Share your ROUTE v2.0 Experience

It seems that every July they update the exam. It happened with Switch exam last year. I barely passed. And now with Route they changed a lot of questions again

failed with 77X , my heart is crying , all most all quiz is changed , and only labs are same

I would not trust the users with “quitz”. Already 3 with the same wording

I failed the exam today but confirmed that kikavich all in one is very valid
Same lab same dnd same que . 5 to 6 new que that I don’t remember sorry for that.

@CCNP-Exam
Falled with only 5-6 new questions??

@Boombaig
Sorry to hear about you. Will you explain little bit that which dumps did you follow?

I stuffed up on 2 labs 1. Could not be summarised 2 subsets and 2. Made a mistake in OSPF LAB SIM

@CCNP-Exam
Sorry to hear about you as well. Were those new questions completely different what we have new questions on this forum? And do you remember any of those?

@CCNP-Exam
Why couldn’t you summarize to two subnets?
Didn’t you use command on the interface as ip summary-address eigrp 123 10.2.0.0 255.255.0.0

Please attension with the OSPF SIM!
“There’s a new OSPF SIM where they ask you to use “OSPF 37” and configure it on all 3 routers, LA, Indianapolis and Atlanta. Cisco is tricking candidates by setting them to fail as questions/trouble-shooting to get this SIM to work is very complex if you do not know what you are doing. I fixed it though. However, it is a new question.”

@doka
Could you please send that simlet to my email address: nazeerf7 at gmaildotcom. If that is possible for you.

Thanks

MORE:

Pass Leader 300-115 dumps FYI:

drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

(808q NEW VERSION UPDATED in JULY/2018!!!)

(p.s. Copy the upper link and open it in your browser.)

Hello azhar, congrats, do you remember the new framerelay dnd ? thank you

@Ghauri
I was so tensed that I forgot how to configure it. I got one que regarding the use of xor , or , and , true, false.

In ospf sim router names were changed with new set of ip 192.168.23.4/30 and ospf 80

@CCNP-Exam
Thanks for the update though and hoping for you to pass next time. :)

@vgg
azhar is a seller don’t listen to them.

@CCNP-Exam

Can you please give more information of the ospf sim.if u remember the command. please share

@doka
Where can I find this sim?

@doka
Where can I find this sim you are talking about?

I have a “standard” OSPF-SIM, not new

updated ALL IN ONE v1.0 vce file
add new NEW QUESTION 121 “ALL IN ONE” v1.0 vce file

1. QUESTION 442

2. NEW QUESTION 121

3. DRAG & DROP – 31

4. EIGRP & OSPF Simlets – 8

ALL IN ONE_v1.0

thanks @doka
https : // drive. google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

@CCNP-Exam

Router names and ip addresses would definitely not be the same in the names you see in the dumps. Its different in the exams that why you are told to know the concept because you’ll see different names and ip addresses in the real exam. sorry about your exam

@CCNP-Exam
Sorry about that though but how come you failed. if you studied the kikavich all in one and you confirm that it is still valid then how did u fail? Did you freeze during the exam? so sorry. Please let us know what happened because you have been very active on this site.

@Anonymous
Yes I was overload with studies and stressed. I was more focused on new que rather than labs. It was close though 75x. I will sure I pass next time.

@Anonymous
A user says, we must configure all 3 routers in OSPF-SIM

Hi @doka

updated new vce ALL IN ONE_v1.0

drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

1. QUESTION 442
2. NEW QUESTION 121
3. DRAG & DROP – 31
4. EIGRP & OSPF Simlets – 8

@doka
so you are saying that the sim is same ospf but we have to configure all the three routers.
Before we configure only portland and amani, now Lynaic as well.

@doka
Following are the configuration before solution. Can you point out which configuration has to be done extra other than the solution in all the three routers?

Portland
.
.

password encryption aes
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0
ip address 192.168.4.5 255.255.255.252
clock rate 2000000
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
clock rate 2000000
!
!
!
ip http server
no ip http secure-server
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
login
_______________
Amani:
hostname Amani
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$3s50$UxMXM0mr6klbwtk.i.2Us/
!
no aaa new-model
!
resource policy
!
memory-size iomem 5
ip cef
!

