Share your ROUTE v2.0 Experience

can some one share the lates dumps at {email not allowed}

Hi All,

I am new here passed my CCNA today. Is this site helpful same as CCNA 9tut?

HERE is the NEW May 2018 Files:

https://docs.google.com/document/d/1NAK_6RmmscLYzSE_tVo3ouFqiRuCjKbdOSJwl5M8cCE/edit?usp=sharing

Ebooks Cisco Free, Free virus, no spaces in : https:// upload4earn.org/users/manuelspt55

I have to take exam on tommorow
Please share CCNP Rouet vce exam
I really need it

my gmail is

{email not allowed}

my gmail is

stargenius.love @ gmail.com

help me please

Question 227
Which two commands must you configure on a DMVPN hub to enable phase 3? (Choose two)

A. ip nhrp interest
B. ip nhrp redirect
C. ip nhrp shortcut
D. ip network-id
E. ip nhrp map
F. ip redirects
Answer BC is NOT correct.

The correct answer is BD.

ip nhrp shortcut is intended to be used on spoke routers, not hub.

@rrr.

authentication
-supports a local database for device access
-supports encryption

accounting
-enforces time periods during which a user can access the device
-specifies a users specific access privileges

authorization
-verifies network usage
-not supported with local AAA

============

Accounting CANNOT enforce anything. Only authorization can enFORCE.

@TCP-Connect

I think the DND is correct the way i had it… I dont think yours is correct… can anyone confirm?

I also think that Question 227 is redirect and shortcut

…

I also have a question,

Q222
Ao admioistratir oeeds ti setup ao NTP clieot ti privide updates ti lical withiut syochrioiziog ti
server. What is the cimmaod?
A. Serve
B. Serve-ioly
C. peer
Aoswern B But i think the answer is A. Anyone have a clue?

Q225
Wheo ispf is firmiog ao adjaceocy, io which state, the actual exchaoge if iofirmatio io the liok
A. INIT
B. liadiog
C. exstart
D. exchaoge

Aoswern B. Someone mentioned that its C. exstart? How is that possible? can anyone chime in?

@TCP-Connect. I apologize, your DND is correct

Dan_2_One,

Q225, this question is tricky.

In exstart state, routers establish a master-slave relationship. This is not the ACTUAL exchange of information.

In exchange state, routers exchange DBDs (DataBase Descriptions) that DESCRIBE the contents of the entire link-state database. This option may be correct. But in this option the exchange happens in a preliminary mode, this is not the actual exchange.

In loading state, here is the excerpt from Cisco Docs: “In this state, the actual exchange of link state information occurs.” :
cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

So the correct answer is LOADING.

Dan_2_One,

Q222
Ao admioistratir oeeds ti setup ao NTP clieot ti privide updates ti lical withiut syochrioiziog ti
server. What is the cimmaod?
A. Serve
B. Serve-ioly
C. peer
Aoswern B But i think the answer is A. Anyone have a clue?

====================
The access list-based restriction scheme allows you to grant or deny certain access privileges to an entire network, a subnet within a network, or a host within a subnet.

NTP communication consists of time requests and control queries.

A time request is a request for time synchronization from an NTP server.

A control query is a request for configuration information from an NTP server.

For details on NTP control queries, see RFC 1305 (NTP version 3).

The access group options are scanned in the following order, from least restrictive to most restrictive:

Peer: Permits router to respond to NTP requests and accept NTP updates. NTP control queries are also accepted. This is the only class which allows a router to be synchronized by other devices.

Serve: Permits router to reply to NTP requests, but rejects NTP updates (e.g. replies from a server or update packets from a peer). Control queries are also permitted.

Serve-only: Permits router to respond to NTP requests only. Rejects attempt to synchronize local system time, and does not access control queries.

Query-only: only accepts NTP control queries. No response to NTP requests are sent, and no local system time synchronization with remote system is permitted. If the source IP address matches the access lists for more than one access type, the first type is granted.

==================

The question doesn’t mention about “control queries”, so we can’t figure out which of the two answers is correct.

I would say Serve-only.

Dan_2_One,

“ip nhrp redirect” should be configured on the hub, which informs to the spoke that it can communicate to other intended spoke directly.

“ip nhrp shortcut” should be configured on the spoke which is responsible to rewrite the CEF entry after getting the redirect message from hub.

ip nhrp network-id : Enables NHRP on the interface.

cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nhrp/configuration/xe-16/nhrp-xe-16-book/config-nhrp.html

As you see, this command is a must on a hub and all spokes.

Took the exam today. 53 questions, only three labs showed up (EIGRP Stub, OSPF & EIGRP Evaluation Sims). They were exactly as they appear here on this website. I had 6 new questions that I haven’t seen elsewhere (can’t recall the exact questions, but 1 was about SNMP, I forgot the rest). Just use the knowledge from your studies or from your work experience, and you should be able to do elimination to get rid of the wrong answers.

Dnds and all other questions can be found here. Best of luck to everyone.

