Share your ENCOR v1.1 Experience

Passed today!!!
About 10 new questions – for example — What is the purpose of LISP.
Aslo new questions on Macsec and Wireless technology.
If you know the technology you should be good.
Labs are :
Rapid PVST+ and LACP Sim
VRF Configuration Sim
OSPF DR BDR Sim
eBGP Neighbor Sim

I had my exam recently and preliminary result is passed.
I would recommend learn (not memorize) all questions which are accessible here.
Most questions are pretty the same, some are quite similar, but with different answers.
Labs I had:
Rapid PVST+ and LACP Sim (port-channel didn’t work without command “switchport trunk allowed vlan 500”)
VRF Configuration Sim
OSPF DR BDR Sim
eBGP Neighbor Sim

Good luck everyone!

Is anyone able to share a PDF copy of the questsions faced recently?

how soon after and how did you get results? after exam?

Preliminary passed whatever that means. Questions were mostly if not ALL form section 1. I have VRF, OSPF with Prefix Lsit, eBGP, Rapid PVST. One question that was changed was the equation that shows here the answer is 25 but the naswer there was 70 magic num it was magic num=5 but the equation was 2+(num)x10 i think.

can anyone tell me how long it takes to prepare for exam from this website ?I want to recertify CCNP enterprise exam .

Passed ENCOR yesterday – 5 new questions but rest all from digitut site.

SIMS:
====
Rapid PVST+ and LACP Sim
VRF Configuration Sim
OSPF DR BDR Sim
eBGP Neighbor Sim

@digitaltut please try to trim some of old questions. There are almost tousands of questions and I believe half of them unnecessary.

@ar

Try to understand all questions from digitaltut…. Because if you memorize them you fail!!!!

I took the Exam yesterday and passed, Like others have said there are many new questions, you cannot just memorize the answers. There are enough questions here to study by going through the new and old sections. You get a preliminary print out of pass or fail when you finish. I would suggest going through both the new and old questions.

Just passed my ENCOR exam now. 87 questions and 4 lablets.

Encountered two new questions. One of which is configuring a flexible Netflow. You’ll need to choose two correct commands. I answered “export-protocol netflow-v9” and “destination ”

Also, there was a variation in the supposed drop down: JsonEncoder, encode, data

Choices were:
>JsonEncoder
>JsonDecoder
>.encode decode
>data

I answered “JsonDecoder, decode, data” instead.

=======

Lablets:
>VRF Configuration Sim (tasks 1 & 2 only)
>Rapid PVST+ and LACP Sim (tasks 2 & 3 only)
>eBGP Neighbor Sim
>OSPF DR BDR Sim 2

Could anyone please send me the question bank to jotalopz(at)gmail(.)com

I have passed the exam. 87q and 4 lablets. There are about 10-15 new questions. And most of the questions I got are from the old question bank.

As recommended by Digitaltut, you need to pass the big composite questions more than 10 times. But even if I passed the big composite questions more than 20 times, I was still unsure if I will pass or fail.

Please note that you must study the topics. NOT memorize the answers. Questions are somewhat similar but if you check the choices, they are different.

Lablets are the easiest ones. Almost on point with digitaltut. I got the following.
EBGP neighbhor sim – the other router was asked to be configured and not R3.
Rapid pvst + lacp – portchannel was configured access port. Need to fix this
VRF configuration – source and destination needed to be added on the tunnel. Then protect it using ipsec.
OSPF DR BDR Sim 2 – same with what is here

Goodluck to anyone taking. Study more. Dont just rely on dumps.

Could anyone please send me the question bank to jotalopz(at)gmail(.)com

Can someone let me know how to access big composite questions…?

Hello everyone, I would like to ask you if you know what score is needed to pass the test and if the labs have a greater weight in the grade. thanks

Hi. Any news about the exam and questions?

Passed my ENCOR exam today. 87 questions and 4 lab.
Thank you Digitaltut Premium Member Zone.
LAB
– VRF Configuration Sim
– eBGP Neighbor Sim
– Trunk UDLD & LACP Sim
– OSPF DR BDR Sim 2
Recommend study ENCOR v1.1 Questions – Part 1 – 4 , ENCOR Questions – Part 4 – 11 and Architecture Questions to Drag Drop Questions 2. All question at here.

Hello, off topic question here. I passed my ENCOR exam and it will be expiring this coming June and I haven’t taken any of the concentration exams yet. If I passed ENARSI on June, will I be getting CCNP or not because my ENCOR already expired by then? Thanks in advance.

@ Ide
For a CCNP you need a (valid) core exam e.g. ENCOR & a (valid) concentration exam e.g. ENARSI.
If you pass ENARSI after expiration of your ENCOR the prerequisite for the CCNP are NOT given.
So – do your ENARSI bofore (!) expiration of your ENCOR and everything is fine.

Passing just the Encor only renews valid CCNP R&S recertification takers. If you never had the older R&S you must pass the Encor and a concentration exam before your Encor expires. Having had the passed the CCNP R&S a few times and also the v1 Encor my opinion is the Encor certification is garbage. You will learn alot more from the older CCNP R&S books and be a better Engineer who can actually work on equipment.

I can see that there is SOME questions from Architecture Questions to Drag Drop Questions which for some reason do not appear in part 1 to 11. Does these questions actually appear in the exam?

Where can I find those ENCOR v1.1 Questions Part 1–4 and ENCOR Questions Part 4–11 everybody is talking about?

