Share your ROUTE v2.0 Experience

@kaleem
Whether remove area 54 virtual-link 3.3.3. or not, we can see R4’s ipv6 loopback in R1 ipv6 touting table , R1#show ipv6 route command and no need to ping.
In exam,
R2(config)# ipv6 router OSPF 1
R2(config-rtr)# area 11 virtual-link 3.3.3.3

R3(config)# ipv6 router ospf 1
R3(config-rtr)# no area 54 virtual-link 4.4.4.4
R3(config-rtr)# area 11 virtual-link 2.2.2.2

R4(config)# ipv6 router ospf 1
R4(config-rtr)# no area 54 virtual-link 3.3.3.3

After that R1# show IPv6 route
We can see R4 ipv6 loopback in R1 ipv6 Routing table, no need ping.

PK,

It worked for me. The only lab that doesn’t is the pbr. When your configuring the access list you need the traffic type. Since the host is a router you need to apply echo not http it tell you in the lab. I just took the examine on Sat and passed it!

Drogon,

You need to get in contact with @nneettwwoorrkkiinngg. He does have all the questions for the route examine trust me.

PK,

It worked for me. The only lab that doesn’t is the pbr. When your configuring the access list you need to change the traffic type. Since the host is a router you need to apply echo traffic not http traffic it tell you in the lab. I just took the examine on Sat and passed it!

@IQ

access-list 101 permit tcp any any eq www

is it right.?

Any thoughts on this guys?, shouldn’t be the answer A or D since you can only specify one of them?

QUESTION 690
You are configuring a static route. Which action must you take to avoid the possibilitiy of recursive row
A. Use the ip route command to specify the next-hop IP address only
B. Specify the next hop a directly connected interface
C. Use the ip route command to specify both the next-hop IP address and the connected interdace
D. User the ip route command to specify the connected interface only
Correct Answer: C

R1(config)#ip route 0.0.0.0 0.0.0.0 ?
A.B.C.D Forwarding router’s address
Async Async interface
BVI Bridge-Group Virtual Interface
CDMA-Ix CDMA Ix interface
CTunnel CTunnel interface
DHCP Default Gateway obtained from DHCP
Dialer Dialer interface
FastEthernet FastEthernet IEEE 802.3
Lex Lex interface
Loopback Loopback interface
MFR Multilink Frame Relay bundle interface
Multilink Multilink-group interface
Null Null interface
Port-channel Ethernet Channel of interfaces
Tunnel Tunnel interface
Vif PGM Multicast Host interface
Virtual-PPP Virtual PPP interface
Virtual-TokenRing Virtual TokenRing
XTagATM Extended Tag ATM interface

@ Nneettwwoorrkkkiing

is there any updated dump after the updated one on 09.09.2018 ??

Hello Guys

Can anyone confirm the 195q dumps is enough to pass with the labs? Does it have the new questions?

@IQ & @PK so in the case of echo the ACL should be permit tcp any any eq echo? or permit icmp any any?

where can i download gns3 sims for the route?

Hello, JAJA.
could you send me actual question to sys.yuriy at gmail.com.
Thanks.

Hello, @nneettwwoorrkkiinnggg.
could you help and send me actual question to sys.yuriy at gmail.com.
Thanks.

Pray for me tommorrow is my paper
i will inform all of you and share the recent dumps if found corrrect
currently working with spoto 146

hello,

good chance for tomorow.
the sptember’s dump of networking is the best :) in adition of spoto

Do we need to do the first CCNP and the third CCNP exam in 3 years? or by doing another CCNP exam will extend the validity of the first exam by another 3 years?

I started (first exam) CCNP in March 2016 with 300-115 and 300-101 now in September.

How much time do I have to do 300-135 and take CCNP R&S?

QUESTION 518 in NETWORKING dump

How can you mitigate fragmentation issues between endpoints separated by a GRE tunnel?
(they changed it, they added GRE)
A. PMTUD
B. TCP MSS
C. windowing
D. ICMP DF bit
Correct Answer: B
Section: Networking – NEW Questions

it is sometimes answered PMTUD and other times answered TCP MSS
which answer is correct ??

@Mizo

This situation can be avoided by setting the “ip mtu” on the GRE tunnel interface low enough to take into account the overhead from both GRE and IPv4sec (by default the GRE tunnel interface “ip mtu” is set to the outgoing real interface MTU – GRE overhead bytes).

just passed the exam. every single question & DnD from networking 195q. thank a lot @networking &Digitaltut

@nneettwwoorrkkiinnggg

Hi , i noticed different answers to same kind of questions:

QUESTION 644
Which two statements about EVN are true?
A. It supports IPv6 traffic.
B. It can support up to 16 VNs.
C. It uses redistribution to share routes between VNs.D. It supports SSM only.
E. A configuration can be based on an existing VRF configuration
Correct Answer: CE
wrong seems to be A-E
=>EVN Supports PIM and IGMP with SM and SSM modes for mVPN

QUESTION 602
Which two statements are true about EVN? (Choose Two)
A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only
Correct Answer: AB

https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/layer-3-vpns-l3vpn/whitepaper_c11-638769.html

Hi.. i’m taking exam tomorrow.. can anyone help me with D&D if they were from Section September or from D&D section ??

