Share your ROUTE v2.0 Experience

@JOCA Q761 answer is correct: “Show tcp brief numeric” as it shows here:

Router# show tcp brief numeric

TCB Local Address Foreign Address (state)
6523A4FC 10.1.25.3.11000 10.1.25.3.23 ESTAB
65239A84 10.1.25.3.23 10.1.25.3.11000 ESTAB
653FCBBC *.1723 *.* LISTEN

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp/command/iap-cr-book/iap-s3.html#wp4294670608 section show tcp brief

Hi everybody

Passed today with 889 Point.

Labs: EIGRP stub, OSPF, Redistribution EIGRP-OSPF.

Dumps shared by nneettwwoorrkkiinngg 2.1 are very much valid, I am appreciated and thank you. All questions, drag and drop in dump. However, some question I answer like you recommend but it’s wrong.
Any way, thank you for your sharing.

@writingtuesday

can you please share with me SPOTO dump?
h a g a r dot KORIEM @ gmail dot com

Hello all,

any help with Q.169

Which two reasons for IP SLA tracking failure are likely true? (Choose Two)
A.The source-interface is configured incorrectly.
B.The destination must be 172.30.30.2 for icmp-echo.
C.A route back to the RI LAN network is missing in R2.
D.The default route has wrong next hop IP address.
E.The threshold value is wrong

Correct Answer: AC

Why A is correct answer and not E?

Spoto is in page 195.

@Lars thank you :)

Hi i did not understand this question, why it is not eigrp (and variance feature)? i saw a topic but i did not get it.

QUESTION 701
Which routing protocol routers traffic throught the best path and seccond best path at the same time?
A. EIGRP
B. BGP
C. OSPF
D. RIP

@WritingTuesday what spoto? the 146Q? do you have the VCE?
Guys, i forgot the original link but i upload the PDF. https://drive.google.com/open?id=10neN-GaxhYxrVQBxXOYBBqsVVqwciz0n

The question is Spoto enough to pass the exam?

Yes that one Joanalesan

@writingtuesday

Please share the SPOTO dump with me

37.alaa gmail com

Hi @WritingTuesday,
Please paste for me the URL for the SPOTO dump.

Guys no one will ever email you anything, it’s extra admin… @Alaa & STIG it’s literally above y’all comments. Read up, the stuff is posted everywhere on previous pages.. Like i said, netttwwoorrk is also valid enough. Study what you have it’s still good v1.1 or 2.1 or spoto and the premium om the ‘site.

@Bruce Cos
Congratulations I am happy to hear :)

Hi All,
140 or 200 Questions not enough pass the exam.
Please be careful.

plz share spoto and any other latest dumps.
kaleemkhawarksa at gmail.com

@acme, I noticed it too! I think v2.1 is not fully corrected yet.. Hi @nneettwwoorrkkiinngg, hoping you could do something about this. Thank you!

@Imssr09
Got it, thank you very much.

@ writingtuesday did you study all of the question on 2.1 or which questions did you study?

@nneettwwrrookkiinngg bro the 2.1 version is already corrected? cause many ppl share his corrections here…. btw, i think version 1.2 is enough to pass the exam but i don’t know why the drag and drop questions have diferent answers compared with SPOTO.

Anyone who has passed, did you use the digital tut answer for the redistribute lab? Or, did you lower the bw to 10,000 and delay to 10?

Hey nneettwwoorrkkiinngg,

Some concerns about v2.1:

Q436

Option A should be:
An IPv4 EIGRP router ID is required, not IPv6.
————-
Q93

Option C should read:
authpriv, and not only priv.
—————
Q 415

Need Some help with this…
FIB is Forward Information Base, I would expect that this is the only table that holds Forward Information.
Adjance keep track of the MAC of the Next-Hops on the FIB.

Together they work for making CEF work, but it says here that both FIB and Ajdanc. Tab. hold information on Forwarding ?

———–
Q661

Wrong answer is set…
It is saying that TTL prevent CAM table overload, but a packet decrementing TTL doesn’t add another mac on a CAM.
It is to prevent Routing Loops.

