Share your ROUTE v2.0 Experience

@Iraqi Guy- I used the info from this site and passed the exam. I was lucky that I got hold of the Passleader and the Chinese Dumb as well. So the digitaltut dumb is still valid – what you need to do is to do research on Cisco website . You must not be afraid of having a different answer from what Passleader/ DigitalTut says- this is exactly what I did.
With regard to labs – you need to finish the questions e.g. in the pbr LAB , DO generate traffic- also not that you need to visit R1 and issue the command.
On the Redist lab you need to issue the correct distance values ,to the correct routers. Also ping and check traffic – it is part of the requirements.

hey folks,
on the EIGRP OSPF redistribution lab, we care only about the path from R1 to R4 to be optimized if needed, right? We dont worry about the return path R4>R1, right?

I successfully passed the exam today with 913 . There were 10-12 new MCQ questions from digitaltut. 2 new DD questions. I studied digitaltut March updated version only. Digitaltut is still good enough to pass. But you should understand the concepts well.

@scolari
I have about 20 questions in which I am not sure about the answers. Can you help? The more research I do the more confused I get. I am tired playing this cat and mouse game with Cisco.

@Raveena
Can you remember the new Drag and Drop questions?

passed today with 8xx, like 10 new questions, i remember something about:
– SNMP inform v/s trap
– Types of uRPF
– ip nat tcp [ip adddress] 8080 [ip address] 80, what happen in that command? how NAT translate that?
– Lots of IP SLA Questions.
– Same lab
– New DD about AAA but it almost the same
– Like two new EVN questions
– SNMP new questions about how works

This site is enough but don´t trust in the questions, learn about the type but a lot of study. Regards

Passed today 814. I failed last week with 769 and it was because I didn’t study the “updated questions” digitaltut had. Definitely worth the 1 month subscription to be the premium never for those extra questions.

I also studied 2 dumps I got from an earlier post on mediafire. It was Dexter and Last Dump. Go back about 2 or 3 pages and if I remember correctly it was posted by someone named Khalil.

Sims I got were OSPF-EIGRP redistribute (case #2), PBR, and OSPF Evaluation. Digitaltut sims were spot on.
D&D: COPP/MPP, GRE nomenclature, AAA nomenclature, IPV6 traffic filtering, Authenticaion/Authorization/Accounting. All of which can be found on digitaltut or those PDFs I referenced earlier.

**The test last week had a D&D on how to configure a point to point frame relay. If you have the CCNA CBT nuggets he explains it perfectly. Good luck.

congrats on those who passed recently!
anything specific about the labs, is everything as described here in digitaltut, any issues,bugs etc?

Dear Friends who passed CCNP Route recently please share the Latest Dumps with me at ghulamrasoul@outlook(.)com

still trying to peddle the free exam you got for a profit

@Camboxx

How recent are the updated questions? Can post any new questions?

Passed the exam yesterday, 913/1000.
I used the premium section here and the material covered 90% of what came up.
Labs were PBR, Redis(No2) and OSPF eval – Same as the ones on here.
Plenty of layer 2 questions, some very random questions on FrameRelay.
Drag N Drop – DMVPN, Radius/Tacas, MPP/CoPP, Question 10 from the dragNdop section and uRPF.

If you go through this site you should find everything you need.

@ Bootstrapp88

Congrats on passing the exam.

Did you study the old questions on this site as well?

@Rafael quiroz do you still have the pass leader dump?

