Share your ROUTE v2.0 Experience

QUESTION 453

Router# show ntp associations Address ref clock st when poll reach delay offset disp
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 4 69 128 377 4.1 3.48 2.3 #~192.168.13.57 192.168.1.111 3 32 128 376 7.9 11.18 3.6
* Master (synced), # master (unsynced), + selected, candidate, ~ configured

Which of the following is true?
A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets
D. All NTP packets are droped

Is it B or C? For me it is B. But according to nneettwwoorrkkiinngg it is C?

Reference: https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-110/15171-ntpassoc.html

Thanks for your feedback. 10 points away is really unlucky brother.
Take the exam again next week and pass

@Anam
sorry for you :(
Can you share your questions here? (Networking dumps)

@Bonsai,
I will most definitely be taking it again in 6 days.

@Very hard working,
All questions were from the nneettwwoorrkkiinngg dump

@Anam

May you say which questions? Lets summarize the dump with your help.

Thank you anam

Anam turk musun?

@Anam

labs = Is OSPF lab ospf v6?

yes OSPF sim, not the OSPFv3

https://www.digitaltut.com/route-ospf-sim

can anybody say how many questions will be in CCNP Route Exam at all how many d&d how many MCQ’s how many sims how many lab??????????????

@abas

All Q60 (3-5 DnD + MCQ)
and
Labs = 3

@abas,
I took the test this AM and had 53 questions

46 MCQ
3 LAB – EIGRP stub, EIGRP-OSPF redis, OSPF Sim
4 DND – Frame Relay extensions, GRE features, uRPF, ACL types

@ Anam

How many new mcq in your test ?
Any changes in LABs ?

Pl tell… My exam after 12 hours…

can any body share any dumps here for ccnp route please or send me in my email.
abbas.quraishi789 @ gmail dot com

QUESTION 557
In which state do DR and BDR establish adjacency with each OSPF router in the network?

A. Init State
B. Exstart State
C. Exchange State
D. Loading State

Correct Answer: B

ExStart – In this state, the router and its neighbor establish a master/slave relationship and determine the initial DD sequence number in preparation for the exchange of Database Description packets. The neighbor with the highest Router ID becomes the master.

QUESTION 557
In which state do DR and BDR establish adjacency with each OSPF router in the network?

A. Init State
B. Exstart State
C. Exchange State
D. Loading State

Correct Answer: B

ExStart – In this state, the router and its neighbor establish a master/slave relationship and determine the initial DD sequence number in preparation for the exchange of Database Description packets. The neighbor with the highest Router ID becomes the master.

When the master/slave negotiation begins in the ExStart state, both neighbors will claim to be the master by sending an empty DD packet with the MS-bit set to one. The DD sequence number in these two packets will be set to the originating router’s idea of what the sequence number should be. The neighbor with the lower Router ID will become the slave and will reply with a DD packet in which the MS-bit is zero and the DD sequence number is set to the master’s sequence number. When the master/slave negotiation is completed, the neighbor state transitions to Exchange.

In the Exchange state, the neighbors synchronize their link-state databases by describing all entries in their respective link-state databases. The Database Summary List is populated with the headers of all LSAs in the router’s database; Database Description packets containing the listed LSA headers are sent to the neighbor.

If a router sees that its neighbor has a LSA that is not in its databases it will place the LSA on the Link State Request list. It then sends a Link State Request packet asking for a complete copy of the LSA in question.

@ANAM thanks ,

new update labs ; OSPV3,OSPD-EIGRP RED, EIGRP STUB,OSPF V6

:)

QUESTION 551
what are the two correct statements about enable secret and enable password command

A. the enable password command has a strong encryption algorithm than enable secret
B. if both commands are missing from the global configuration, vty lines use the console password
C. the enable secret command is backwards compatible with more versions of IOS D. the enable secret and enable password commands must be used together
E. the enable secret command overrides enable password

Correct Answer: CE
enable secret was included for backwards compatibility with some VERY OLD devices/IOS that did not support enable secret.