—–
Q717
The correct answer doesn’t make sense…
IF it was a multipoint link, and if the Option would state “ISN’T/IS NOT” would.

—–
Q646
The answers are wrong…
Right Order is:

Serial 0
encap frame-relay
int serial0.1
frame-relay interface-dlcl 100

It doesn’t even make any sense the answer exposed.

—-
Q596
It says that will chose the New IP when the OSPF process reboot, but with the information on the question we don’t know if the actual RID is from a physical or loopback interface…
It leads to errors, could you put (Not a loopback) on the 172.18.1.1 question ??

—–
Q459

The answer is Wrong.
If the source is from the loopback it would never be ebgp-multihop 1, it would be at minimum 2.

Or it’s a update source missing, or the answer should be ebgp-multihop 2.

———–
Q671
The answer is Bandwidth Delay Product.

MSS is the most data it can transverse a single interface.

As per definition: https://en.wikipedia.org/wiki/Bandwidth-delay_product
In data communications, bandwidth-delay product is the product of a data link’s capacity (in bits per second) and its round-trip delay time (in seconds).[1][2] The result, an amount of data measured in bits (or bytes), is equivalent to the maximum amount of data on the network circuit at any given time, i.e., data that has been transmitted but not yet acknowledged.

—

Q665

The variance should be 3:
FD = 150
Metric for R1->R3->R2->192.168.10.0/24 is 450
So to allow that you need a Variance of 3, FD*3 = 450>=Metric_throughR3(450).

—

So many talking about dumps elsewhere. Is Digitaltut info legit?

Quick question, is the August questions enough? Or should I go ahead and study every section? Thanks guys!

@testing soon
If you really study things, the labs are easy, and you just need to learn some tricky questions…
They dive deep on some topics that on the oficial cert guides you pass in 1 paragraph…

So I would take the dump from nneettwwoorrkkiinngg, you can find on the comments, and study any topic/question you are in doubt…

Remember this is not a professional work, and he is not paid for that, so you can’t demand it to be 100% flawless…

GL :)

My will be this week.

Dears could anybody let me know that is 765q of networking v2.1 is updated dumps ???? if this is not the updated please share me the updated to abbas.quraishi789@ gmail.com

@DNK Regarding Q665 – I think it will never perform unequal-cost load balance, because in this topology we have an AD=150 and a FD=150, so it will never take the path R1>R2>R3 even seting the variance 3 or more.
AD should be less than FD.

Which statement about stateless and stateful IPv6 auto configuration are true?
A. Both stateless and stateful autoconfiguration require additional setup
B. Stateless autoconfiguration requires no additional setup, whereas stateful autoconfiguration requires additional setup
C. Stateless autoconfiguration requires additional setup, whereas stateful autoconfiguration requires no additional setup
D. Both stateless and stateful autoconfiguration require no additional setup
Guys is it D correct here?PLZ ANSWER xx

Q 166 -In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received by all EIGRP routers within the Frame Relay network?

A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use sub interfaces.
E. Disable EIGRP auto summary.

ANS: A &C

Please confirm

@Amy I just rewatched the pluralsight course on this which states. This is a bit of a tricky question it seems b/c:
Stateful Nat-64 the Router in between hosts has static 1:1 translation configured btw IPv4/IPv6 (but no configuration needed on the HOSTs).
Stateless NAT-64 on the other hand, instead of having static mapping configured on the Router, the IPv6 HOST has an IPv4 address embedded in hexadecimal format.
I believe the answer is B, since it’s the route exam and they’re likely asking about the config on the routers instead of the configuration on the hosts.

