Home > Share your ROUTE v2.0 Experience

Share your ROUTE v2.0 Experience

January 22nd, 2015 in ROUTE 300-101 Go to comments
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here.

The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.

Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

Note: Posting email is not allowed in the comment section.

Your posts are warmly welcome!

Comments
Comment pages
1 131 132 133 134 135 391 1008
  1. boyi
    May 28th, 2018

    Hi all!

    can anybody share Jazzy DnDs and Prince 91Q

    i have to renew my CCNP as soon as possible.

    thanks!

  2. doka1
    May 28th, 2018

    @Kir

    sh logging

    Log Buffer (8192 bytes):

    *May 28 11:25:31.795: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
    *May 28 11:25:46.315: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
    *May 28 11:25:46.323: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    *May 28 11:25:46.987: %SYS-5-CONFIG_I: Configured from memory by console
    *May 28 11:25:47.347: %SYS-5-RESTART: System restarted —
    Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version 15.2(4)M2, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Wed 07-Nov-12 18:15 by prod_rel_team
    *May 28 11:25:47.375: %SNMP-5-COLDSTART: SNMP agent on host R1 is undergoing a cold start
    *May 28 11:25:47.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
    *May 28 11:25:47.455: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
    *May 28 11:25:47.455: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
    *May 28 11:25:48.331: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
    *May 28 11:32:48.915: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to down
    *May 28 11:32:58.139: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
    *May 28 11:33:04.407: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to down
    *May 28 11:34:30.699: %SYS-5-CONFIG_I: Configured from console by console

    B. Debug messages are logged ONLY on active console connections, but it’s logged to a active console AND to the buffer.

  3. M
    May 28th, 2018

    What DND is “adverse network conditions” ??

  4. Mac
    May 28th, 2018

    did anyone passed today? Any updates? I’m taking the exam tomorrow.

  5. Tata
    May 28th, 2018

    I’ll take my exam today… later I’ll report what was like! Good luck to everyone that is taking the exam today as well! :)

  6. stoo
    May 28th, 2018

    Passed. Labs: EIGRP SIM, OSPF SIM, EIGRP STUB
    DNDs: AAA, Frame Relay Component, ACL types
    All questions rom 91q and all labs here from digitaltut (i used premium)

    good luck everyone

  7. Mac
    May 28th, 2018

    @stoo Congrats man! what is your score?

  8. boyi
    May 28th, 2018

    can anybody share the 91q dump in vce format? i’m no table to find it

    thanks

  9. stoo
    May 28th, 2018

    @Mac
    8XX

  10. thedude
    May 28th, 2018

    I saw a new question about Netflow version 9, it was like, which of the following is true (select 2)
    -Is Cisco proprietary
    -Supports ingress and egress


    don’t remember the other 2 options

    Anyone got the same?

  11. Anonymous
    May 28th, 2018

    @thedude
    It’s not correct.

    -IETF standard
    -Supports ingress and egress

  12. stoo
    May 28th, 2018

    @thedude

    I can confirm this question in today’s exam

  13. Hector
    May 28th, 2018

    @stoo
    can you share me your labs, please!

  14. CertPrep Nickname
    May 28th, 2018

    .
    Just a quick confirmation please guys, for the Jazzy AAA DND, we all know that the answer is incorrect, can we confirm that the CORRECT answer is as below:

    AUTHENTICATION:
    – Supports a local database for device access
    – Supports Encryption

    AUTHORIZATION:
    – Enforces time periods during which a User can access the device
    – Specifies a User’s access priviliges

    ACCOUNTING:
    – Verifies network usage
    – Not supported with local AAA
    .
    .
    Can anyone please confirm this is correct instead of the Jazzy PDF?

  15. doka
    May 28th, 2018

    Features of Netflow version 9? (Choose two)

    A. IEEE standard
    B. IETF standard
    C. ingress
    D. egress
    E. ingress/egress
    F. Cisco proprietary

    Answer: B E
    From digitaltut Premium

  16. Prime
    May 28th, 2018

    Congrats Anonymous!!… Could you share this dump?

