Share your ROUTE v2.0 Experience

Guys, I know I am asking the same question but can you please provide the links to .vce files for kikavich and all other questions?
I would really appreciate if someone could sent me via email as well ?
jabraham59@yahoo. com

Hello People, I started studying some time ago so I analyze the “jazzy” dump and the “477q – correctedv31”. Do the kikavich dump its just an extension of those dumps and “ONLY NEW Q NOT INCLUDED IN 477” dump are the questions to fill the gap? Did someone check that or I must do it myself? :(

https://drive.google.com/open?id=1rIdRqBBCUJFc-DkPuS7lUROZTcY0sLLZ

route materials that will support for ur studies..Best of luck

@nneettwwoorrkkiinngg
I dont suppose you could please share the designer password please?
I like to break the exam down into areas in designer

@DigitalTut Please help. I have already bought the membership . But im unable to log in.

In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
For me is the correct answer A. Also WITHOUT OPTIONALLY FEATURES!

@Doka

In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP

For me, the correct answer is D.
Reason: Asymmetric Routing occurs when packets are sent over redundant links and at the destination, they arrive out of order.

*Virtual Router Redundancy Protocol (VRRP) is a computer networking protocol that provides for automatic assignment of available Internet Protocol (IP) routers to participating hosts

I could be wrong.

So Kikavich is not valid anymore?
Seems like lots of new questions added this month

@Zam2u
Yes correct answer is A.

I mean D, sorry

i’ve collated a vce file of the new questions this past july that were discussed starting pages 158-present. these are new questions that were not on the previous kikavich june 477q, kikavich all in one, 31dnd, 87 new q, 67 prince.

July Collated 35qs:
https : //mega.nz/ #!RI5XnThb!bq3KPPx8p6 M4T9uVjV4wfsZ0lLyWSQzRaidLCZ5mc-w
(please remove the spaces)

credits to our active contributors here on this thread.

note: answers were as discussed here. I got the best answers from with references posted. also, i’ve scanned these questions and they were included on nneettwwrrookkiinnggg’s updated all in one 121q section. so if you are troubled and just want to review these new questions and are done with the previous kikavich’s all in one dumps, you can proceed to studying this 35 new q.

＠raden
could you copy paste them here please?

Thanks Raden. I’m preparing for my exam this coming Saturday July 21st so hoping and praying that I could pass. Will share what went out to my exams

@Raden

Doesn’t open on VCE. Can you share the document instead.

@mumo
best place to position a netflow server
A. core edge
B. access edge
C. WAN edge
D. Distribution edge
E. User edge
Seems to be C – WAN edge.
https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-netflow/prod_white_paper0900aecd80406232.html

i’m pretty sure i’ve submitted a comment already but lemme post this again
@bonsai, you can find the discussion on the new questions from pages 155-165 in this thread, they’ve corrected some answers there which i have updated on my vce file too.
@sakote, i use vce1.1.2, nneettwwrrookkiinnggg’s link on the previous page provides an installer.

here’s the link for the doc file i used:
mega.nz/#!FQo3iQJR!bwPLgsko6Yme8PbQLrvOIuT3kPhV-J7OA3ZE4hN0z7U

@sakote, goodluck on the exam btw, i’m also bound this coming 20th.
wanna study new qs as much as i can and check reference sites.

also, if some kind soul can provide the new dnd already (CoPP and MPP) which they were discussing few pages back, we’ll be grateful

1. Which purpose of the AAA accounting feature is true when you use TACACS+ authentication ?
a. It prompts users to change their passwords when they expire
b. it saves a timestamped record of user activity
c. it controls the activities that the user is permitted to perform
d. it verifies the user identity.
Ans: D

I think the answer is C?
“The AAA accounting feature allows the services that users are accessing and the amount of network resources that users are consuming to be tracked”

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_aaa/configuration/15-sy/sec-usr-aaa-15-sy-book/sec-cfg-accountg.pdf

Thanks Raden. Goodluck to us both

@bonsai
there has been a discussion regarding that q at page 161-162, in which also includes C on the list of the correct answers if you specified the question. it was a single answer multiple choice.

heres an explanation by DataRT way back p162
@ Marco:

If you assume the question was referring to accounting, then you should assume same for authorization as both accounting and authorization features are activated after a user is authenticated. This means you can as well choose option C (it controls the activities that the user is permitted to perform), an authorization feature, as one answer too.

Since the question wasn’t specific as per a particular AAA feature, you should go with authentication: “it verifies the user identity.”

scanning back a few changes, i’ve made revisions on some items,
re up vce file
mega.nz/#!ddRXRawL!Hj3LzqVwqo3Rub529nuw9LvjHxp7KESESQL5z4v6zN0

@raden what version that you used to open this vce?? because i can’t open it..

@Zam2u @doka
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
The answer must be A. For D, VRRP has only one master (active) router at any given time. C also has one active device without a failure.

A network access serve using TACACAS+ for AAA operations receives an error message from the TACACS+ server. which action does the network access server take next ?
a. It attempts to authenticate the user against RADIUS
b. It restarts and attempts to reconnect to the TACACS+ server
c. It rejects the user access request the
d. It checks the method list for an additional AAA option
Answer is not C but D :
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_aaa/configuration/xe-3s/sec-usr-aaa-xe-3s-book/sec-cfg-accountg.html

@Tak

Did you read the official cert guide? It is clearly D.

