Share your ROUTE v2.0 Experience

Can any one send the 757 q dumps to me
moatasem82 @ hotmail . com
Please
Please
Please

@Storm

thanks for tryin, email; ccnprs 12 go at gmail .com

please to try

thank you

@ networkc2020 @bobafett
Congrats guys,
Do you remember any new questions?

By the way most of the questions of Spoto dump are exist in 757q and Route_Dec dumps. Maybe 95 percent of it.
Am I right, guys please if you remember any new questions or a keyword please search it in the dump files you have then share.
Next week I take the exam.
Thank you,

Passed the exam yesterday. 9XX/1000.
EIGRP Stub and EIGRP/OSPF redistribution.

All of the question are on Route_Dec_18 and Spoto Q227(review the Q757 as well)
no new DnD questions Framerelay, Stateful/Stateless,ACL.

Passed my test last week, digitaltut is good enough to pass. About 10 new questions, which if you have concepts you will be fine. I got 4 labs I don’t know why:
LABS: EIGRP STUB, EIGRP-OSPF REDIST, IPv6 OSPF VL & OSPF
EVAL: OSPF
DND: NAT64, uRPF modes, ACL, COPP/MSS, FRAME RELAY
HINT: PRACTICE LABS THOROUGHLY with all the variations, READ through the Questions properly in exam and please do not get misguided with BLOCK letters in the exam, if you know answer you are selecting is good, it is good. THANX

I want to find out how long does it take to see CCNP certificate and stuff on cisco website if we have passed all 3 exams but with different exam number? Do I have to give all 3 exams in ‘300-‘ or it can be ‘642-‘ as well?

How can you mitigate fragmentation issues between endpoints separated by a GRE tunnel? (they changed it, they added GRE)
A. PMTUD
B. TCP MSS
C. windowing
D. ICMP DF bit
Correct Answer: B
Section: Networking – NE

is it b or d?

Should be B, I think.
You can config: on router interface. At least, I did it in real world when two endpoints connected with GRE had RDP connection problems, all is gone after mss adjustment.
Correct me if I wrong

“ip tcp adjust-mss” command on interface

Hi all,
Please share 757 q dumps to me . k i n g k y a n 6 (at) g m a i l (dot) com

Do you have newest ROUTE dumps? If yes, please share vallentinche @ gmail . com Thank you so much in advance :)

To pass read recommended books and used this website don’t follow comments like chole they are parasites do your labs all the lab are on this website and used practice their questions .

Hi, passed today.

53 questions,
3 x Drag&Drop (one with DMVPN (key,keepalive,ipsec,mss,mgre), one with loose/strict mode and one with steps in NAT process (routing NVI, binding, translating, session).
2 x SIMs – IPv6 OSPF Virtual Link Simulator and EIGRP Stub Simulator
1 x EIGRP Evaluation Simulator

The rest was a mix of all questions but they were all in the quizes. Thnx digitaltut! To pass the exam, I found all here.

Problems with the SIMs in exam:
EIGRP Stub Simulator:
For me in the exam the /20 summarized route did NOT work in the exam simulation. Possible were 10.2.0.0/16 or 10.0.0.0/8 – I tooked the /16. Sometimes the SIM “hanged” and I needed to delete and put it again the summarized route so that I have just 2 10 routes on R3 ….

EIGRP Evaluation Simulator
In the exam sim I could’nt figure out what the correct ratio is. The command “show ip route 150.1.6.6 did not work. For eigrp topolgy I had to use “show ip eigrp1 topolgy all-links”.
For the answer I tooked the 19:80 ratio but I did’nt know if this was the right one in my exam. The other qeustions to this SIM were like here.

Good luck and all the best.

@spindu
Cograte
Cab you tell us about the valid dump
Is all questions was from the route-Dec-2018 and 227q or there is some new questions

@ spindu congraats mate,

Thanks for sharing the information. By the way most of the questions of Spoto dump are exist in 757q and Route_Dec dumps. Maybe 95 percent of it. could you please if you remember any new questions.

Thank you,

which are the valid dumps at the moment please guide me and from where I can get these

Hi all, anybody had in his exam simlet ,, EIGRP – SHOW IP EIGRP TOPOLOGY ALL-LINKS ” ?