  17. Anonymous
    May 28th, 2018

    @Prime
    Anonymous is a scammer!

  18. doka
    May 28th, 2018

    It’s was from me :)
    “Anonymous is a scammer!”

  19. Anonymous
    May 28th, 2018

    If someone could please verify the AAA DND above that would be great

  20. student
    May 28th, 2018

    hello ,
    who is Jazzy aznd how i can get his dumps
    someone have new vaild dumps to study ??

  21. route police
    May 28th, 2018

    hi all,
    I come back from my exam.
    sweat.. I get pass with 87x
    thanks God.
    I din read Jazzy v3 at all, it would be good if you see it.
    it is few question which is new to me, I guess it might have cover in jazzy v3? the new DnD is about AAA authentication. but it is not hard.
    I been prepare using digital tut (which I highly recommend), dexter which is second good.
    I last minute read prince 91, which is really thanks God! prince 91 is important, it cover most of the question that I din see in digitaltut and it come out from exam~!
    and those confusing question, all come out.
    that’s why I am sweat!

  22. route police
    May 28th, 2018

    the confusing question that I get is those question that have different answer with digitaltut and passleader.
    I din read finish passleader, it make me feel very confuse.
    oh ya, I forget to mention, I actually read 477 too.
    below is the confusing question I get and I still remember it now.

    1.
    Which command prevents routers from sending routing updates through a router interface?
    A. default-metric 0 B. distribute-list in C. passive-interface D. distribute-list out
    *I chose C

    2. Which Cisci Express Firwardiog table ir tables hild firwardiog iofirmatio?
    A. FIB table ioly
    B. adjaceocy tables ioly
    C. FIB aod adjaceocy tables ioly
    D. FIB,RIB, aod adjaceocy tables

    I chose C

    3. Wheo a packet is deoied by ao IPv6 trafc flter, which additioal actio dies the device perfirm?
    A. It scaos the rest if the ACL fir a permit eotry matchiog the destoatio
    B. It geoerates a TCP Fio bit aod seods it ti the siurce.
    C. A creates a oull riute fir the destoatio aod adds it ti the riute table
    D. It geoerates ao ICMP uoreachable message fir the frame.

    I chose D

  23. route police
    May 28th, 2018

    ow now only I see above Doka say about

    Features of Netflow version 9? (Choose two)

    A. IEEE standard
    B. IETF standard
    C. ingress
    D. egress
    E. ingress/egress
    F. Cisco proprietary

    Answer: B E
    From digitaltut Premium

    I saw this new question too.

  24. route police
    May 28th, 2018

    When a packet is denied by an IPv6 trafc flter, which action the device perform?
    I chose
    D. It geoerates ICMP uoreachable message

    which cef table hold forwarding data.
    I chose
    FIB and adjacencies

    Which command prevents routers from sending routing updates through a router interface?
    A. default-metric 0 B. distribute-list in C. passive-interface D. distribute-list out
    I chose C
    and u need to know passive interface is do at router or interface

  25. route police
    May 28th, 2018

    all labs are the same.
    so even if there is some new question, the dumps is still enough for you to pass the exam.
    read digital tut, dexter, 477 and verify those answer that is conflict. 477 have many mistakes, so refer to digital tut for the correct answer

  26. route police
    May 28th, 2018

    thanks everyone who contribute, really thanks to you all.

  27. Kir
    May 28th, 2018

    @doka1

    I understand You but for me letter B is more reasonable.

  28. Anonymous
    May 28th, 2018

    AUTHENTICATION:
    – Supports a local database for device access
    – Supports Encryption

    AUTHORIZATION:
    – Enforces time periods during which a User can access the device
    – Specifies a User’s access priviliges

    ACCOUNTING:
    – Verifies network usage
    – Not supported with local AAA
    .
    .
    Can anyone please confirm this is correct instead of the Jazzy PDF?

  29. Kir
    May 28th, 2018

    @Anonymous

    Yeap, it’s correct man.

