Question 1

Refer to the exhibit.

An engineer applies this configuration to R1:

ip nat inside source static 192.168.10.17 192.168.27.42

Which command set should be added to complete the configuration?

Question 2

Which characteristic applies to a traditional WAN solution but not to a Cisco SD-WAN solution?

Question 3

Which configuration saves the running configuration to the startup configuration and generates a “saving configuration automatically” log message when a syslog message containing “SYS-5-CONFIG_I” is received?

event manager applet saveconfig 
 event syslog pattern 'SYS-5-CONFIG_I' period 1 
 event track 1 
 action 1.0 cli command 'write mem' 
 action 2.0 syslog msg 'saving configuration automatically'

event manager applet save_config
 action 1.0 string match 'SYS-5-CONFIG_I' save_config
 action 2.0 cli command 'write mem'
 action 3.0 syslog msg 'saving configuration automatically'

event manager applet save_config
 event syslog pattern 'SYS-5-CONFIG_I' period 1
 action 1.0 cli command 'end'
 action 2.0 cli command 'write mem
 action 3.0 syslog msg 'saving configuration automatically'

event manager applet save_config
 event syslog pattern 'SYS-5-CONFIG_I' period 1
 action 1.0 cli command 'write mem'
 action 2.0 syslog msg 'saving configuration automatically'

Question 4

A server running Linux is providing support for virtual machines along with DNS and DHCP services for a small business. Which technology does this represent?

Question 5

Refer to the exhibit.

What is the value of the variable list after the code is run?

Question 6

Refer to the exhibit.

Which configuration ensures that PC-1 internet traffic uses the link between CoreSW-1 and CoreSW-2 when both switches are operational?

A.CoreSW-2(config)# interface vlan 10
CoreSW-2(config-if)# standby 10 priority 100

B.CoreSW-1(config)# interface vlan 10
CoreSW-1(config-if)# standby 10 priority 90

C.CoreSW-2(config)# interface vlan 10
CoreSW-2(config-if)# standby 10 priority 110

D.CoreSW-1(config)# interface vlan 10
CoreSW-1(config-if)# standby 10 priority 100

Question 7

Which technology provides an overlay fabric to connect remote locations utilizing commodity data paths and improves network performance, boosts security and reduces costs?

Question 8

Refer to the exhibit. Which privilege level is assigned to VTY users?

R1# sh run | begin line con 
line con 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
 stopbits 1
line aux 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
 stopbits 1
line vty 0 4
 password 7 03384737389E938
 login
line vty 5 15
 password 7 03384737389E938
 login
!
end

R1#sh run | include aaa | enable
no aaa new-model
R1#

Question 10

What is the role of SD-WAN Controller in a Cisco SD-WAN environment?

Question 11

Refer to the exhibit.

An engineer must configure router R1 to allow only NETCONF connections from the management VLAN. Which command completes this configuration?

Question 12

Which two solutions can be used to back up the Cisco Catalyst Center Assurance database? (Choose two.)

Question 13

When implementing NTP, which two security features are available ? (Choose two)

Question 14

What is one difference between Saltstack and Ansible?

Question 15

Refer to the exhibit.

Router#sh run | b vty

line vty 0 4
 session-timeout 30
 exec-timeout 120 0
 session-limit 30
 login local
line vty 5 15
 session-timeout 30
 exec-timeout 30 0
 session-limit 30
 login local

Which configuration terminates all idle EXEC sessions after 600 seconds to comply with the security policy?

Question 16

Which devices does Cisco Catalyst Center (formerly DNA Center) configure when deploying an IP-based access control policy?

Question 17

Which Python library is used to work with YANG data models via NETCONF?