@Bonsai
Read Official Cert Guide p.27. It is obviously D. My fault. Many thanks.

@lolo

I agree it seems like D is the best answer based on the document you found.

@mumo

This is difficult.

https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-netflow/prod_white_paper0900aecd80406232.html

From this I would say A but I’m not confident

@raden

Thank you for your contribution to this blog. Would you please share the PDF version of the vce file.
Thank you in advance.

How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP Port
B. Specify a different UDP port.
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Correct Answer: C

Isn’t the answer for this B?
https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/12s_mdnf.html

@Bonsai
Correct, is B

Pass the exam 87X
LABS : EIGRP STUB SIM, OSPF SIM and EIGRP OSPF Redistribute
Drag and Drop : new one about mGre, Loose/strict mode, ACL and Frame relay LMI

Some new questions i’ve never saw. Some question come from new file (tentative new)

Good luck !

@olo
Congratulations!
which dumps did you study?

Which purpose of the AAA accounting feature is true when you use TACACS+ authentication ?
a. It prompts users to change their passwords when they expire
b. it saves a timestamped record of user activity
c. it controls the activities that the user is permitted to perform
d. it verifies the user identity.

Answer is B 100% sure
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010101000.html

https://www.cisco.com/c/dam/en/us/td/i/200001-300000/210001-220000/210001-211000/210892.tif/_jcr_content/renditions/210892.jpg

D is NOT correct because:
“Authentication—The process of verifying users when they attempt to log into the controller. “

@lolo
Congrats, do you remember the new mGre DD ? thank you

@lolo
Congrats. What new file are you talking about? what dumps did you study for the exam. Thank you

Why are we still discussing this question?

Which purpose of the AAA accounting feature is true when you use TACACS+ authentication ?
a. It prompts users to change their passwords when they expire
b. it saves a timestamped record of user activity
c. it controls the activities that the user is permitted to perform
d. it verifies the user identity.

Answer is B as doka says.

Ignore anyone who says otherwise. It’s likely that English is not their first language and they don’t understand the question. It is asking about the Accounting feature. None of the other options have anything to do with Accounting.

Q48. Which command sequence can you enter on a router to configure Unicast Reverse Path forwarding in loose mode?

a. Interface GigabitEthernet0/0
Ip verify unicast source reachable-via any
b. Interface GigabitEthernet0/0
Ip verify unicast source reachable-via loose
c. Interface GigabitEthernet0/0
Ip verify unicast source reachable-via all
d. Interface GigabitEthernet0/0
Ip verify unicast source reachable-via rx

Answer: ??

@all:

Sorry, I take back my previous comment; in fact, I didn’t notice the question was referring to the AAA accounting feature and not authentication. The question was a bit confusing!

Answer: B (100%)

@all:

Sorry, I take back my previous comment; in fact, I didn’t notice the question was referring to the AAA accounting feature and not authentication. The question was a bit confusing!

Answer: B (100%)

@Zam2u: The answer is A

a. Interface GigabitEthernet0/0
Ip verify unicast source reachable-via any

@DataRT , Thanks !

Hi Guys,

I added 30 more questions to Raden’s New Tentative Document file from the comments I gathered.

Please go through them and let me know if any answer is incorrect.

Link:

drive . google . com / file / d / 1zXkkzekMNMcX1MB_RetqnV9DNAlNe78S

Please remove spaces.

I have my exam tomorrow – Plz pray for me. Thanks

Zam2u
20. Which feature is supported with stateful NAT64 ?
a. IP multicast
b. NAT44 and NAT64 on the same interface
c. VFR
d. FTP and ICMP on an application layer gateway
Answer C

27. Which is minimum level for which user can see full commands but can’t change anything?
A: 0
B: 1
C: 14
D: 15
E: 16
Answer B

31. OSPF has R1 router ID 172.18.1.1 . What happens when R1 configure with a new loopback interface IP address 172.17.1.1 ?
a. OSPF chooses 172.17.1.1 as new router ID when R1 is rebooted.
b. OSPF chooses 192.168.21.0 as new router ID when apply new configuration.
c. OSPF chooses 172.17.1.1 as new router ID when apply new configuration.
d. OSPF retains 172.18.1.1 as router ID until interface on which is configured goes down
Answer A

35. which protocol use both best path and second best path for traffic?
a. eigrp
b. ospf
c. bgp
d. rip
Answer: A

Q38. Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key role over to work correctly?
A. SMTP
B. SNMP
C. Password
D. Time
Answer: D
Not so sure about this..

Q54.Which feature is supported with stateful NAT64 ?
a. IP multicast
b. NAT44 and NAT64 on the same interface
c. VRF
d. FTP and ICMP on an application layer gateway
The question is maybe incorrect..

The answer is D for Q31.

Highest loopback IP address is selected as router-id IF there is no router id set using the “router-id x.x.x.x” command.

In this case, it doesn’t say if 172.18.1.1 was selected as Router ID because it was a loopback interface’s IP or if it was set using the “router-id”. Regardless, 172.18.1.1 will always beat 172.17.1.1.