Share your ROUTE v2.0 Experience

@TAM
Based on this: “The first match decides whether the switch accepts or rejects the packets. Because the switch stops testing after the first match, the order of conditions in the list is critical.” is the answer A definitivly wrong
D is correct!

MALI warka keen

Dear ALL,

i prepare the 91 and 477 question please share your current experience, i have exam this week,

Dear ALL,

Does anyone know if at the OSPF EIGRP Redistribute Lab, in the real exeam, is it posible run “help or ?” at the redistribute ospf 1 metric line command ? The idea is to get help to know the next attribute.

I’ve been studying for months for this exam, have well over 200 hours invested in books/videos/week long class/labs etc. How anyone can study a dump in a day or two and go pass the exam without any other preparation is crazy. What happens when you actually need some skills on the job? A paper ccnp is not a true ccnp. You won’t get past a technical phone interview for any job if you are a paper ccnp with no knowledge. Employers see through that quickly. This exam IS hard. Don’t cheapen it by only studying dumps.

@boder A lot of the questions on the exam are hardly taught on the official books or courses. The exam is low quality and often the labs are buggy and wrong. Many people study the material then use dumps. Understand the other side. Yes it is wrong but its not just black and white.

Understood, I did mention “without any other preparation”. For someone to not study at all, then study a dump a day or two before the exam is not something that is worthy of a congratulations. You memorized questions without doing any other study. Anyone can do that, it takes no skill at all. It cheapens the cert. Just reading through the posts on this site with people asking for dumps ticks me off because I know all of the nights and weekends I’ve spent preparing for this exam, and I’m still not ready. If they’ve already failed but have studied hard I get it, but there are a lot of people on here thinking it’s an achievement to study a dump and nothing else and go pass a test.

@Boder
I do not speak for everyone but I know I typically come here when re-certing my NP. I work in the biz everyday and got this cert years ago by studying my ass off. When it comes re-cert time I come here not to waste 400 beans on getting tripped up by a poorly worded question!

Oh I hear you A_mild_fart, and funny name btw :)

What gets me is the people on here that say the ONLY thing they study is a dump, then say the test is easy, then others say “great score!”. Gimme a break, of course the test is easy if you only study a dump!

A senior network engineer tries to propagate a summary route 209.165.201.0/27 to R2 by
redistributing static route on R1, but setup is not working. What is the issue with the configuration in
the exhibit.
A. The summary route is in the global routing table.
B. The wildcard bit in network command is incorrect.
C. The redistribute command is in the wrong address-family.
D. The route target is missing.

the answer: a , it should be B .. please confirm with me …

Dear ALL,

Does anyone know if at the OSPF EIGRP Redistribute Lab, in the real exeam, is it posible run “help or ?” at the redistribute ospf 1 metric line command ? The idea is to get help to know the next attribute.

Hi all..passed the exam with a good mark
All questions from dumps
You can contact me via what’s up on to get the dump.
https://docs.google.com/document/d/1XniNgZzT7YYTj5ewF_qitTt4SZnXbtf4p-jm6DYHGjg/edit

@boder

I prepare as well for this exam but I don’t use dumps until my final review. I study 3.5 months then 2 weeks for review before taking exam. Exam is really hard without dumps. There’s no shortcut in learning networking and skills are what matter most. I agree that paper without knowledge is no no.

did any one clear today –?? please share is there any drag and drop in exam ??

no drag and drop in prince 91q- V1 , are they coming in exam ??

@kevin please do not try to do business here

Hi,

Alhamdulillah,

I have passed the exam today. Guys exam is very easy study well I got 980/1000

PBR,EIGRP STUB,EIGRB Eval and DNDS

Move to CCNP Switch😃😃

@safeer

Did Jazzy 477 and Prince 91 you study ?? please share you experience

anyone knows how often questions change? When was the last change?

@Anonymous,

you’re wrong. You have to read the question.
Which command do you enter to filter only routing updates that are sent through interface
GigabitEthernet0/0?
We don’t want to prevent update but to FILTER them.
You said on you comment :
To control the advertising and processing of routes in routing updates, use the distribute-list command.

For me, it’s F

@Safeer

did you see any new questions ?

Also, is prince 91 enough to go through (ofcourse 477 for DnD/ Sims) ?

Who is buying vce player and vce 300-101 exam at 15 dollars.

@safeer

Did Jazzy 477 and Prince 91 you study ?? please share you experience please please

PLEASE ANY ONE HELP TO SHARE THE LATEST SOFTWARE FOR OPENING VCE FILES.

Passed Today with 8xx. Everything as above mentioned (lab, dnd, dump) BUT 7-8 new questions.

