Share your ROUTE v2.0 Experience

Passed exam yesterday. A lot of the new questions are allready mentioned here.
D and D and sim also mentioned here. You can pass the exam.

@Syn and anyone who has this DND should please post it, i am yet to see it. Syn said it was in his exam. Thank you

Int S0—-> encap frame relay——–>Int S0.1 multipoint———->frame relay map 192.168.1.1

@ Passed congrats…how many questions did you get in your exam? Did u also get this DND i posted above?

copy run start is disabled on the sims and are not necessary to get full points

1-Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters

i guess is A,C,E

@syn glad to hear you passed mate, sounds like you had fun in there ahaha but jokes aside, well done. Any last tips, im retaking soon, last time i had problems with their computers too so got nervous & made mistakes. Should i take the exam now or wait a little coz they made changes so you know not really sure what to do. One again congrats & good luck with everything you do next.

and one more thing, what dumps should i use now for last minute revision? Thanks

@Mario

I would say maybe 35% to 40% were new questions. The “old” dumps are still needed but they should be updated once the new questions are cleaned up. I still see a few with incorrect answers from my own research looking at Cisco documentation because it’s not in the Official Certification Guide which I read from front to back and go back for clarity on issues.

@Fred

The Labs will let you know if copy run start is working when you try to use it. It will give you an error message that the command isn’t incorporated into the lab.

@Denzel Washington

My hands were literally trembling throughout the exam with the way things started. Lets me know always just work through.
I used Kikavich June v4 update and his DnD and tried to collect as many new questions popped up in here. Practice the labs here. Take it when you feel comfortable. My only fear is the introduce new labs and I didn’t want to delay.

@Anonymous @Mario @Denzel Washington @Ghauri

Use the Kikavich All In One DnD. It has the some DnDs that I haven’t seen on here. I forgot the link but it was posted between pages 146 and 149 I believe.

@syn yh i can imagine mate. Well lets hope no new labs are introduced otherwise another £300 down the drain :( Thanks though, much appreciated.

1-Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters

what are the correct answers for this question?I have been seeing varying answers for this over the past couple of pages in this section

@syn thanks. As for the AAA d&d was it the following?

+ if authenticated – It allows the user to perform the requested function once authenticated
+ none – It instructs the network access server to proceed without requesting authorization information
+ local – It provides authorization for a limited set of functions only
+ krb5-instance – It uses a defined instance for authorization
+ group radius – It uses authorization information from a standards based server
+ group tacas+ – It uses authorization information stored as attribute value pair in a Cisco proprietary server

to pass the exam what do you have to study?

to pass the exam what do you have to study?
the dump -Kikavich All in one is recommended ??

Thanks a lot

These are all the questions that I encountered and I am not sure about their answers. Next week I will take the test. I would be happy if someone would help me and give me an explanation for these questions

1 VPN support for IPv4 and IPv6 address families. Which command enables a VRF that supports these requirements?

a. Router(config-vrf)#route-target 004:006
B. Router(config)#ip vrf CUSTOMER
C. Router(config)#vrf definition CUSTOMER
D. Router(config-vrf)#rd 004:006
ANSWER : C

2 Multicast application must be accessible between sites, but not be accessible outside of the organization. Based on the scoping requirements, the multicast group address for the application will be allocated out of which range?

a. FF00::/16
b. FF08::/16
c. FF02::/16
d. FF0E::/16
answer: b

3. Which routing protocol searches for a better route through other autonomous systems
to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector
answ :A

4 Which type of Netflow information is displayed when the show ip flow export command is executed?

A. top talkers
B. local status and statistics
C. sent status and statistics
D. export interface configurations

Correct Ans: C OR B

5 A network access serve using TACACAS+ for AAA operations receives an error message from the TACACS+ server. which action does the network access server take next ?

a. It attempts to authenticate the user against RADIUS
b. It restarts and attempts to reconnect to the TACACS+ server
c. It rejects the user access request the
d. It checks the method list for an additional AAA option
ANSWER :D

6 Which three methods can a network engineer use to fix a metric based routing loop in the network.

7.a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters

ANSWER:A,C,E or B C E

@Denzel Washington

From what I can surmise. If you have a good grasp of the knowledge of the MCQs then you will fly through the test. I got hit with the labs early. The DNDs were interspersed through the test. Most weren’t that bad. If you don’t freak out on a lab then you should be done in about an hour.