@goal_bound thank you for explaining, i understand now xx

@amy – QUESTION 379 i would say D , both simplify on the on the client side. but is is tricky
https://community.cisco.com/t5/network-architecture-documents/dynamic-address-assignment-in-ipv6-using-slaac-and-dhcp/ta-p/3109128

@dkn – i agree with you, there is checking to do
Q646 – completly agree
Q459 – is neighbor…… ebpg-multihop [2] in the previoous dumps
Q665 – i would like to debate, since they are asking for the SMALLEST variance for unequal LB. 1 does not load balance, so for me the answer might be 2.

i noticed also an error here:
QUESTION 545
multicast application must be accessible between sites, but not be accessible outside of the organisation. Based on the scoping requirements, the multicast group address
for the application will be allocated out of which range ?
A. FF00::/16
B. FF08::/16
C. FF02::/16
D. FF0E::/16
Correct Answer: B => SHOULD BE C

@ELO & Amy, now I’m not sure anymore. the link you (ELO) provided under the “Stateless Address Assignment”: Additional configuration on the server is necessary before the same information can be provided to the client as Stateful DHCP. Now I think the answer is C? =o/

Lol you guys are funny. Some say its B, some say C. I’ll just do my own research again if i can find anything because before i couldn’t. I don’t wanna get confused in the exam. Btw most Dumps questions are wrong aswell…so be careful.

well reading this, ill choose option D. https://thenetworkway.wordpress.com/2014/07/02/ipv6-address-assignment-stateless-stateful-dhcp-oh-my/

Is jazzy 477 dumps valid.?
and kikivich 477
or which one valid now?

anyone opening VCE from nnneettwwoorrkiingg in a Mac machine? i downloaded a vce player but i only get to see 5 questions from his VCE. can anyone recommend a vce solution

thank you

Greetings Guys,

I want to pass CCNP Route , Do you know some good documentations or videos that can help me pass the exam and also master all routing protocol . I need to do it in 3 months

Thanks for your reply

Hello

Here’s the dumps for exam. I pass the exam recently.

Enjoy Guys,

https://drive.google.com/drive/folders/1gtAgjNpaS6Te-ovyZIPrazQqtchZX-pU?usp=sharing

@GB , what materials did you use for study ??????

@GB
Are jazzy 477 dumps also valid or not.?
And your dumps valid?

Does anyone have a link to the SPOTO route .VCE File ?

@ELO
ff08 – Organization scope: Intended to span multiple sizes within the same organization

ff02 – Link Local: spans the same topological region as the corresponding unicast scope, i.e. all nodes on the same LAN

ff05 – Site local: is intended to span a single site

looks like ff08 is correct to me. hope this helps.

@All,
Please guide me what best videos and books to master CCNP and pass the exam ?
your comments and your experience will be very appreciated .
Regards

QUESTION 534
Which task must you perform to enable a point-to-point Frame Relay connection ?
A. Configure the encapsulation type
B. Disable inverse ARP
C. Enable inverse ARP
D. Configure static address mapping

answer shows D, don’t you need to configure the encapsulation type frame-relay command under the interface? so answer A?

@mikee

I buy the studies materials and I use VCE player which is provided by the vendor.
@kk
It’ll valid. I studied all the VCE and PDF. You can check in my folder that I shared.
I remove the VCE player. PDF may enough for you. You can buy VCE player from someone else.
You can trust. And one more things I just wanted to remind, when you were in exam don’t rush keep calm and focus. You can pass. I should get 1000 instead of 950. I miss out some step in lab. So don’t rush. Fighting..!

@Irfan

Do you remember anything about the new Frame relay DND? Thanks.

@GB
Appreciate your generosity for sharing the file. This will help me a lot in preparing for my exam.

@bubbles

those 2 questions are kind of the same, you think both answers is FF08:/16? in the dumps looks different, i understand the scoping you meant (FF08=>cross sites xcast)

QUESTION 545
multicast application must be accessible between sites, but not be accessible outside of the organisation. Based on the scoping requirements, the multicast group address
for the application will be allocated out of which range ?
QUESTION 699
Company is deploying a multicast applic ation that must be accessible between sites, but must not be accessible outside of the organization Based on

Just Passed MY CCNP ROUTE EXAM WITH 88X POINTS,
SPOTO 146Q is Spot on!!!
It really Helped.
All question were relevant to the exam.

@Ninja

what do you mean with SPOTO 146q? can you share the dump?