Here some of them:

What…show ip flow export?
– top talkers
– export interface config
– local status & statistics
– sent status & statistics

What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
– ARP
– ICMP
– IGMP

Router IOS connected Windows syslog server do not function. What is the reason?
– firewall is blocking … UDP port 514
– firewall is blocking … IP prot num 514
– firewall is blocking … TCP port 514
– firewall is blocking … UDP port 512

What … snmp-server enable traps & snmp-server host 192… traps version 2c public …?
– to allow …192.. to access syslog…
– to collect info about system network management
– to allow private communication between router & host
– to disable all SNMP info on the system

BGP topology and configuration: Why fails eBGP neighbor?
– config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config

Bye

omg new questions?!

What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
– ARP
– ICMP
– IGMP

Answer ARP

Router IOS connected Windows syslog server do not function. What is the reason?
– firewall is blocking … UDP port 514
– firewall is blocking … IP prot num 514
– firewall is blocking … TCP port 514
– firewall is blocking … UDP port 512

Answer – firewall is blocking … UDP port 514

What…show ip flow export?
– top talkers
– export interface config
– local status & statistics
– sent status & statistics

The question is not clear :(
Router# show ip flow export
Flow export v5 is enabled for main cache
Exporting flows to 10.1.1.1 (2055)
Exporting using source interface FastEthernet0/2
Version 5 flow records
39676332 flows exported in 1440719 udp datagrams
0 flows failed due to lack of export packet
153 export packets were sent up to process level
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures

I’ve lost my mind. I did everything correctly. All the questions were from prince and Jazzy. It was super easy. Idk what happened to be honest. I finished an hour before my exam finish time.
WTF. Is there anyway I contact Cisco so they can check my result? I was 100% I could have pass this exam.

@Mas
You can use this link… (https:// ciscocert.secure.force.com/ english/ apex/ MainPage )
Just remove spaces. In the upper middle location of the page you will see “Contact Sertification support”…click on it and log (you have to do a registration if you don’t have-it is quick), after that you can raise a ticket for review.
After a couple of days you will receive answer or at least someone will join for the discussion.

@Network_Engineer
Thank you :).

@Mas which exact dump version you followed for exam , please share thanks in advance

@safeer

please share your dumps,

What … snmp-server enable traps & snmp-server host 192… traps version 2c public …?
– to allow …192.. to access syslog…
– to collect info about system network management
– to allow private communication between router & host
– to disable all SNMP info on the system

IMHO, – to collect info about system network management … but the question is not clear..

Question 203 – 477qV31

Which configuration can you apply to a device so that it always blocks outbound web traffic on Saturdays and Sundays between the hours of 1:00 AM and 11:59 PM?

Answer C is not the correct option since time is 11:59 PM which would be 23:59 in the configuration. Since questions refers to outbout web traffic, the only option that has the ACL applied in egress is option A, even though it says UDP port 80 (which is not Web traffic). A correct configuration for this question would be:

time-range SATSUN periodic saturday sunday 1:00 to 23:59
access-list 102 deny tcp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
access-list 102 permit ip any any
interface vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 out

Anyways, the correct answer should be option A instead of C

@ Safeer, what do you mean by DNDS lab, thanks

Sorry figured it out Drag and drops, never mind.. thanks

Which free program do you guys use to open vce files?

@cisconinja you can use VCE player to run vce files

@mala which dumos you follow on this site ?

@tam
mala is selling I reached out

@MAS
what is your result breakdown?

Did you mess up the lab?

BGP topology and configuration: Why fails eBGP neighbor?
– config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config
============
* config update-source…

BGP topology and configuration: Why fails eBGP neighbor?
– config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config

https://www.relativeflow.com/post/ebgp-multihop-options/
https://supportforums.cisco.com/t5/wan-routing-and-switching/ebgp-multihop-command-only-applies-to-loopbacks/td-p/2030331

should study 477 or not — just planing to go with prince 91 and 477 DND — any suggestion

I passed today with 8XX . Exam is easy, dont worry. Cca 40 of 45 questions from 91q Prince, 5x DND – some new DND’s not seen in Jazzy, and EIGRP stub,EIGRP evaluation, PBR labs.
Study hard and good luck

@SKipi
Why not 9XX? What was wrong?

@Skipi congrats mate

@doka,

he said some new DND’s – that’s probably why

@Skipi : do you remember your DND ?
Others said :
6 DNDs: DHCP, adverse network conditions, AAA, Frame-relay component and LMO, TACACS+ACL

Yours ?

@Anonymous , u r right , also syntax is wrong in the choice
f (distribute-list 1 GigabitEthernet0/0 out ) the right syntax should be (distribute-list 1 out GigabitEthernet0/0 ) ,

so the right one is C. R1(config-router)#passive-interface GigabitEthernet0/0 , other choices are wrong as we have to enter that command under config-router mode with specific interface name .