@Exam Next Week

4 Which type of Netflow information is displayed when the show ip flow export command is executed?
A. top talkers
B. local status and statistics
C. sent status and statistics
D. export interface configurations
Correct Ans: C OR B

B.

https://www.cisco.com/en/US/docs/ios/12_3t/netflow/command/reference/nfl_a1gt_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1188401

Examples
The following is sample output from the show ip flow export command:
Router# show ip flow export

Flow export v5 is enabled for main cache
Exporting flows to 10.51.12.4 (9991) 10.1.97.50 (9111)
Exporting using source IP address 10.1.97.17
Version 5 flow records
11 flows exported in 8 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
0 export packets were dropped enqueuing for the RP
0 export packets were dropped due to IPC rate limiting
0 export packets were dropped due to output drops

@Mario

@Mario

No.

It was basically asking about a characteristic of Authenticating, Authorization, Accounting, TACACS, and Radius. Even though I’ve never seen it that was an easy one to figure out. If you know the basics of each you can figure that one out in less than a minute.

@syc

its confusing question, ,

The “show ip flow export” command is used to display the “status and the statistics for NetFlow accounting data export”, including the main cache and all other enabled caches.

this show command used to display dropped packets,which mean the data thats going out of our device.

for me C make sens

@dzzz

There are a few confusing questions.

failing the exam I had 60 Q miss 10 points (my score: 78X)
Note all these questions are already posted on the site but false answers. People who wish to answer these questions should be on answers so as not to mislead others. Good luck to everyone.
labs :
– eigrp stub
– ospf eigrp redistribute
– OSPF Sim
DnD: 3 à 4 DnD jamais vu

QCM:
===
Which two tasks must you perform to configure a BGP peer group ?
a. Configure the soft-update value
b. Set the advertisement interval
c. Assign neighbours to the peer group
d. Activate each neighbour
e. Activate the default route
===
VPN support for IPv4 and IPv6 address families. Which command

enables a VRF that supports these requirements?
a. Router(config-vrf)#route-target 004:006
B. Router(config)#ip vrf CUSTOMER
C. Router(config)#vrf definition CUSTOMER
D. Router(config-vrf)#rd 004:006

===
Multicast application must be accessible between sites, but not

be accessible outside of the organization. Based on the scoping

requirements, the multicast group address for the application

will be allocated out of which range?
a. FF00::/16
b. FF08::/16
c. FF02::/16
d. FF0E::/16

===
Which type of Netflow information is displayed when the show ip

flow export command is executed?
A. top talkers
B. local status and statistics
C. sent status and statistics
D. export interface configurations

===
Which type of Netflow information is displayed when the show ip

flow export command is executed?
A. top talkers
B. local status and statistics
C. sent status and statistics
D. export interface configurations

===
What is EIGRP Summary Route Administrative Distance?
A. 90
B. 170
C. 5
D. 110

===
In which two ways can split horizon issues be overcome in a

Frame Relay network environment? (choose two.)
A. Configuring one physical serial interface with Frame Relay to

various remote sites.
B. Configure a loopback interface with Frame Relay to various

remote sites.
C. Configuring multiple subinterfaces on a single physical

interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon

===
Which three NTP operating modes must the trusted-Key command be

configured on for authentication to operate properly? (Choose

Three)
A. interface
B. client
C. peer
D. server
E. broadcast

===
Which two statements about Frame Relay LMI autosense are true on

a Router? (Choose two)
A. It requires the LMI type to be explicitly configured.
B. It operates on Frame Relay DTE interfaces.
C. It operates on Frame Relay DCE interfaces.
D. It operates when the line is up by the line protocol is down.
E. It requires the line protocol to be up

