Share your ROUTE v2.0 Experience

congratulations kamus, do you remember the new questions?

@kamus do you mean 80% of the question were from the 90q or 80% of the new question you saw were from the 90q?

SO what are the best dumps to get prepared ?

@Jazzy,

Where i can find your file. I went back few pages but did not fine.

plz share the page No.

I need the jazzy 91q file plz can anyone shre the page No.

@Kamus do you remember any new question to share with us please?

Hi Everyone,

if you have valid dumps please share the link

Jazzy, please send me the latest dumps at {email not allowed} Thanks in advance

@KamUS, I read this before, but can’t understand your explanation.
FIB table for Forwarding Information Base.
Adjacency table for Layer 2 addressing information.
The question asks about Forwarding Information Base, so, I guess, answer should be A:
“FIB table only”
Why dou you think answer should be C (FIB and adjacency tables only)? Could you explain this more detailed?

Which three statements are true when configuring redistribution for OSPF? (Choose three)
A. The default metric is 10
B. The default metric is 20
C. The default metric type is 2
D. Subnets do not redistribute by default
E. Subnets redistribute by default
Ans: BCE
i think its D and not E, when you redistribute is ospf you have to add the word SUBNETS is order to redistribute classless subnets.

@Hello, which dump do you use? You have an incomplete question (it’s miss a option with “The default metric type is 1”). If you would find a complete question, you will see your assumption is correct.

@Dan_2_One

Correct answer is C for 422

@ All Fellow Members

I have 557 questions dumps. these contain all questions 477 and 91 and as far as comments till date I have studied include these questions. They are still valid and updated on may 2nd. please let me know and I will share the link

@Marcus
Thank you, i’m studing the jazzy vce

at the PBR sim how do I know the next hop IP address?
thanks

2) Route map that sets the next hop address to be ISP1 and permits the rest of the traffic:
BorderRouter(config)#route-map pbr permit 10
BorderRouter(config-route-map)#match ip address 101
BorderRouter(config-route-map)#set ip next-hop 10.1.101.1
BorderRouter(config-route-map)#exit

@404eno
80 percent questions were pulled from the question Jazzy 91. You’re going to encounter new questions that I hardly remember enough to memorize them. I remember one was about access-list that you need to apply from DHCP to a router.
If you study Jazzy 91 questions you’ll do well. All DND’s are the same (meaning were posted here before)
Labs: PBR. Eigrpstub and Eigrp eval

Is still 477 dump vaild?

Hey guys,
Is the Jazzy v3 pdf (from her google drive link) which has 94 mcq, same as the prince 91 q?

If someone can confirm, I will give the exam tomorrow and update the results once again. :)

I think it is

@KamUS,
Can you confirm the 91 dump can help for current exam?

.
.
.
Cheaters
.
.
.
.
.
.
.
Whats up?????

Jazzy

HEATERS! pls GO TO HELLلنفخك

you are not helpful person, so shutup your mouse as you are useless in our NW community

@Jazzy

ChEATERS!

you are not helpful person, so shutup your mouse as you are useless in our community

.
.
why what happened ???
.
.
.
I already helped.
.
.
.
if you people need some more help then
.
.
.
ok. let me know cheaters????

.
.
.
I am waiting

hey Jazzy

I take the exam on the 20th, I have 2 more days

If i succeed, I buy you a beer.
If not, then I buy myself two :)

Can someone take an exam on weekend?

@Jazzy, should I study all the DND’s available from the 477 q or just the 19 ones in jazzy v3 pdf? would that be enough?

@rrr
.
.
.
.
.
o i know i will get the beer
.
.
.
Cheerssssssssss……..

@C!sco1234567890………………………………1000000000000000000000000000000000
.
.
.
.
.
.
.
yes cheater bro
.
.
.
.
.
.
the 19 DnDs in Jazzy v3 is enough.
.
.
..
.
i also get the same DnDs in my exam bro.

Jazzy

deal :D

did u get q-s that were in the 477 but not in 91?