I collected some posts about exam q-s, which people got
I hope it helps

Maybe we can extend the Q91 or jazzy PDF and VCE with these.
Many of them overlap of course

There is the date, you can check the original post.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Mark
April 11th, 2018
4,143, 211, 215, 249, 259, 260, 261, 266, 268, 390, 391, 395, 409, 415, 435, 438, 439, 440, 441, 443, 444, 445, 446, 447, 448, 449, 450, 451, 452, 453, 454, 455, 456, 457, 458, 460, 462, 463, 467, 476,
442 459 477 421 270
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Binsiddique
March 21st, 2018
4 49 143 151 157 171 182 183 186 190 192 202 237 259 260 261 266 268 387 388 390 391 409 415 435 438
439 440 441 442 443 445 446 447 448 449 450 451 452 453 455 456 457 458 459 460 64 477 270 DND 444 DND 454 DND

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2018.04.03.
82 ,89 ,96 ,99 ,104 ,107 ,115 ,127, 152 ,153 ,159 ,163 ,168 ,182 ,183 ,186 , 187 ,192 ,206 ,220 ,260 ,26 ,281 ,315 , 318 ,357 ,379 ,388 ,390 ,431 ,434 ,441 ,451 , 452 ,456 ,461 ,462 ,463 ,465 ,469 ,471 ,472 ,474 ,476 ,477
Drag ,& ,Drop: 235 263 270 400 473
Labs: PBR, EIGRP stub.

Another one tricky question (177 in 477Q):
A network engineer wants to ensure an optimal end-to-end delay bandwidth product. The delay is less than 64 KB. Which TCP feature ensures steady state throughput?
A. Window scaling
B. Network buffers
C. Round-trip timers
D. TCP acknowledgments
Correct Answer: A <– possible B

The DELAY in KB? Something wrong with this question!
Assuming they're talking about "window size" we can recall the windows scaling require the "windows size" 65535 at least. In this case "network buffers" is best of the rest answers. Isn't it?

Q328 from 477

What is the efect if the distribute-list cimmaod io the R1 ciofguratio?
A. R1 will permit ioly the 10.0.0.0/24 riute io the R2 RIP updates
B. R1 will oit flter aoy riutes because there is oi exact prefx match
C. R1 will flter the 10.1.0.0/24 and the 172.24.1.0/24 riutes frim the R2 RIP updates
D. R1 will flter ioly the 172.24.1.0/24 riute frim the R2 RIP updates
ans: c

Rip support auto summary so wouldn’t it mean it will permit 10.0.0.0/8 and deny only 172.24.1.0/24?
Your thoghts please?

anyone pass exam recently ?

@TCP-Connect About DMVPN spoke to spoke, you do need ip nhrp redirect and ip nhrp shortcut on the hub. Have a look here:

http:// blog.ine.com/2008/12/23/dmvpn-phase-3/

I passed the exam! The score is 98x. Hurray!!! )))))))))

The exam, approximately for 90-93%, was from dumps (477q and 91q). It was VERY VERY VERY EASY. At least, for me =))) There were new questions. I was very quick at answering all questions, so I don’t remember them. The LABs are EIGRP Stub, EIGRP eval, OSPF eval.

One of the new questions is about NetFlow 9. I forgot the exact formulation of the questions, but there were the following options: a) it is cisco proprietary b) standards based c) IETF standard d) smth ingress (smth –> I forgot the exact wording, so “smth”) e) smth ingress f) both “smth” ingress and “smth” egress
Another question was about VRF.. there were two static VRF routes. and the question is.. what you will see if you do “show ip route”. NOTE here… “show ip route”, NOT “show ip route vrf”, so the table was empty with “the default gateway is not set”.

One more moment:
QUESTION 31
Which feature can mitigate fragmentation issues within network segments that are between GRE
endpoints?
A. PMTUD
B. ICMP DF bit
C. TCP Flow Control
D. TCP MSS

In the real exam, there was no pmtuD, just PMTU (without D). So I chose TCP MSS.

It is a lie that there were TONS OF IPv6 questions. There were just a few of them. Many IP SLA questions.

One new question is about Frame Relay. I forgot it. Actually, it was pretty hard.

DnDs:
IPv6 transition techniques (NAT-PT,6to4,GRE,ISATAP)
adverse network conditions
ACL DnD
LCP/CHAP DnD
NAT64/NPT DnD
Frame Relay DnD
GRE DnD
uRPF

From Prince v9, in the exam there were the following Qs:
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 (—> 17th question was with modification.. the question was that on BR1 “eigrp stub” configured.. 4 or 5 options (=answers) with the possible “show ip route” outputs of HQ R1.. I chose all routes.. because on BR1 there are just two CONNECTED networks, so it will ADVERTISE them to other routers), 19, 21, 22, 23 (btw, I chose the “distribute-list” option here.. and based on my score, I was correct =)).. ), 24, 25, 27, 28, 29, 30, 31 (without pmtuD, just PMTU. I chose MSS), 32, 33, 34, 35, 37, 38 (is about two static vrf routes I described above. the answer is C), 39, 40, 42 (=MD5, and alas I had to choose plain-text), 64, 65, 70, 71, 73, 74, 75, 79, 83, 89, 91.

