Share your ROUTE v2.0 Experience

Passed today with 911/1000

3 Labs: EIGRP Stub, IPV6 OSPF Virtual Link ; EIGRP OSPF Redistribution

6 DNDs: DHCPv6(Q11), CoPP and MPP(Q1) , IPV6 Filters(Q4) , AAA(Q5), Frame-relay configuration (Q116) (Q21), TACACS/RADIUS – similar to (Q7)(Q12);
!!! new DND regarding EIGRP implementation IPV6

EIGRP stub
– config t working fine
– sumarization working fine to 10.2.0.0 255.255.0.0

EIGRP OSPF Redistribution
– show interface s/0/0/0 working fine
– show interface fa0/0 working fine

53 Questions
90% Questions from sections Questions
10% Brand new Questiosn never see anywhere ( EIGRP ; OSPF ; IPV6 related )

Study hard – Try to Understand not just memorize .
Learn and practice all sections from here and you will pass sucsesfully like me.

@nneettwwoorrkkiinng, where have you been bro?

Can you please share the latest and updated VCE.

Also can you tell me how to mix up the options please. Need your help. Exam is very soon in next week.

@nneettwwrrookkiinngg g — The vce you supplied is split into days and then new questions… I’m trying to figure out what sections to focus on — doing all 650ish questions seems impossible… my test is tomorrow PLEASE help. <3

@Tedy Congrats

Which dump you work with? Networking ??

can you communicate with me? veryyhardworking @ gmail.com

Hi @nneettwwoorrkkiinng,

Can you please share updated VCE please.

is there way to change the options ABCDE to mix answer?

Thanks man!

@ccnpboy

What VCE specifically did you use? the nneettwwrrookkiinngg g version?
How useful were the day 1 2 3 4 sections of his vce vs the new section on the test??

@ccnpboy

Hello, every one.

@Tedy
@very hard working
@Nasir

Could yours contact to me for share your experience about this exam, ccnp route 300-101.
email address alex ander petro sky @ yaho o.c o m

I want to take the exam ending this year 2018.

Guys,

any ideas on how to shuffle the options ?

@nneettwwrrookkiinngg, any ideas please. Also have you updated the vce file please?

Thanks

@Sammy
@Help me!
in the top menu go to *EXAM* *Options* then check the box that says “item order” and “Randomize choices where enabled”

@HelpingSammy,

Thanks.

do you have the latest vce and any tips on sims.

@Ccnpboy
What sections were most helpful from networkinggg’s VCE? Did the New questions section have most of the questions??

Many times I have seen this question with 2 different answers…. Any Ideas?

If you configure one router in your network with the auto-cost reference bandwidth 100
command, which effect on the data path is true?

A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.

nneettworking dumps says A.
Other dumps A, C
VCEguide C

? :((

Dear Delwans,

You have another dumps. then please send me my id – {email not allowed}

Please please.

Dear Delwans,

You have another dumps. then please send me my id – sahilshah42 at yahoo.com

Please please.

Passed today 9xx. Valid dumps from @nneettwwoorrkkiinngg! Majority are from New Questions.
DND: frame relay, gre, urpf, acl
Labs: eigrp stub, ospf stub and redistrib case 2.
53 qs, new question about AAA local database

Thank you @nneettwwoorrkkiinngg and @kikavich.

To all spammers, you are not helping, pls refrain from posting comments ln this thread. :)

@delwans

Correct answer is A. Default value is 100 for ospf auto-cost reference – refer to cisco documentation. What happens if you execute a default command which is already in use!? – it just does not take any effect.

@SCARLETT congrats,

could you communicate with me about the exam ?

veryyhardworking@ g mail.com

what are the two correct statements about enable secret and enable password command
A.the enable password command has a strong encryption algorithm than enable secret
B.if both commands are missing from the global configuration, vty lines use the console password
C.the enable secret command is backwards compatible with more versions of IOS
D.the enable secret and enable password commands must be used together
E.the enable secret command overrides enable password

Correct Answer: BE

Cisco IOS command reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/d1/sec-d1-cr-book/sec-cr-e1.html#wp3438133060

“If neither the enable password command or the enable secret command is configured, and if a line password is configured for the console, the console line password will serve as the enable password for all vty (Telnet and Secure Shell [SSH]) sessions. ”

Also:
“After you set a password using the enable secret command, a password set using the enable password command works only if the enable secret is disabled or an older version of Cisco IOS software is being used, such as when running an older rxboot image.” – this means that not all of the IOS versions supports “enable secret” command so it is not backward compatible.