===
What is the default authentication in RIPv2 when authentication

is enabled
A. SHA1 authentication
B. Enable password authentication
C. Plain text authentication
D. MD5 authentication

===
Where must a network engineer configure the ip helper-address

command on a router
a. On the interface that will receive the broadcasts
b. On the DHCP configuration
c. the interface that is closed to the destination DHCP server
d. on the global configuration mode

===
Which two features ara added in MSCHAP Version 2
a. Backwards-compatibility with MSCHAP version 1
b. Using the MD5 hash for stronger security
c. Ability to change an expired password
d. using 3 way handshakes for authentication
e. mutual authentication between peers

===
Which command sequence can you enter on a router to configure

Unicast Reverse Path Forwarding in loose mode a. Interface

GigabitEthernet0/0 Ip verify unicast source reachable-via any
b. Interface GigabitEthernet0/0 Ip verify unicast source

reachable-via loose
c. Interface GigabitEthernet0/0 Ip verify unicast source

reachable-via all
d. Interface GigabitEthernet0/0 Ip verify unicast source

reachable-via rx

===
Refer to the exhibit. After configuring GRE between two routers

running OSPF that are connected to each other via a WAN link, a

network engineer notices that the two routers cannot establish

the GRE tunnel to begin the exchange of routing updates. What is

the reason for this?
A. Either a firewall between the two routers or an ACL on the

router is blocking IP protocol number 47. B. Either a firewall

between the two routers or an ACL on the router is blocking UDP

57.
C. Either a firewall between the two routers or an ACL on the

router is blocking TCP 47.
D. Either a firewall between the two routers or an ACL on the

router is blocking IP protocol number 57.

===
Which two tasks must you perform to configure a BGP peer group ?
a. Configure the soft-update value
b. Set the advertisement interval
c. Assign neighbours to the peer group
d. Activate each neighbour
e. Activate the default route

===
which of the following situations results in a routing loop ?
a. when you have a single point of redistribution
b. when you use NAT translation on the edge of your network
c. when you implement contiguous IP routing blocks
d. when you implement noncontiguous IP routing blocks
e. when you have multiple points of redistribution

===
which condition prevents the establishment of a DMPVN tunnel

between two spokes ?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.

===
Refer to the exhibit. After configuring GRE between two routers

running OSPF that are connected to each other via a WAN link, a

network engineer notices that the two routers cannot establish

the GRE tunnel to begin the exchange of routing updates. What is

the reason for this?
A. Either a firewall between the two routers or an ACL on the

router is blocking IP protocol number 47.
B. Either a firewall between the two routers or an ACL on the

router is blocking UDP 57.
C. Either a firewall between the two routers or an ACL on the

router is blocking TCP 47.
D. Either a firewall between the two routers or an ACL on the

router is blocking IP protocol number 57.

===
Other than a working EIGRP configuration, which option must be

the same on all routers for EIGRP authentication key role over

to work correctly?
A. SMTP
B. SNMP
C. Password
D. Time

===
Which SNMP verification command shows the encryption and

authentication protocols that are used in SNMPv3?
A. show snmp view
B. show snmp
C. show snmp user
D. show snmp group

===
What is EIGRP Summary Route Administrative Distance?
A. 90
B. 170
C. 5
D. 110

===
Refer to the following configuration command.
router(conttg)# ip nat inside source static tcp 172.16.10.8 8080

172.16.10.8 80
Which statement about the command is true?
A. Any packet that is received in the inside interface with a

source IP port address of 1 72.16.10.8:80 is translated to

172.16.10.8 8:80
B. Any packet that is received in the inside interface with a

source IP address of 172 16 10 8 is redirected to port 8080 or

port 80
C. The router accepts only a TCP connection from port 8080 and

port 80 on IP address 1 72 16 10 8
D. Any packet that is received in the inside interface with a

source IP port address of 172 1 6 10 8 8080 is translated to

172.16.10.8 80

===
Which two OSPF router types can perform summarize in an OSPF

network? (Choose two)
A. summary router
B. area border router
C. autonomous system boundary router
D. internal router
E. backbone router