!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0
ip address 192.168.72.6 255.255.255.252
clock rate 2000000
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
ip address 192.168.4.6 255.255.255.252
clock rate 2000000
!
router ospf 1
log-adjacency-changes
network 192.168.72.4 0.0.0.3 area 0
!
!
ip http server
no ip http secure-server
!

control-plane

!
line con 0
line aux 0
line vty 0 4
login
!
!
end
___________
Lynaic:
hostname Lynaic
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$3jv6$nMXU8vdTFO2j5gLqbeqWL/
!
no aaa new-model
!
resource policy
!
memory-size iomem 5
ip cef
!
interface Loopback0
ip address 10.239.239.239 255.255.255.255
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0
ip address 192.168.72.5 255.255.255.252
clock rate 2000000
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
clock rate 2000000
!
router ospf 1
log-adjacency-changes
network 10.239.239.0 0.0.0.255 area 2
network 192.168.72.4 0.0.0.3 area 0
!
!
ip http server
no ip http secure-server

!
control-plane
!
line con 0
line aux 0
line vty 0 4
login
!
!

@Ghauri
Yes, I understood it that way..

Please help with this question :
Where is the best place to position a NetFlow server?

A. Core edge
B. Access edge
C. WAN edge
D. Distribution edge
E. User edge

Hi, nneettwwrrookkiinnggg
Thanks a lot!! :)

It is C

@ccnp-exam
What do u say about ospf lab? Do we have to configure all three routers? Is that right?

Thank you !

@CCNP-exam

Sorry to hear that you just barely failed brother.
Did you have the some of the same question that I posted?

Alhm..passed 300-101 with 85x today..
Nearly 30-40% questions other than simulations and DND are not included in TUT /Kikavich .
Pls prepare carefully..Good luck Guys..

@Hrs
Congrats!
Any details please! :)

Can someone please explain why we need to use F and not C ??

Which command do you enter to filter only routing updates that are sent through interface GigabitEthernet0/0?

A. R1(config-if)#passive-interface GigabitEthernet0/0.
B. R1(config-router)#no passive-interface GigabitEthernet0/0
C. R1(config-router)#passive-interface GigabitEthernet0/0
D. R1(config-router)passive-interface default
E. R1(config-if)#passive-interface default
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out

@HRS
Are labs the same?

@Hrs
Congrats! how about the new questions from this forum, did you study them too and still 30-40% questions were different? please comment. thanks

@Overdose
Answer C
“Using the passive interface command can prevent routers from sending routing updates through a router interface. Keeping routing update messages from being sent through a router interface prevents other systems on that network from learning about routes dynamically. For examples using the passive interface command, see the “Passive Interface Examples” section in Configuring IP Routing Protocol-Independent Features.

For RIP and IGRP, the passive interface command stops the router from sending updates to a particular neighbor, but the router continues to listen and use routing updates from that neighbor; however, on EIGRP, the passive interface command affects the protocol differently, as explained in How Does the Passive Interface Feature Work in EIGRP?

“Controlling the Processing and Advertising of Routes in Routing Updates”

To control the advertising and processing of routes in routing updates, use the distribute-list command. There are two distribute-list commands: distribute-list in and distribute-list out. They are similar in syntax, but the options available to each and their behavior are very different.”
Reference: https://www.cisco.com/c/en/us/support/docs/ip/interior-gateway-routing-protocol-igrp/9105-34.html

@Overdose, completing the answer of @doka you don’t have any info about the ACL referenced in the distribute-list (1 in this case) so “C” is the better answer.

i failed the exam 300-101 last friday 13 july. i used a pass4sure mostly of questions are in there. Use the Q&A that share nneettwwrrookkiinnggg the new question that came, are added in that dump qs. (EVN, SECURITY, FRAME RELAY, DHCPv6)

https://drive.google.com/drive/folders/1xybTeh2Lck2FcKxGzhAPF4oq70N__n_r
(PASS4SURE) the one that i used. Also study the one shared by nneettwwrrookkiinnggg

@Anonymous sorry :( bro

I want to make a valid vce and pdf file for the exam. if you give new question I can add all-in-one_v1.0 vce and pdf. I am working abouth drag and drop real simulation

Lab simulations and DND are same.
But 30-40 % questions not included in updated questions aswell and are new. Pls make the concepts clear.
I Suggest to read the official route guide to get good understanding of tue concepts ..u can download it for free from Google.

so close nneettwwoorrkkiinnggg. I will try again on July 30.

Actually, there’s one drag and drop that came but is already added on the vce.

address registration
global addressing
multicasting
simple flow control
virtual circuit status messages

If I remember another one i will posted, thanks a lot

@DTT
This DnD is from digitaltut.

@@hrs
u mean to say that new questions which we have been collecting from commentt section plus kikavich all in one pdf are not enough to pass the exam?

One new question about best place to position a netflow server
A. core edge
B. access edge
C. WAN edge
D. Distribution edge
E. User edge

whats the answer?