Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Oh ! Good point tt !
I didn’t notice the wrong syntax in F.
Maybe is the syntax in DUMP wrong, but not in the exam? :)
can u guys confirm with me with QUESTION 34 ,,
answer : A. The summary route is in the global routing table or B. The wildcard bit in network command is incorrect ,, and ur explanation ..
In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates
are received by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site
B. Create separate address families.
C. Disable split horizon.
D. Use sub interfaces.
E. Disable EIGRP auto summary.
is it C & D OR A & C please ?
I believe C&D
Hi Everyone
I passed my ROUTE exam.
Lots of questions here plus a couple new ones.
Guys we need to update the 91Q by collecting new questions from here.
can some one put all new question together here in on single comment
I passed today, 8xx! Jazzy DnDs and Prince 91Q are still valid.
got 2 sims, PBR and EIGRP Stub.
I am going to get some beer now!
@JazzyPrinceTY congrats bro what all new question you get remember any ?
@SKipi
Have you come to this site to misguide us??
@TAM I had the BGP topology and configuration question as above, a new question about sh ip flow export, the rest are on Prince91Q
The “show ip flow export” command is used to display the “status and the statistics” for NetFlow accounting data
export, including the main cache and all other enabled caches. An example of the output of this command is
shown below:
Router# show ip flow export
Flow export v5 is enabled for main cache
Exporting flows to 10.51.12.4 (9991) 10.1.97.50 (9111)
Exporting using source IP address 10.1.97.17
Version 5 flow records
11 flows exported in 8 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
0 export packets were dropped enqueuing for the RP
0 export packets were dropped due to IPC rate limiting
0 export packets were dropped due to output drops
The “output drops” line indicates the total number of export packets that were dropped because the send queue
was full while the packet was being transmitted.
@Dumps ok than b happy forever
Hi my name is Anus. I still want to know how to study?
@Anus how much exp you have ?
hi all any comment, I will take exam tomorrow!
@KA diot go for last minute on different Dumbs — be very solid with SIM as those will get you high score
GUYS, please share if any one clear today NEW QUESTION SO FAR
Which two conditions can cause BGP neighbor establishment to fail? (Choose two)
A. There is an access list blocking all TCP traffic between the two BGP neighbors.
B. The IBGP neighbor is not directly connected.
C. BGP synchronization is enabled in a transit autonomous system with fully-meshed IBGP neighbors.
D. The BGP update interval is different between the two BGP neighbors.
E. The BGP neighbor is referencing an incorrect autonomous system number in its neighbor statement.
Answer: A E
What…show ip flow export?
– top talkers
– export interface config
– local status & statistics
– sent status & statistics
What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
– ARP — Ans
– ICMP
– IGMP
Router IOS connected Windows syslog server do not function. What is the reason?
– firewall is blocking … UDP port 514 – Ans
– firewall is blocking … IP prot num 514
– firewall is blocking … TCP port 514
– firewall is blocking … UDP port 512
What … snmp-server enable traps & snmp-server host 192… traps version 2c public …?
– to allow …192.. to access syslog…
– to collect info about system network management
– to allow private communication between router & host
– to disable all SNMP info on the system
BGP topology and configuration: Why fails eBGP neighbor?
– config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config
hekeksad
Dear All,
alhamdulliah, pass the exam with 9xx/1000, jazzy and prince 91 are still valid,
Lab: Eigrp, OSPF and EIGRP Eval,
only 4-5 questions are not form dumps.
Best of luck to you, Moving to switch…. :)
All ioterfaces io each riuter are partcipatog io the EIGRP 100 pricess. Ioterface Liipback 2 io HQR2
is curreotly io shutdiwo mide. Ao eogioeer issues the eigrp stub cimmaod io riuter BR1. Which
statemeots abiut the query messages seot frim riuter HQ-R2 fir a riute ti reach the
12.12.12.12/32 oetwirk is true?
A. Riuter HQ-R2 seods a query message ti the feasible successir fir a riute ti 12.12.12.12/32
oetwirk.
B. BR1 receives query messages frim HQ-R2 fir a riute ti 12.12.12.12/32 oetwirk.
C. Riuter HQ-R1 receives query messages frim HQ-R2 fir a riute ti 12.12.12.12/32 oetwirk.
D. Riuter HQ-R1 aod BR1 receives query messages frim HQ-R2 fir a riute ti 12.12.12/32 oetwirk.
whats the correct answer and why
Please answer above , at its confusing in Jazy answer is C but most of the other site says D . which i guess true because in stub router wont query itself but will query to both the peer routers Any suggestion ??
ANSWER is C 100 % Correct
The stub router DO NOT ACCEPT Queries and Non stub routers Do NOT send quires to Stub Router in EIGRP
Read the Cert Guide 300-101 to understand concept
EIGRP Stub router advesrtise connected and summary so all routes including loopbacks and serials interfaces will be adverticed to all in EIGRP domain
Hello all l need ccna security dumps where can l find? also there is like site ? pls share information to me thanks all
my gmail is ( endstep1atgmail.com )
oh my bad , i got it got puzzeled with name but ay way @Someone17 thanks you so much for reponse.