===
Configuring one physical serial interface with Frame Relay to

various remote sites.
B. Configure a loopback interface with Frame Relay to various

remote sites.
C. Configuring multiple subinterfaces on a single physical

interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon

===

During which DMVPN phase is spoke-to-spoke communication

enabled?
A. Phase 1
B. Phase 6
C. Phase 5
D. Phase 2
E. Phase 4

===
Which three benefits does the Cisco Easy Virtual Network provide to an enterprise network? (Choose three.)
A. simplified Layer 3 network virtualization
B. improved shared services support
C. enhanced management, troubleshooting, and usability
D. reduced configuration and deployment time for dot1q trunking
E. increased network performance and throughput
F. decreased BGP neighbor configurations

===
Which three NTP operating modes must the trusted-Key command be configured on for authentication to operate properly? (Choose Three)
A. interface
B. client
C. peer
D. server
E. broadcast

===
Which two statements about Frame Relay LMI autosense are true on a Router? (Choose two)
A. It requires the LMI type to be explicitly configured.
B. It operates on Frame Relay DTE interfaces.
C. It operates on Frame Relay DCE interfaces.
D. It operates when the line is up by the line protocol is down.
E. It requires the line protocol to be up.

===
Which type of Netflow information is displayed when the show ip flow export command is executed?
A. local status and statistics
B. export interface configurations
C. sent status and statistics
D. top talkers

===

Which access list entry checks for an ACK within a packet header?
A. access-list 49 permit ip any any eq 21 tcp-ack
B. access-list 49 permit tcp any any eq 21 tcp-ack
C. access-list 149 permit tcp any any eq 21 established
D. access-list 49 permit tcp any any eq 21 established

===
Considering the IPv6 address independence requirements, which process do you avoid when you use NPTv6 for translation?
A. rewriting of higher layer information
B. checksum verification
C. ipv6 duplication and conservation
D. IPSEC AH header modification

===

RIPng question. Cannot receive updates. Why?
A. Firewall Port block UDP 520
B. Firewall Port block TCP 520
C. Firewall Port block UDP 521
D. Firewall Port block TCP 521

===

What is the default authentication in RIPv2 when authentication is enabled
A. SHA1 authentication
B. Enable password authentication
C. Plain text authentication
D. MD5 authentication

===
Which two tasks does a DHCP relay agent perform? (Choose two)
A. It forwards DHCPHELLO and DHCPREQUEST messages to the DHCP server
B. It forwards DCHPREQUEST and DHCPACK messages to the DHCP server
C. It forwards DHCPOFFER and DHCPCOMPLETE messages to the DHCP server
D. It forwards DHCPDISCOVER and DHCPREQUEST messages to the DHCP server
E. It forwards DHCPOFFER and DHCPACK messages to the DCHP server

===
Where must a network engineer configure the ip helper-address command on a router
a. On the interface that will receive the broadcasts
b. On the DHCP configuration
c. the interface that is closed to the destination DHCP server
d. on the global configuration mode

@mfa how you do on the labs and d & d questions? the labs take up the majority of the points. The questions above with answers should have been right. I guess you will know based on the percentage you got on your test result print out. I suggest going over that and keep in mind that if you memorized the questions and thought that the answer was B and the answer on the test was moved to D, that would play a role. That is why its important to go over material and understand what you are reading on the test.

@examnextweek for vrf question see below:

This example configures an IPv4 VRF on an Ethernet subinterface:
Router# configure terminal
Router(config)# ip routing
Router(config)# vrf definition vrf1
Router(config-vrf)# rd 100:1
Router(config-vrf)# address family ipv4
Router(config-vrf)# route-target export 100:1
Router(config-vrf-af)# exit-address-family
Router(config-vrf)# interface Fa0/0.1
Router(config-subif)# vrf forwarding vrf1
Router(config-subif)# end

This example configures an IPv6 VRF on a VLAN:
Router(config)# ipv6 routing
Router(config)# vrf definition red
Router(config-vrf)# rd 100:1
Router(config-vrf)# address family ipv6
Router(config-vrf-af)# route-target both 200:1
Router(config-vrf-af)# exit-address-family
Router(config-vrf)# interface vlan vlan1
Router(config-if)# vrf forwarding red
Router(config-if)# ipv6 address 5000::72B/64

So, you have to create a definition before proceeding to the address families for both ipv4 & ipv6, then router target etc. Answer C is correct

Guys,
we need now correct answers of the above questions. If you are sure please answer them. Most of the above questions are already available in Kikavich dump.