  30. Mustafa
    May 28th, 2018

    @route police
    about Q:Which command prevents routers from sending routing updates through a router interface?A. default-metric 0 B. distribute-list in C. passive-interface D. distribute-list out
    it should be “D” because there is no command passive-interface on interface privilege mode only on router privilege mode, also if you see the Q it saying sending that is mean “out” which is appear on answer “D”

  31. Anonymous
    May 28th, 2018

    Question 14

    Refer to the exhibit.

    show_ntp_associations.jpg

    A network engineer has configured NTP on a Cisco router, but the time on the router is still incorrect. What is the reason for this problem?

    A. The router is not syncing with the peer, even though the NTP request and response packets are being exchanged.
    B. The router is not syncing with peer, and the NTP request and response packets are not being exchanged.
    C. The router is syncing with the peer, and the NTP request and response packets are being exchanged.
    D. The router is dropping all NTP packets.

    Guys this Q on Jazzy 477 and Q1 has been chosen as answer “A” but on Digitaltut is “D” so which source is correct?
    Thanks

  32. Mustafa
    May 28th, 2018

    Question 23

    Which technology is required on an EVN trunk interface?

    A. 802.1q
    B. NAT
    C. VRF-Lite
    D. IS-IS

    Guys, this Q on digitaltut is giving wrong answer which is C, but it should be ” A” according Jazzy 477 also follow up this link below,

    https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-overview.html

    If an EVN trunk is configured on an interface, you cannot configure VRF-Lite on the same interface

  33. route police
    May 28th, 2018

    oh ya, this question also asked in my exam.
    Question 23

    Which technology is required on an EVN trunk interface?

    A. 802.1q
    B. NAT
    C. VRF-Lite
    D. IS-IS

    I answer A

  34. route police
    May 28th, 2018

    @Mustafa,

    in the exam, the answer have passive interface on router mode and passive interface on interface mode, and answer D also. I don’t know whether I am wrong on that question btw. because this Q is very tricky, for me, I think passive interface is more appropriate.

  35. Lackadaisical_Cisco
    May 28th, 2018

    Can anyone please help me , where can I get the Cisco ios “c7200p-adventerprisek9-mz.152-4.s4.image” to practice the CCNP route lab?

  36. Lackadaisical_Cisco
    May 28th, 2018

    To practice all lab on GNS3

  37. Mustafa
    May 28th, 2018

    Thanks @route police, now I have GNS3 then I listed help command in interface config mode it not showing passive-interface, only it listed on help command of router config mode!
    in this case if it is passive-interface so the question it is not related to “sending update” or “interface” but these 2 words has been mentioned on the question.
    And all we know find the answer through the Question! right?

  38. cisconinja
    May 29th, 2018

    Hey guys, I have jazzy v3 but I need prince 91. Can you guys help?

  39. Network_Engineer
    May 29th, 2018

    Hello guys,

    Just come back from my exam. I pass it, but with 8xx point which were a little disappointed me due to I study very hard, but there were some new questions and tricks. However I finished 1 hour before the end of the exam (I did it very fast-it was surprise for me)
    53 Questions – most of the questions from Jazzy 91
    LABs
    – EIGRP Stub
    – EIGRP Eval
    – OSPF Eval
    – PBR

    The question with Netflow mentioned above was also in my exam as well as the question for passive interface,but they are already discussed here and some new questions (3-4) which I didn’t see anything before.but I didn’t remember them-they were easy.

    I face as well a new re-phrased question.

    All interfaces on each router are participating in the EIGRP 100 process. Interface Loopback 2 on HQR2
    is currently in shutdown mode. An engineer issues the eigrp stub command on router BR1. Which
    statements about the query messages sent from router HQ-R2 for a route to reach the
    12.12.12.12/32 network is true?

    It was re-phrased with different answers. The topology is the same as in the dump but the question was little different.
    They asked what you can see in routing table of HQ-R1 and you have 4 routing tables to choose.
    I study cisco official book,cbt nugets,some additional materials – after that for practice I use 477q,Prince91,Jazzy91 and some old dumps.