Which command do you enter to filter only routing updates that are sent through interface GigabitEthernet0/0?

A. R1(config-if)#passive-interface GigabitEthernet0/0.
B. R1(config-router)#no passive-interface GigabitEthernet0/0
C. R1(config-router)#passive-interface GigabitEthernet0/0
D. R1(config-router)passive-interface default
E. R1(config-if)#passive-interface default
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out

Answer: C!!!!

Answer F is incorrect because of the syntax of the distribute-list command.

Reference:
https://www.cisco.com/c/en/us/td/docs/ios/iproute_pi/command/reference/iri_book/iri_pi1.html

“distribute-list {access-list-number | access-list-name} out [interface-name | routing-process | as-number] “

@Anonymous
Correct Answer =C,E
@Anonymous01
Correct Answer =F

very hard working

Can you provide some document which confirms your statement?

PS: Sorry, i saw at later point that there is another user using Anonymous username..

Do we know the new Frame-Relay DND? Please, if someone knows it post it below!

Thanks

By grace of ALLAH I have cleared my exam. SPOTO rocks.
Anyone want SPOTO DUMP contact me.

Kot

QUESTION 508 Which two commands do you need to implement on a router to support PPPoE client?(Choose Two)
A. peer default ip address pool
B. MTU
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number

Ans D,E

You are incorrect in that statement because the correct syntax of the command is “pppoe enable” not “pppoe enable group”

Please refer to:
https://www.cisco.com/c/en/us/support/docs/long-reach-ethernet-lre-digital-subscriber-line-xdsl/asymmetric-digital-subscriber-line-adsl/4105-2600pppoe-4105.html

I thanks to networkingggg he did a great job. And some more guys are really doing hard-working. I appreciate all of them.

@Ann congrats .
which questions came out ?

Hello Guys. Can you send me latest duumps 300-101 pdf please . Ultel93 @ gmail. com

@Ann
congratulations Bro :)

Lütfen bana ulaşır mısın?
please contact with me
nneettwwoorrkkiinngg @ gmail.com

Hi
I passed today!! 8xx
A lot of new questions
The D&D are the same and labs are the same
Eigrp stub, ipv6 and ospf sim

@Alv congrats.

could you communicate with me about the exam ?

veryyhardworking@ g mail.com

@Ann
Congrats bro :) I am happy to hear

Please contact with me
nneettwwoorrkkiinngg @ gmail.com

Hello guys,

Regarding this question i think we should take a closer look:

QUESTION 478
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose
Two)
A. area Id match
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
E. MTU mismatch
Correct Answer: AD

We all know that OSPF timers must match so we do not need to spend much time on answer D since it is one of the correct answers.
Also we know that authentication can be per interface and global for all interfaces, so this could be another right answer. But we do have an option for MTU mismatch. So, i believe that we need to focus more on MTU mismatch.
As per INE documentation:
“Basically this means that if a router tries to negotiate an adjacency on an interface in which the remote neighbor has a larger MTU, the adjacency will be denied. ”

Reference:
http://blog.ine.com/2011/03/30/ospf-and-mtu-mismatch/

Also as per cisco documentation if there is a MTU mismatch, neighbors stuck at Exstart state:

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13684-12.html

We all know that cisco`s exams are a bit tricky and this is a confirmation. My opinion is that we need to assume that we are using global authentication which is OK.

@Ann, please send me SPOTO dumps – {email not allowed}

@Ann, please send me SPOTO dumps to: sundayaremu86 at gmail dotcom

Just passed the text yesterday. Netowking is still good. I have OSPF STUB sim, EIGRP STUB, and Redistribbution OSPF EIGRP with link between R2 and R3 FAstethernet. So we need to add distance eigrp 89 105 to force traffic from R1 to go thru R3

@King 89 105 ? so 90 105 ?