Question 2 regarding the multicast address is to confirm the answer as B

ffx8::/16 239.192.0.0/14 Organization-local Restricted to networks used by the organization administering the local network. (For example, these addresses might be used over VPNs; when packets for this group are routed over the public internet (where these addresses are not valid), they would have to be encapsulated in some other protocol.)

Good work Mario

Question 1 for BGP peer read site below for sample config:

http://www.getnetworking.net/bgp/how-to-configure-bgp-peer-group

Netflow export output question:

The following is sample output from the show ip flow export command:

Router# show ip flow export

Flow export v5 is enabled for main cache
Exporting flows to 10.51.12.4 (9991) 10.1.97.50 (9111)
Exporting using source IP address 10.1.97.17
Version 5 flow records
11 flows exported in 8 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
0 export packets were dropped enqueuing for the RP
0 export packets were dropped due to IPC rate limiting
0 export packets were dropped due to output drops

The rest of the questions are pretty much easy and self explanatory. There is more info on CCIE material to answer all of these confusing questions Cisco throws on the NP track. I’m honestly considering bypassing NP r/s all together and go straight to IE written if I don’t pass this test hehe. But, we’ll see…

@madmartigan Thx

@ Anonymous I got 60 q. No i did not get that.
One thing that I have noticed in the exam and it is not mention here, is that in ospf sim that i got.
I had also to declare serial0/0 interface of Amani to area 0. Be carefull of that.
Try and ping both ways Portland and Lynaic, because one way may be Ok, but on the other way not.

I also got a question for RIPv2 how long a static route remains if the point to point interface is down.
a 30s
b 60s
c 180s
d 240s

@Pass thx for the info much appreciated.

answer to your question is below:

RIPv2 Default Timers:

Update: 30 sec
Invalid: 180 sec
Hold Down: 180 sec
Flush: 240 sec

let us know what else you encountered in your test. thx again

Kikavich.. Q17

regarding the query message sent from router HQ-R2 to reach 12.12.12.12/32?

Does anyone understand the Answer?

also for anyone who took. the exam.. Does Write or Copy run start work on the lab?
my exam next. Sunday.. wish me luck

@asma
eigrp stub router dosent pass query messages or even send them to its neighbor.

wrote today & passed need to study all 477Q , kikavich, dexter, pg 148-152 from digitaltut

need to know all sim by heart at least 20 new Q today not seen here use best judgement

most Q from pg 148-152 but not enough 2 pass alone

@Pass93x congratulations, do you happen to remember what the newer 20 questions were? I am taking mine tomorrow. thx

CORRECTED:
===
Which two tasks must you perform to configure a BGP peer group ?
a. Configure the soft-update value
b. Set the advertisement interval
c. Assign neighbours to the peer group
d. Activate each neighbour
e. Activate the default route

CD
===
VPN support for IPv4 and IPv6 address families. Which command

enables a VRF that supports these requirements?
a. Router(config-vrf)#route-target 004:006
B. Router(config)#ip vrf CUSTOMER
C. Router(config)#vrf definition CUSTOMER
D. Router(config-vrf)#rd 004:006

C
===
Multicast application must be accessible between sites, but not

be accessible outside of the organization. Based on the scoping

requirements, the multicast group address for the application

will be allocated out of which range?
a. FF00::/16
b. FF08::/16
c. FF02::/16
d. FF0E::/16

B
===
Which type of Netflow information is displayed when the show ip flow export command is executed?
A. top talkers
B. local status and statistics
C. sent status and statistics
D. export interface configurations

B
===
What is EIGRP Summary Route Administrative Distance?
A. 90
B. 170
C. 5
D. 110