Thanks in advance

@ Anonymous

so which answer is the correct one TCP MSS OR PMTUD ??

Yeah sorry, too many options mtu, mss, pmtud, etc…

I would go with TCP MSS, since that is “negotiated” by the endpoints, where as pmtud is per device in the path.

do i need spoto or @nneetwworking
i found a lot of wrong answers in @nneettwwoorrkkiinngg

195 question are hard to understand
they have answer and correct ans
which one is corect ?

@Casco – info to take CCNP routing and switching

You need to clear all exams within 3 years…..by giving route now will not extend it by 3 more years

@Imssr09 thanks for your confirm
Is there anyone that have a valid dump for certification 300-135?

@nneettwwoorrkkiinngg
dumps are fake not a single question came from them
beware of scammers always keep your money safe
@67MOCCNP a FAKE one
@dzy a FAKE one
done reverse engineering
every time their ip’s are same
195 are no longer valid

@nneettwwoorrkkiinngg
dumps are fake not a single question came from them
beware of scammers always keep your money safe
@67MOCCNP a FAKE one
@dzy a FAKE one
done reverse engineering
every time their ip’s are same
195 are no longer valid

searching for spoto
will up date soon

@faouji – hahaha love it.
Please give us a VERY brief overview of how you “done reverse engineering” then we will believe you instead of laughing at you.

you are on of them scammer
open the content in html
go for source file you will get the result
every time AS define of india tel some bulshit in asia

@faouji

hahahaha stop this joke my friend

@mizo r
you are also one of them
why are you making people fool
just go to any browser => open settings => then developers tools
you will get what you want
w8 you r the same person with the name of @nneetttwwoorrkkiinng
oh ! yes i found another scammer
please beware of this bitch

why @nneettwworrkkiinng is sharing his email on the site
and also why are you so hot
@mizo
if it does not relate to you then why are you barking
just stop crying

@hahahahhahah

access-list 101 permit tcp any any eq echo

@faouji

With all respect and appreciation to you
there is no bitch here except you my lovely friend hahahah
don’t take it offensive

PBR lab in gns3

access-list 101 permit tcp any any eq echo
route-map pbr permit 10
match ip address 101
set ip next-hop 10.1.101.1
then on interface
ip policy route-map pbr

show route-map
still nothing match??????????

Guys! Simple question here.

I’ve seen Networking DUMPS from top to bottom but I haven’t found any LABS. Just DnD. It’s kinda weird to me since the SWITCH exam has a ton of labs.

Does the ROUTE exam have any labs at all? Or are they in another PDF?

ty!

Hi All
How is going?

nneettwwoorrkkiinngg@ gmail. com

@nneettwwrrookkiinngg

I still facing problem with PBR no traffic matching everything same. all commands correct.

access-list 101 permit tcp any any eq echo
route-map pbr permit 10
match ip address 101
set ip next-hop 10.1.101.1
then on interface
ip policy route-map pbr

show route-map
still nothing match??????????

@nneettwwrrookkiinngg

where can i check the sims?

Which configuration can you apply to a device so that it always blocks outbound web traffic on Saturdays and Sundays between the hours of 1:00 AM and 11:59 PM?
A. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 permit udp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 out
B. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in
C. time-range SATSUN periodic Saturday Sunday 1:00 to 11:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in
D. time-range SATSUN absolute Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in
Correct Answer: B

why b? shouldn’t be A since is OUTBOUND traffic? also, i don’t understan why all the statements are permit tcp since we are trying to block web traffic. shouldn’t it be deny tcp?

@qasim

1. can you ping isp1 and isp2 from the host?

2. what interface on what router are you applying the route map?

@qasim

actually i think the acl should be:

access-list 101 permit icmp any any eq echo <—icmp ping

not

access-list 101 permit tcp any any eq echo <—tcp ping

(maybe, can't lab it at the moment to verify)

@j
beware of scammer
@mio
@jazz
@andy
etc

Hi Guys,

Just passed exam got 9xx /1000 , @networkingg, @digitaltut thank you so much.

195 Q dumps are valid as on date. Labs from Digitaltut site.

@faouji.. please don’t spread false news

Labs: EIGRP Stub / OSFP Stub / EIGRP-OSPF redistribution

@andy please share the dumps or can you send re_hariet at yahoo dot com

@Andy

Which is the OSPF Stub lab?

hey guys,
any one have 300-101 dumps? please send me am.masoomi @ hotmail.com

thanks