Any 1 clear exam today ?? please share exp
Can any one send me the price 91Q dumps pls
nitish(dot)3008 @ gmail(dot)com
in real exam do tab or ? works or need to memories the command any idea
router eigrp 65553
no auto-summary
network 10.0.0.0 0.0.0.255
router ospf 1
network 192.168.5.0 0.0..0.255 area 0
passive-interface loopback0
redistribute eigrp 6553
If this configuration is applied to a device that redistributes EIGRP routes into OSPF. which two
statements about the behavior of the device are true? (Choose two).
A. EIGRP routes appears in the routing table as E2 OSPF routes
B. The device router ID is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears in the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF
F. EIGRP routes appears as type 3 LSAs in the OSPF database.
is it going to be AE or CE please ?
exam today failed, had by1% :(
– PBR
– EIGRP STUB
– EIGRB Eval
– DNDS – a few new ones iv not seen
the syslog firewall question, but i didn’t revise it :(
@the boy bad luck sorry to hear but only 1 question because of you get failed … how many question you get from 91Q ?
@boy also do you remember any new DND ?
@please share i have exam today too .. if you remember anything on Drag n Drop
Router IOS connected Windows syslog server do not function. What is the reason?
– firewall is blocking … UDP port 514 <– Correct Answer
– firewall is blocking … IP prot num 514
– firewall is blocking … TCP port 514
– firewall is blocking … UDP port 512
New D&Ds
IPsec : protocol used to secure tunnels.
Keepalive : used to keep other side if tunnel interface up with local side is up
mGRE : Protocol to connect multiple destinations
MSS : amount of data that a device can handle as unfragmented piece
tunnel key : used to authenticate connection
DLCI : A locally significant ID
FECN : An indicator of congestion on the network
LMI : A signalling mechanism for Frame Relay devices
PVC : A logical connection comprising two endpoints and a CIR
SVC : A circuit that provides temporary on-demand connections between DTEs
1. DHCP Relay information
ip dhcp relay information option –> add suboption and the remote ID suboption
ip dhcp relay information check –> Verify relay information option (in forwarded BOOTREPLY)
ip dhcp relay information policy …… –> Define reforwarding rules (for a DHCP relay agent)
ip dhcp relay information subscriber-id –> enable a service provider to add a unique ID
ip dhcp relay information –> configured in global configuration mode applies to all interfaces
excessive unicast floading—–> condition aused by ….
out of order ——-> Potential result of diabling fifo
tcp starvation ——>potential effect of excessive udp traffic on the lik
asymetric routing ——>Cause of inconsistent traffic pattern
latency——–>condition in witch packets require and excessif length of time
AND FR Multipoint configuration
nterface Serial0/0
no ip address
encapsulation frame-relay
interface Serial0/0.123 multipoint
ip address x.x.x.x 255.255.255.0
frame-relay map ip x.x.x.x 102 broadcast
@doka1 above all DND are in Jazzy , than how come they are new ? sorry not to disrespect you but just wondering
@mdhi scammer
Hi all,
I passed exam with 8XX today.
Labs are same as the others : EIGRP Eval, EIGRP Stub & summary, PBR
DND : DHCP Relay (Carreful ! New one. Definitions are rephrased), adverse network conditions, AAA, Frame-relay LMI, GRE Features.
few news questions that are already posted here.
Good luck
please anyone can share with me the exam simulator vce
@Metal
What you mean by “few news questions that are already posted here” where is it?
@Metal Congrats! what dumps did u used? is the 91q jazzy dumps still valid?
in regards to how many questions where from p91 about 80%
i also had both thes DND but the dhcp relay one i didnt have a clue
IPsec : protocol used to secure tunnels.
Keepalive : used to keep other side if tunnel interface up with local side is up
mGRE : Protocol to connect multiple destinations
MSS : amount of data that a device can handle as unfragmented piece
tunnel key : used to authenticate connection
1. DHCP Relay information
ip dhcp relay information option –> add suboption and the remote ID suboption
ip dhcp relay information check –> Verify relay information option (in forwarded BOOTREPLY)
ip dhcp relay information policy …… –> Define reforwarding rules (for a DHCP relay agent)
ip dhcp relay information subscriber-id –> enable a service provider to add a unique ID
ip dhcp relay information –> configured in global configuration mode applies to all interfaces
@Mustafa : scroll above … and read ;)
@Mac : yes I used this one and is still valid. Carefull, there is a mistake in anwer DnD AAA in this dump. They inverted accounting and authorization.
91 q still valid but only 80% , the questing which were not in dumps was little tricky as for even one of the drag n drop they change the style of asking question any way I have cleared it with 8XX will update you more once will have my brewed coffee cheers
91 q still valid but only 80% , the questing which were not in dumps was little tricky as for even one of the drag n drop they change the style of asking question any way I have cleared it with 8XX will update you more once will have my brewed coffee cheers
@Anonymous what were the labs?
Labs were Eigrp stub and summary, eigrp sim , ospf sim