C
===
In which two ways can split horizon issues be overcome in a

Frame Relay network environment? (choose two.)
A. Configuring one physical serial interface with Frame Relay to

various remote sites.
B. Configure a loopback interface with Frame Relay to various

remote sites.
C. Configuring multiple subinterfaces on a single physical

interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon

CE
===
Which three NTP operating modes must the trusted-Key command be

configured on for authentication to operate properly? (Choose

Three)
A. interface
B. client
C. peer
D. server
E. broadcast

BCE
===
Which two statements about Frame Relay LMI autosense are true on

a Router? (Choose two)
A. It requires the LMI type to be explicitly configured.
B. It operates on Frame Relay DTE interfaces.
C. It operates on Frame Relay DCE interfaces.
D. It operates when the line is up by the line protocol is down.
E. It requires the line protocol to be up

BD
===
What is the default authentication in RIPv2 when authentication

is enabled
A. SHA1 authentication
B. Enable password authentication
C. Plain text authentication
D. MD5 authentication

C
===
Where must a network engineer configure the ip helper-address command on a router
a. On the interface that will receive the broadcasts
b. On the DHCP configuration
c. the interface that is closed to the destination DHCP server
d. on the global configuration mode

A
===
Which two features ara added in MSCHAP Version 2
a. Backwards-compatibility with MSCHAP version 1
b. Using the MD5 hash for stronger security
c. Ability to change an expired password
d. using 3 way handshakes for authentication
e. mutual authentication between peers

CE
===
Which command sequence can you enter on a router to configure

Unicast Reverse Path Forwarding in loose mode

a. Interface

GigabitEthernet0/0 Ip verify unicast source reachable-via any
b. Interface GigabitEthernet0/0 Ip verify unicast source

reachable-via loose
c. Interface GigabitEthernet0/0 Ip verify unicast source

reachable-via all
d. Interface GigabitEthernet0/0 Ip verify unicast source

reachable-via rx

A

===
Refer to the exhibit. After configuring GRE between two routers

running OSPF that are connected to each other via a WAN link, a

network engineer notices that the two routers cannot establish

the GRE tunnel to begin the exchange of routing updates. What is

the reason for this?
A. Either a firewall between the two routers or an ACL on the

router is blocking IP protocol number 47. B. Either a firewall

between the two routers or an ACL on the router is blocking UDP

57.
C. Either a firewall between the two routers or an ACL on the

router is blocking TCP 47.
D. Either a firewall between the two routers or an ACL on the

router is blocking IP protocol number 57.

A
===
Which two tasks must you perform to configure a BGP peer group ?
a. Configure the soft-update value
b. Set the advertisement interval
c. Assign neighbours to the peer group
d. Activate each neighbour
e. Activate the default route

CD
===
which of the following situations results in a routing loop ?
a. when you have a single point of redistribution
b. when you use NAT translation on the edge of your network
c. when you implement contiguous IP routing blocks
d. when you implement noncontiguous IP routing blocks
e. when you have multiple points of redistribution

E
===
which condition prevents the establishment of a DMPVN tunnel

between two spokes ?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.

C
===
Other than a working EIGRP configuration, which option must be

the same on all routers for EIGRP authentication key role over

to work correctly?
A. SMTP
B. SNMP
C. Password
D. Time

D
===
Which SNMP verification command shows the encryption and

authentication protocols that are used in SNMPv3?
A. show snmp view
B. show snmp
C. show snmp user
D. show snmp group

C
===

Refer to the following configuration command.
router(conttg)# ip nat inside source static tcp 172.16.10.8 8080

172.16.10.8 80
Which statement about the command is true?
A. Any packet that is received in the inside interface with a

source IP port address of 1 72.16.10.8:80 is translated to

172.16.10.8 8:80
B. Any packet that is received in the inside interface with a

source IP address of 172 16 10 8 is redirected to port 8080 or

port 80
C. The router accepts only a TCP connection from port 8080 and

port 80 on IP address 1 72 16 10 8
D. Any packet that is received in the inside interface with a

source IP port address of 172 1 6 10 8 8080 is translated to

172.16.10.8 80

D
===
Which two OSPF router types can perform summarize in an OSPF

network? (Choose two)
A. summary router
B. area border router
C. autonomous system boundary router
D. internal router
E. backbone router