Hello all,

When someone refers to the DnD, what are the exact ones? For example, @Scarlett mentions DnD frame relay, gre, urpf, acl. In the nneettwwrrookkiinngg dump I see multiple Frame Relay and GRE DnDs. Can someone please point me in the right direction? I might just be an idiot or looking in the wrong spot.

Also, what is the best way to contribute? I plan on taking my exam next month and want to help you guys out since you all have helped me so much! thanks

@Mr congratulations! Do you mind sharing the question number of your DnD with me? I’m an idiot and confused.

@king
congratulations

@Anonymous01
I will check the Question

QUESTION 478
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose
Two)
A. area Id match
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
E. MTU mismatch

Hello nneettwwrrookkiinngg g,

I am looking at this question in pdf provided by you:

QUESTION 601
Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?
A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers
Correct Answer: A

Don`t you think it should be Multihop? Because when we have single CPE connected over multiple links to a single PE we usually configures loopback and source the updates from that loopback interface. Since we know that by default TTL is 1 and we are going to a loopback interface neighborship won`t be established. As a second necessary command is to change the multihop option to at least 2. If we do not specify an value, router will specify a value of 255.

Here you can see the answer of the well-known trainer and networking guro Keith Barker:
https://learningnetwork.cisco.com/thread/12590

P.S. Thank you for the effort to combine all the questions in one document!!

Hello nneettwwrrookkiinngg g,

I would like to comment another question:

QUESTION 609
what happens when a router receives a packet with a TTL of 0 ?
NEW Q
A. the router sends an ICMP Destination Unreachable Message to the host that sent the packet.
B. the router attempts to forward the packet along an alternate path in the routing table
C. the router flags the packet and forwards it to the next hop
D. the router sends an ICMP Time Exceeded Message to the host that sent the packet
Correct Answer: A

Correct Answer should be D:

Time Exceeded: RFC-792

An incoming Time Exceeded message MUST be passed to the
transport layer.
DISCUSSION:
A gateway will send a Time Exceeded Code 0 (In Transit)
message when it discards a datagram due to an expired
TTL field. This indicates either a gateway routing
loop or too small an initial TTL value.

https://tools.ietf.org/html/rfc1122#section-3.2.2.4

Hi All

don’t trust others Dump
nneettwwrrookkiinngg dump is valid
I am working
how can I do make good document

Just trust my document for the Exam

Good luck everybody

@Anonymous01
Thank you bro
I am looking your questions

@Ann csn you srnd spotodumps to zokazoka198 at gmail.com ?

@ nneettwwoorrkkiinngg g
I was checking different dumps from different sources and all of them are included in your’s
thank you for you effort, one question I have, the most updated dumps are 635 is that right ?
thanks again :)

The networkingggg dump might be valid, but it also has 600ish questions.. do you really think you’re saving yourself time by memorizing 600 questions and answers? You’re not.

The spoto dump has 146 questions and when i took the test twice it is quite a bit more accurate at least compared to the networkingg dump. You still cant pass the test by just memorizing the spoto dump.

I paid ~$220 for a testking dump and it was ABSOLUTE SHIT. do not use testking, that is definitely the WORST dump and is houldn’t have wasted my time memorizing it. There was probably 1 question and answer in the dump that was on the test — out of taking the test TWICE.

I tried to memorize all 600 questions in the networkingg dump and the 146q in the spoto dump and im sorry to tell you it wasn’t sufficient.

Good luck to everyone who is here the sims on this page are valid and if you memorize them you will likely find the test a hell of a lot easier.

Hi All
I am working new dump files
please wait for me
I will Share tomorrow!!!!

——————————
My fried pass the exam bu he need Tshoot dump
if you have please share for me

nneettwwoorrkkiinngg @ gmail.com

Hi!

Kindly answer the question:

By default, which type of IPv6 address is used to build the EUl-64 bit format?
A. unique-local address
B. IPv4-compatible IPv6 address
C. link-local address
D. aggregatable-local address

Digitaltut: ?
nneettwwoorrkkiinngg: C

@Ann

Please share 146 spot for me

I have TSHOOT premium member
Will share you

Kyawlinmyozunaung at g mail .com