Any changes in LABs ?

Pl tell… My exam is 3 August

Thaks,
Regards

the Drag and Drop in the exame, in the exam, do you have to have the same order when it is not about indicating the sequence of commands? in the file of Networking dumps
if you do not put it in the same order that the give error and the aswer must be corret, since the sequence order is not indicate, true?

thanks,
regards

no changes in labs
@anonymous

I Had identified a question with a information maybe incorrect.

What is answer Correct to this question?

The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which
three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset

A C D or B C E

thanks @faouji :) :)

@Anam

May you share MCQ’s?

someone can answer the query regarding the order of the responses from DRANG & DROP??

Example:

LOSSE MODE:
-Supports using the default routers a route reference.
-Requires the source address to be routable.

STRICT MODE:
-Permit only packets that are received on the same interface…..
-able to drop legitimate traffic

is the same as…

LOSSE MODE:
-Requires the source address to be routable.
-Supports using the default routers a route reference.

STRICT MODE:
-able to drop legitimate traffic
-Permit only packets that are received on the same interface…..

both are correct right?
Cisco does not have that order in mind, right?

thanks,
regards

you sleep

This question should have B as the answer and not A:

Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?
A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers

Correct Answer: A

Refer to this link:

Refer to this link for question above:

learningnetwork.cisco.com/thread/12590

Exam tomorrow morning, getting nervous!

@ Ged
You’ll do good…hope you studied hard though and you went through nneettwwoorrkkiinngg dump. I’m sure you’ll come out smiling. Good luck and all the best.

@Curious

Ype, went through the Network Dump, gone through the DnDs and the labbs/sims. Hope I do ok!

Anyone know the password to the nneettwwoorrkkiinngg dump when trying to access it with VCE Designer?

Q169
Which two reasons for IP SLA tracking failure are likely true? (Choose Two)
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the RI LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong

Is this A and C? I’m confused

test

to All
to nneettwwoorrkkiinngg
your dump still valid (version 1.1 from 01.08.18)

I passed the exam.

DND Q606,604,583,578,564,565

3 Lab (OSPF sim, EIGRP Stub Sim, EIGRP OSPF Redistribution)

P.S. I’m taking questions.

P.S. I can answer all of your questions

only one new question about AAA databse

@kot and what about was AAA database questuion ? can you remember?

kot may you share your e-mail ?

Or send me a e-mail please ?

k2far4me at hotmail com

@kot
How many of your question were from here?
https://www.digitaltut.com/most-popular-questions

Thanks all guys,

I passed the exam 9xx.

nneettwwoorrkkiinngg your dump still valid.

DND – GRE feature,ACLs Type,Frame Relay LMI, uRPF.
3 Lab – OSPF sim, EIGRP Stub, EIGRP OSPF Redist.

i’m next to exam tshoot.

@ cyber
I’m sorry, I didn’t catch. (((
I remember that … the issue is quite simple.

@kot, what was the answer to the AAA database question?

@ Bonsai
about 30 percent

@ Olly
– TACAS AAA local database Authentication
– 6 choices (Choose two)
– AAA how and where the local DB are stored.

Hi @kot
Are ok the answer of sims for the exam?

QUESTION 557
In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
Correct Answer: B???????????

QUESTION 205
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose
Two)
A. area Id mismatch
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
Correct Answer: AD??????

Thanks girls!

Hello dear colleagues. paased on monday with score 9XX.
if we talk about questions i recommend to use dump created by nneettwwoorrkkiinngg. Dump is valid but i have max 5 new questions.
For LAB. Be carefull – ip addresses, interface name and type of interfaces can be differents.
Concepts is same but i had a diffrent intarface name, type, ip addresses, Area of OSPF procces

@Anton
Congrats…As with all Cisco exams: interface names, type, ip addresses, area of OSPF process will not be the same as in the dumps. Thanks a lot for your feedback.

Gys I have a problem
@nnnnetworrrrrkkkkk new questions seems some wrong answers can any body plz help me in this matter