BC
===
Configuring one physical serial interface with Frame Relay to

various remote sites.
B. Configure a loopback interface with Frame Relay to various

remote sites.
C. Configuring multiple subinterfaces on a single physical

interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon

CE
===

During which DMVPN phase is spoke-to-spoke communication

enabled?
A. Phase 1
B. Phase 6
C. Phase 5
D. Phase 2
E. Phase 4

D
===
Which three benefits does the Cisco Easy Virtual Network provide to an enterprise network? (Choose three.)
A. simplified Layer 3 network virtualization
B. improved shared services support
C. enhanced management, troubleshooting, and usability
D. reduced configuration and deployment time for dot1q trunking
E. increased network performance and throughput
F. decreased BGP neighbor configurations

ABC
===

Which type of Netflow information is displayed when the show ip flow export command is executed?
A. local status and statistics
B. export interface configurations
C. sent status and statistics
D. top talkers

A
===

Which access list entry checks for an ACK within a packet header?
A. access-list 49 permit ip any any eq 21 tcp-ack
B. access-list 49 permit tcp any any eq 21 tcp-ack
C. access-list 149 permit tcp any any eq 21 established
D. access-list 49 permit tcp any any eq 21 established

C
===
Considering the IPv6 address independence requirements, which process do you avoid when you use NPTv6 for translation?
A. rewriting of higher layer information
B. checksum verification
C. ipv6 duplication and conservation
D. IPSEC AH header modification

A
===

RIPng question. Cannot receive updates. Why?
A. Firewall Port block UDP 520
B. Firewall Port block TCP 520
C. Firewall Port block UDP 521
D. Firewall Port block TCP 521

C
===

What is the default authentication in RIPv2 when authentication is enabled
A. SHA1 authentication
B. Enable password authentication
C. Plain text authentication
D. MD5 authentication

C
===
Which two tasks does a DHCP relay agent perform? (Choose two)
A. It forwards DHCPHELLO and DHCPREQUEST messages to the DHCP server
B. It forwards DCHPREQUEST and DHCPACK messages to the DHCP server
C. It forwards DHCPOFFER and DHCPCOMPLETE messages to the DHCP server
D. It forwards DHCPDISCOVER and DHCPREQUEST messages to the DHCP server
E. It forwards DHCPOFFER and DHCPACK messages to the DCHP server

DE
===

@Mario 20Q similar to pg 148-152 but reworded diffrent wrong choice

try copy running-config startup-config on every sim. work on one of them only 2day

@Pass93X congrats. Please did you get some or most of the questions from the above dumps you mentioned? That is what i am studying with for now including the new questions posted here. What was your DND questions like. Thank you

Downlode all file from PG 143 links study all DnD from kikavich exakt same one on exam. Lab are same but different IP used.

Please guys I see posts on Kikavich D&D; how do I get it? Can I find it here? Thank you!

hi just wondering why “copy running startup” is not working anymore. It does affect exam results?

@ccnp fpi it work for some but not other. if no work u still get full point

DnD in below w. 477Q , Kikavich corrected

https:// drive . google.com/drive/folders/1UyTdhAq3k2qn-pOwZ41Bpv-FmA7rmKgu

Kikavich
https:// drive . google.com/drive/folders/1UyTdhAq3k2qn-pOwZ41Bpv-FmA7rmKgu
All in one
https:// www . dropbox.com/s/oqd7dept3tdg1vy/all%20in%20one.vce?dl=0
jazzy + prince
https:// drive . google.com/drive/folders/1zPsB1wW8QtA8ThFgI_qKBhSXr8reOJKx
https:// drive . google.com/drive/folders/1fKVLXnpMrjLgxMna8wkazos1YV09XzVZ

Just remove the spaces

GOOD LUCK

@Pass93X: Thank you.