

Yes. You get all the MCQs, D&D and labs

If I’m applying to take the exam, is the information here still up-to-date?

Which command has everyone been using for root bridge sim?

‘spanning-tree vlan 10,20,30 root primary’

or

‘spanning-tree vlan 10,20,30 priority 0’

Dear @Warner, Thanks for the info

is the dumps still valid ?

I passed the exam today, all questions from DIGITUT and couple new questions. LAB are exactly same with different IPs

LACP & Root Bridge Sim
eBGP Neighbor Sim 2
VRF SIM 2
NetFlow Sim 2
ACL and COPP sim (ospf)
OSPF Summarization Sim 2

thank you

Dear @rick
The ‘…root primary’ is the best practice. The ‘…priority 0’ is a manual hard-set which doesn’t allow further hierarchy (e.g secondary root). So i always use the first option.

@la7ci9
Thank you very much. I’ve been agonising about that for several days.

Hello Guys, I passed that composite exam more than 50 times and what do you think i am ready for real exam? I known Subjects and Topics deeply and i can make that labs without any problems.

Please Share Your Thoughts.
Good Luck!

Hi BUSA, Can you please share your experience after you go for the test? scheduled mine for sometime in March just before the new version rolls in, but i am keen to know if i can have it done sooner. thanks.

@Bee
How do you know there is a new version in March?

@goro
https://learningnetwork.cisco.com/s/encor-exam-topics

Has anyone given the exam lately? Are all the questions here still valid? Haven’t seen any posts after Jan 8th