I share with you the joy of CCNP and recommend a trusted Cisco exam materials website. My 300-206 is the exam that passed their exam materials. The exam questions are very close to my materials, so I am very successful. Passed the exam, then my CCIE written test will use their materials, customer service also provided me with coupons, very good
w
ww.cciedu
mps.xyz/ccie_du
mps.php?utm_sou
rce=lt0415

Hi guys,
passed the exam few days ago,
I learned a lot for this exam , go with the assumption that there will be some new questions,
for me it was 5 or 6 questions that i did not find on Most popular Question section on this site,
( 2 question about timestamps something & 1 question about NETFLOW)
thanks to all honest guys who have been on this page and have given us some sincere comments , this page is great ,
EIGRP -> OSPF lab, PBR lab, OSPF evoluation sim,
DRAG & DROP – ipsec,mss,keepalive & NAT 64,NPTv6 ….drag & drop that are on this site

Hi guys,
Can anyone please share the CCNP dumps for ROUTE, SWITCH and TSHOOT.
Thanks in advance.
varunkv1094 (at) gmail (dot) com .

Hello krejzi kure, thanks for this update. I have one question to you or anyone who pass CCNP 300-101 recently – for OSPF Evaluation Sim Lab, did ‘show ip ospf database’ command work? I saw few comments that it didn’t work on an exam so I am quite confused which one we should use instead. Thanks!

@ Peter , everything works for me, it was no problem.

@krejzi kure, great thanks!

@Aussie Mate
I focused mostly on the most popular questions, the composite questions and New updated part 5.
I went through some of the older questions too but 90% from those sections above.

Hello People, please i need the most recent dump

Hello everyone!
What is the difference between Redistribution labs (type 1 and type 2)?
Thank you.

Can any one share me latest Pass Leader 300-101 dumps (769q) or Emma dumps. I will be very thankful for this as i need to appear CCNP route exam this month below is my email
jotalopz at gmail dot com

@Bootstrap88
I’ve been studying the most popular / New updated part 5 questions. I’ve not looked at the composite quiz questions, are most of these questions duplicates of what’s covered in most popular?

Are you able to elaborate on the Frame Relay questions?

Thank you

Failed today 779/1000. Only one more correct answer to pass.

Lab Sims: PBR, EIGRP – OSPF redistribution & OSPF Eval.

Encountered 12 new questions that is not in the MPQ and NUQ. Please post the new questions. I want to retake the exam soon. Make sure that you study well as the dumps only cover 80-90% of the exam.

@Anonymous

Like you, I scored 779/1000 I feel like I got ambush with about 10 to 12 questions I had not seen on any dump or digitaltut. The key to passing the test is knowing the new questions. If you can remember the any questions let me know. Also, the answers for some questions are wrong on this site and other dumps.

Can anybody please tell me where can I find Passleader and chinese dumps everyone’s been talking about ?? I didnt see those in my premium membership.
Thanks in advance

Be careful!!!!!!! guys exams has dramatically changed for MCQs. Sims and labs are the same my advise we stuck in typhat till further notice as many new questions on layer 2 and AAA.

DND still the same from old dumps dexter or 769q, mostly issued dumps are fake and costly. Best of luck to everyone

anybody who passed yesterday or today? what did you have?
I already have it scheduled in the next few days, no way back : )

btw, how we generate HTTP traffic to test the PBR lab?

@ Kopi

After you have finished your configuration , you need to check the RHS where there is a Test Work station icon- just click there- then you will generate the traffic. Also you need to go back to R1 and state also sh route-map command. to see whether it was applied correctly on Fa0/1 ( if it is Fa0/1 on the exam )

Hello – can anyone who took an exam recently also confirm that plenty of question were changed? If so, are there any most suitable dumps? I am about to be a premium membership and just wondering if that is worth

@Scolari, thanks
yeah I will be watching on the “show route-map” for counters incrementing, thats clear
I wasn’t sure how to generate the HTTP traffic from the test work station, if “ping [IP] -p 80” will work or not, you know those labs are very bogus and not all options exist all the time

another question that I have- I red somewhere and I agree that is a lot better to “set next-hop interface XXX” instead of an IP, cause if we set the next hop as an IP its not 100% sure that we will route via ISP1, if the link to ISP1 fail our router may try to reach the following IP via ISP2, ISP1 and ISP2 are in same AS … I think thats on purpose …