I remember 2 such q-s

@rrr
.
.
.
.
.
almost 10 MCQs were totally new. they were not in the dumps neither in 477 nor in jazzy v3.
.
.
.
.
in the rest, 80% were from jazzy v3 and 20% were from 477 v31.

@Jazzy

What was Your score?
Are have the different answers the prince corrected 477 and yours 477 ?
also in Your 94 q and Prince 91 are the same or not ?
Digitult and Dexter which is more accurate because they for some questions are different answers with different explination on of those question was from NPTv6 limitation theDexter says 1 to 1 prefix rewrite and Digitult say mismatch prefix rewrite ?

I would like to THANK YOU IN ADVANCE YOU DOING WELL JOB HERE.

@Jazzy

Also in Evalutaion OSPF sim question 2 what was You answer timers or neighbors?
In PBR You added a second statement for route-map …. permit 20 or not necessary?

@Jazzy

In EIGRP stub sim had You got some bugs with 2 subnets or not?

Please be more clearful to all of us to be prepare for all of this f..ing sh..t

Someone555

hey, come one. I already mention that 477v31 and jazzy v3.

and your ospf and eigrp answers are already in jazzy v3. i did the same as jazzy v3!

Hey jazzy why are you doing that? people just need help to pass the exam.I think that is why this site exists. Please help! help! help!

josue read carefully the last pages, it helps

@Jazzy

Please share You score approximately 8xx or 9xx to understand how much is accurate your jazzy version 3 file .

Thanks

i Passed, prince 91Q is enough to pass no need for 477Q dumps, Got 1 new question, 1 new drag and drop, the labs same of digitaltut with same IP’s and detailes, for evaluation LABS if you lazy just memories the answers, its so simple
thanks for everybody especially Prince

P@ssed could you send me 91Q to this address i will much appreciate
spiderman _ roof @ yahoo dot com

@Someone17 @C!sco123
Prince91q has 91 questions which are just the SAME with Jazzyv3. If you want to review with just 1 file, you can try Jazzy’s 91qv3. It has additional Q&a (92-94) DnD and sims. So basically, all-in-one file. :)

Try 477q though if you have spare time.

Thanks @jazzy and @prince. We all appreciated your help in collating q&a! :)

My score was 890
.
.
.
Be careful every one Prince 91Q have only mcqs. There is no DnDs, no sims, no labs.
.
.
.
You cant pass the exam if you people only study Prince 91Q.
.
.
.
If you people really want to pass study the 477v31 or at least jazzy v3.
.
.
.
.
Other wise its impossible to pass the exam.

Drag and drops ans sims from this websites as i mentioned

For those who have taken exam with pbr lab, did you still execute this command?

route-map permit 20?

@Tipsy

should execute, because

“BorderRouter(config)#route-map blockftp permit 20

(Notice: blockftp is just name of route-map, u can use any name. The route-map blockftp permit 20 line allows other traffic than HTTP to be routed. Otherwise, other traffic will be dropped)”

when do u take the exam?

@Tipsy

I am very surprised on you. In the coming future you will be considere as a network engineer. And you even dont know that after every ACL and route-map there is a implicit deny statment for this we use the permits statement after every ACL and route-map.
.
.
.
So what do you mean by still execute???

Of course for the rest of traffic you will use the permit statment.
.
.
.
.
Only get certified because of the dumps is not enough my bro. You need to learn about these very basics concepts.

what is the passing score at he exam nowadays?

@Jazzy

maybe he didn’t noticed that traffic other than http must flow as well

Jazzy

did u have this?

what is an IPV4 equivalent of IPV6 Neighbor Discovery protocol?
a) cdp
b) arp
c) ICMP

@Tipsy, @rrr, @Jazzy in case with PBR you shouldn’t use excplicit permit int the end of route map. See Official Cert Guide:
“All route maps have an implicit deny clause at the end that matches all packets not already matched by the route map. PBR processes packets that match a permit clause using the defined set command. For packets matched by a deny clause, PBR lets the packet go through to the normal IP routing process.”

“Had the route-map command listed a deny action, Cisco IOS would simply route the packet as normal—it would not filter the packet.”

@rrr

Yes