Hi all,
Anyone can guide me for updated exam of Encor 350-401

@darkvikingbrah & @Saqib
In the right upper corner klick on “Premium Membership”, create an account, pay a few $$$ and bingo!

Any news about the exam? Thanks.

Hello everyone,

How long is Cisco ENCOR certificate validity period?
Thank you.

@petar
it is 3 years like all other cisco certs

Is the premium membership and payment anonymous?

Passed my ENCOR exam today. 87 questions and 4 lab.
LAB
– VRF Configuration Sim
– eRapid PVST+ and LACP Sim
– eBGP Neighbor Sim
– OSPF DR BDR Sim 1
Recommend study ENCOR v1.1 Questions – Part 1 – 4 , ENCOR Questions – Part 4 – 11

kkmm
what is questions part 1-4 and part 4-11?

I am studying the ENCOR V1.1, do I need to study the old version to pass the test as well

Dear digital-tut, is there anything new? Have more new questions been added after February 1st? please need your support and update information.

I have just passed; for those in a hurry as I was – questions v1.1 1-4 & labs were more than enough.
Note: Don’t memorize the answers; try to read or Google the explanations.
Good luck

I took my exam today and got failed

Passed 87 + 4 sims

VRF Configuration Sim
OSPF DR & Summarization Sim – clear proc worked, but still had to wait for route to update.
Trunk UDLD & LACP Sim – task 1, 2 and 3 only, be sure to allow vlans otherwise pings don’t work.
eBGP Neighbor Sim – different AS and on router 2.

Question mostly from ENCOR v1.1 Part 1-4 and just couple from Part 4-11

Had 1 new Q, Picture of WLC asking what to set for authentication and display a webpage to change password.

I think is “801.x and exception redirect webpage” ??

Thank you, DigitalTut for helping me get through this exam.

Took my test, but got a bunch of Cisco DNA questions. Did not pass. Back to the drawing board.

The Sims were from here, but it did feel like there were 10 or so new questions, and some of the older questions from version 1.0 were there too.

Passed my exam today! Thank you so much @digitaltut.
Friendly reminder, please do not rely fully on the dumps. You need to study all the topics listed
However, this site is very reliable it almost cover all exam questions including the lab sims.
87 questions plus 4 lablets
I got : OSPF Prefix List, Troubleshooting LACP, eBGP neighborship and I am sorry because VRF configuration.

@SilentReader Congratulations
Is Encor V1.1 questions 1-4 enough or do I need to go through 5-11

I took the exam with SilentReader and we both passed.

87 questions and 4 lablets.

87 questions:
+Make sure to review ENCOR v1.1 and ENCOR Questions Part 4-11. Do not jut rely on ENCOR v1.1 and do not skip part 4-11.

4 lablets: Tasks and configurations are not exactly the same to all lablets simumlations here but the lablets here will surely make you experienced enough to answer these real exam lablets. We highly recommend to use the EVE-NG files here.

+ OSPF DR
+ eBGP
+ OSPF Summarization
+ Trunk + LACP

Sorry, I was wrong about the lablets in my exam:

+ OSPF DR and Summarization
+ eBGP
+ VRF CORP via Tunnel 0
+ Trunk and LACP

@SleepyReader
how many multiple choice questions were from part 4-11? were most questions from v1.1 1-4?

Hi, Guys, i am planning to pass this exam. I want to ask, In this exam, only questions or will be practice labs? In comments i see,all write about labs, but on the Cisco website, I see:

The Cisco CCNP ENCOR 350 401 exam consists of 102-120 multiple-choice and multiple-answer questions.

@Anonymous : Thank you

From my experience, 95% of the exam is already covered here.
I suggest to study everything, from Encor v1.1 Part 1-4 , Old Encor questions Part 4-11, and lab sims. If you have more time please also study the Architecture to Drag and Drop questions and make sure to pass the Big Composite quizzes at least 15times.

Good luck everyone. Hoping for good results.

@Ghrety as per my experience, most of the questions, around 70%, are from ENCOR Questions Part 4-11.

@MAZAKI

87 questions and 4 lab/lablets.

I have passed today.

never reached 90% here on digitaltut.

Labs are :
Rapid PVST+ and LACP Sim
VRF Configuration Sim
OSPF DR BDR Sim
eBGP Neighbor Sim

—–

“OSPF DR BDR Sim” was twisted,

Task 1:They asked R20 and R3 not to participate in DR/BDR election for area 20. So I assume they wanted a point-to-point connection between R20 and R3.

Task 2: was something to cofigure on R3, i dont remember fully.

1 more addition:

Rapid PVST+ and LACP Sim

1. The trunk between SW10 and SW30 is not operational. Troubleshoot the issue and ensure PC3 can ping PC1 (10.10.100.10) across the link.

2. Configure Aggressive unidirection link detection on SW 10 port Eth0/0.

3. The LACP port channel between SW10 and SW20 is not operational. Troubleshoot the issue and ensure PC3 can ping PC2 (10.10.100.20) across the port channel.

At point 3 an additional vlan (vlan1) was added already to the channel group 10, so the port channel did not form until I added both vlans to the port channel interfaces

@Stilldsm, are you confusing Trunk UDLD & LACP Sim lab with Rapid PVST+ and LACP Sim lab? Having to configure “udld port aggressive” is not on the Rapid PVST+ lab.

@Stilldsm. Sounds like you had the Trunk UDLD lab and not the Rapid PVST+ lab. Can you confirm?