I hope I explained well :) if you dont mind, you can reach me on icobescu . alexandra @ yahoo . com

have a nice day

Stable and effective CCNP exam materials, the topic comes from the real exam

#3 – A
#4 – C
#5 – under (config-rtr) level / RIPng router configuration level, however you want to call it

@Kopi,

Which two statements about EVN are true? (Choose two)
A. It supports IPv6 traffic.
B. It can support up to 16 VNs.
C. It uses redistribution to share routes between VNs.
D. It supports SSM only.
E. A configuration can be based on an existing VRF configuration

What is the correct answers? I know 100% – E is one of them. but the second one is more tricky,
C-? or A ?
it uses route-replication as well as route-redistribution.
Any idea?

A – is true I think, cause it supports IPv6 traffic but for vnet global only, so it supports… 50% true
B – not true, supports 32VNs
C – uses route replication and route redistribution .. 50% trulish ..
D – not true, SM and SSM
E – clearly true …

I am between A and C as you say, maybe I will go for … C

Cisco is a bitch !

@Kopi,

Thanks for the promptness!
There are other ambiguous questions. Lemme come back to you with good ones which will make us to rethink.

@Saji, sure
btw,do you know what are those soft messages when it comes about BGP groups, I have no idea what those soft messages are … never heard about them, didnt find material either .. nothing

can some please send the most up to date VCE for the 300-101 to my email?

{email not allowed}

is it that we can not use the “show ip ospf database” for the OSPF Sim?
how we check the age of LSA then?

Hi community!!
what is the diference between digitaltut premiun and normal?

@Kopi,

There are talking about BGP peer group & when you define the peer group, you may need to apply those setting (out bound polices) to those peer groups. so to get effect new peer group you need to reset the neighbors via Hard reset or soft reset.
Hard reset will bring the TCP down & need to form neighborship.
clear ip bgp * 10.1.1.1
clear ip bgp peer-group ISP-peer-group-2
Soft reset will not bring the neighbor down but it will apply the filters, polices & re-send the updates.
clear ip bgp 10.1.1.1 soft in
clear ip bgp peer-group ISP-peer-group-2 soft out

when you do a soft reset for the peer group, you will see those policies/ACL/filters are being applied to those peer-group via DEBUG IP BGP UPDTES OUT command
I hope this will shed light on this BGP peer group soft messages out put

Still we don’t know the exact question though. I hope we can tackle this question

3-When does a Cisco router send an ICMP redirect?(take care here ingress and egress interface are different not as the dump)
A. when the source and destination in the same subnet
B. when the packet is source-routed
C. when the packet`s destination has load-balanced entries in the route table
D. when the packet`s ingress and egress interface are different

Answer: A

4-order the OSPF acording to path type selection
A-intra area ,inter area , ,NSSA Type 1 and NSSA Type 2 External Type 1 ,External Type 2
B-inter area ,intra area , External Type 1 ,External Type 2 ,NSSA Type 1 and NSSA Type 2
C-intra area ,inter area , ,External Type 1 ,External Type 2 NSSA Type 1 and NSSA Type 2
D-inter area ,intra area , NSSA Type 1 and NSSA Type 2 External Type 1 ,External Type 2

Answer: C

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated but the client‘s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication ms-chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2 callin
D. ppp authentication chap callin
E. ppp authentication ms-chap-v2

C or E?

@stan . I believe C , since the question is referring to a one way authentication.

Passed the exam today, 814/1000.
I used the premium section. Review Composite Quizzes some questions from there.
Labs were PBR, Redis(No2) and OSPF eval – Same as the ones on here.
Some questions that are new from page 303 @M.Shahin
Plenty of layer 2 questions, some very random questions on FrameRelay.
Drag N Drop – frame-relay, NAT64, CoPP/MMP, AAA
thank you very much to everything in this forum of @digitaltut

Cisco (CCNA CCNP CCIE) learning materials, Cisco Learning Guide, the latest materials in 2019, are now very stable and are certified for use after use.