    Don’t worry – 80-90% of the questions were from Jazzy dump, but it is good to check another dumps and of course to learn and understand concepts.
    I hope this will help you. Good luck guys… :)

  40. Paul
    May 29th, 2018

    Just Finish CCNA can i prepare my ccnp 300-101 in two months??
    Or 5 months? advise me plz

  41. yafi
    May 29th, 2018

    @Paul,

    You should take 5 months for CCNP route/

  42. cisconinja
    May 29th, 2018

    In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received by all EIGRP routers within the Frame Relay network? (Choose Two)
    A. Use statically defined EIGRP neighbors on the hub site
    B. Create separate address families.
    C. Disable split horizon.
    D. Use sub interfaces.
    E. Disable EIGRP auto summary.

    Answer A & D

    Can you guys think this over with me? How is creating sub-interfaces will make any difference in a point-to-multipoint?

  43. KA
    May 29th, 2018

    Hi all, Anyone know CCNP Switch dump. Can you all help to share me the dump please.

  44. Mac
    May 29th, 2018

    I just finished my exam earlier. Got 8xx.
    Most of the questions came from jazzy 91 q. There are new questions that are mentioned here in previous pages.
    Labs: EIGRP eval, EIGRP stub, and PBR
    DnD: aaa, dhcp relay, frame relay lmi, GRE feature.

    Thank you everyone. And Goodluck!

  45. Grateful
    May 29th, 2018

    Hi @Cisconinja, I think the correct answer is C & D.
    Regarding Answer D: “Each subinterface is treated like a physical interface so split horizon issues are overcome”.

  46. edd
    May 29th, 2018

    Hi friends!

    I’m back from the exam right now. Pass with 9xx mark

    LABs were EIGRP Evaluation, EIGRP Stub and PBR.
    DnD were DHCP Relay (rewrited options), Frame relay LMI, AAA, Adverse network condition and GRE feature

    New question about eigrp vrf purple… I choose something like …show no-default route table…
    Prince 91q still super valid

    I studie kevin Wallace vídeos, dexter 477q and prince 91q.

  47. boyi
    May 29th, 2018

    @mac
    whats the different between jazzy 91q and prince 91q?

    @god, you have mentioned some pages ago, that you are working on a new version of jazzy, i apriciate if you can share.

    thanks!!!

  48. Mac
    May 29th, 2018

    @boyi same questions. Jazzy compiled all the dnd and labs in the same pdf.

  49. owenshinobi
    May 29th, 2018

    @edd please send dump back to me for update.

  50. Naz
    May 29th, 2018

    Hi Gents
    Just did the exam about 1 hour ago, passed it with 9++

    DND .AAA, Frame-relay, DHCP, Frame-relay New

    New Frame-Relay question was something like to configure serial interface and sub interface with correct encapsulation and mapping the DLCI with given ip address.

    SIMS: Eigrp Eval : Ospf Eigrp Redistribution : Eigrp Stub
    sims are exactly the same .
    Note: On ospf/eigrp i couldnt save the configs on any router, for some reason its been disabled.
    Eigrp and ospf AS/process id’s been altered ,so pay good attention.
    Eigrp Stub : to summarize i used the 10.2.0.0 255.255.240.0 but it didnt work, so i used with /16 and routes were summrized. again you cant save it so dont worry.
    Eigrp Eval: exactly the same as here,but always confirm the configs, for some reason i couldnt run on routers at the beginning,but after like 5 minutes i was able to use it , seems like some kind of a bug,but answers are the same.

    New Q’s : I had one Drag and Drop new frame relay question.
    and about 3-4 new multiple choice question in ipv6.

    if you prepare the questions here, i promise you have a high chance of passing.
    i have prepared all the questions here and simulated alot of labs in GNS3 and on Real kit. Try to get the concept so even if u hit alot of new Q’s you will have a good chance to get it Right.

    Good luck Guys.
    and Thanks to Network TUT


  51. Note: Please do not open any suspicious links (especially short links and links that need to remove some words to open) in the comment section above as they are usually spams and may harm your computer.
Comment pages
1 131 132 133 134 135 391 1008
  1. No trackbacks yet.