As all of you see, the Prince v91 is VERY VERY VERY VALID. Hurry up to take the exam… until dumps are valid.

I want to thank the community, wish good luck to its members !!!))))

BYE ))))

Just passed 9XX. Thank you Digital tut. I used CBT Nuggets +CCNP Success Series and without Digital Tut subscription I would not have passed.
New Drag and Drop config question on Serial/Frame relay config where you have to know sub-interface and where to state DLCI among other things I can’t remember
This is my second attempts – Twice now I got a questions with 3 routers, all running EIGRP, they make one a stub and then you have to predict how the routing table looks on the others… Weird questions.
Labs on Digital Tut are all good.

@TCP-connect
what is the DnD in the exam for a)GRE DnD and b)uRPF?
i cant get in my dump and sample

@TCP-Connect @MDLT
congrats!
thank you for sharing!

@TCPC-Connect

Well done! Do you have the dumps for 477q and 91q please?

Passed the exam today with a 8xx

Shout Outs to Prince and the 91q, VERY VERY VALID!!!

Got a question about “show ip eigrp vrf purple topology”, don’t remember specifics but may of got it wrong. Unless it was in 477 and dexter and I missed it then shame on me. If anyone can elaborate on it that would be awesome.

Got the EIGRP Stub, PBR, and EIGRP Sim

DND were all from 477 and dexter!

Good luck to all thanks again for a great community!!! see ya at switch!

@Thor could you please send dumps?

TCP-Connect
Thor

I am happy you passed route and gave feedback :)
On monday I’m next :)

Thor

was it sg like this?
what options were there?

—what does the command show ip vrf PURPLE show:—

1- shows the feasible successors for a specific route table–
2-other options
3-other options
4-other options

@rrr

yes that one! two other answers were referring to a global table and two refer to specific table

@Mahmut

Scroll through pages

@Thor

I found this on page 81-84
which one did u choose?

so what is the correct answer?

Hi,

Question154
Other thao a wirkiog EIGRP ciofguratio, which iptio must be the same io all riuters fir EIGRP autheotcatiokeyrileivertiwirkcirrectly?
A.SMTP B.SNMP C.Passwirds D.Time

Is correct answer C or not?

Hi,
Could you please help me for this question also?
Which two reasons for IP SLA tracking failure are likely true?

A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing in R2
D. The default route has wrong next hop IP address.
E. The threshold value is wrong.

Rapid Commit
The DHCPv6 client can obtain configuration parameters from a server either through a rapid two-message exchange (solicit, reply) or through a normal four-message exchange (solicit, advertise, request, reply). By default, the four-message exchange is used. When the rapid-commit option is enabled by both client and server, the two-message exchange is used.

Which priticils suppirt DMVPN?
A. EIGRP
B. RIP2
C. OSPF
D. BGP
E. ISIS
Aoswern ABC

doesnt it support BGP???

@Mahmut

according the latest discussion here ip sla answer is A and C

when do you take the exam if I can ask

@TCP-Connect

Congratulations!

Is it possible to pass using just 91q Prince dump + DnD from 477q and studying the labs?

@rr 11.05.2018 is my exam day.

I have some dumps all question are included. However some answer is conflicted.

Q422
Hiw cao yiu ciofgure a seciod expirt destoatio fir IP address 192.168.10.1?

A. Specify a difereot TCP Pirt
B. Specify a difereot UDP pirt.
C. Specify a VRF
D. Ciofgure a versiio 5 fiw-expirt ti the same destoatio.
E. Specify a difereot fiw ID

dump says B…. But other dumps say C and i think its C. Does anyone know?

nevermidn its B

Hi!

In 477q,
QUESTION 203: Which configuration can you apply to a device so that it will always blocks outbound web traffic on Saturdays and Sundays between the hours of 1:00AM and 11:59PM?

Why is the answer C? My personal answer is B (time-range SATSUN periodic Saturday Sunday 1:00 to 23:59) since i think that military time should be used. Anyone has an idea on this?

@tipsy, it is B

Which priticils suppirt DMVPN?
A. EIGRP
B. RIP2
C. OSPF
D. BGP
E. ISIS
Aoswern ABC

doesnt it support BGP????

@Tipsy > Why is the answer C?
Because 477Q has a lot mistakes made intentionally. Initially I did an estimate of 7-8%, but now I believe that there are about 10% of mistakes. By the way, possible Q203 is an incorrect question, because it says “OUT”, but it doesn’t offer a good answer with outbound filtering. In current version of question I would say “B”.

@Dan_2_One,
Answer is “EIGRP/OSPF/BGP”. The reason the same I mentioned above. DO NOT USE 477Q as you PRIMARY dump. Use Dexter and then see 477Q for NEW questions only.

.
.
.
.
Do anyone wants VCE file of 477v31 dumps???????????????
.
.
.
.

.

@Jazzy can you please share vce?

Can someone share dexter dumps?
And yea can you share the vce?..