Cheers

Passed several days ago with 800+
EIGRP Evaluation – same questions as here but show ip route command not available, so I chose answer randomly; also for question of ReportedDistance there were TWO “via” records, not one, in show ip eigrp topology output, and all that values were in answers

EIGRP Stub – used /16 mask, routes are seen on R3, all is ok

OSPF Virtual-links – no problems with this lab, R4 loopback appears on R1 as you make right configuration

DNDs are all from here

There were 3-5 questions I didn’t seen in MPQ, but didn’t remember. Some questions were look like they were similar to what you see here, but with some differs, so read carefully.

All I used for exam is Foundation Learning Guide and Digitaltut MPQs and DNDs

Hi guys!
Can you explain me difference between 300-101 and 300-101 v2.0? I’ve been preparing with Official Certification guide 300-101. Is that enough or should I buy v2.0?

OSPF has R1 router ID 172.18.1.1. What happens when R1 configure with a new loopback
interface IP address 172.17.1.1?
A. OSPF chooses 172.17.1.1 as new router ID when R1 is rebooted.
B. OSPF chooses 192.168.21.0 as new router ID when apply new configuration.
C. OSPF chooses 172.17.1.1 as new router ID when apply new configuration.
D. OSPF retains 172.18.1.1 as router ID until interface on which is configured goes down
answer correct A or D. Please help me???

I cleared the exam today, Alhamdulillah.

53 questions.
2 Labs: EIGRP (exactly the same as here) and OSPF
2 Simlets: EIGRP stub and Atlanta
D&D: All from here.
All the questions were in premium membership in here.

I only saw 3 or 4 new questions, not in digitaltut:
One about “which IPv6 addressing is for multicast”, with several options
One about commands, i didnt know the meaning but it was easy due the option answers
One about two switches with communication problems.

Thank you Digitaltut team and everyone who helps here.

@ mr.trieu – I think is answer is ‘A’, (but the question is maybe confusing because it wouldn’t work if the new configuration is not applied…)

“”By default, the RID is the highest loopback IP address. If no loopback
addresses are configured, the RID is the highest IP address on an active
interface when the OSPF process is started. The RID is selected when OSPF
starts and to maintain network stability is not changed until the OSPF
process restarts. The OSPF process can be restarted by rebooting the router
or by using the command clear ip ospf process.””

@Storm
I searched spoto 227 questions and I think you are right. Almost all of the Spotos 227q are in the 757q and Route_Dec.
I realized that only one question(may be more than one I might be wrong, please check it out) of Spoto dump is not exist in neither networking757q nor Route_Dec
This question you can find 300-101 V23.75 dump which has some wrong answers.
And this dump says the answer below but I added Spoto’s answer which is verified some of Guys in the forum.

Item 98 of 100 (SPOTO 227)
NO.45 Refer to the exhibit.
Which statement describes the effect of this configuration on a Cisco router’?
A. The default route through 10 0 0 1 is never used
B. The default route through 192 168 0 1 is used only when 10 0 0 1 is unreachable
C. The default route through 192 168 0.1 is never used
D. The default route through 10 0 0 1 is used only when 192 168 0 1 is unreachable

Answer: D
Answer: B (According to Spoto and some of Guys in the forum (RouteRider and pjsousa))

Hey guys how to find 757q dump. Is spoto answers are wrong.
Please send me latest dump.
lnsameerafernando(at)gmail (dot) com

Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose
Two)
A. area Id match
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
E. MTU mismatch
Correct Answer: AD

is a and d the correct answeR?

FAty yes A- D

Passed few days ago.
Thanks digital and members.
digital premium is valid, same lab, same sim, same D&D, same question MPQ + New Question Part 5
got more or less 5/6 news questions.

Passed too using Maria dump

can somebody please post networking 757 link

can somebody please share networking 757q dumps at below mail:
w*a*dh*w*a*s*on*a*m*11*@g*m*a*il.c*om

How many questions are New Questions Parts 5?

How many questions are in New Questions Parts 5?

I just passed to today, 8xx. 75% of the questions are in Most popular Questions and New Updated Questions Part 5. Lab is the same with names of router changes a little bit.

However, if you *understand* and remember the questions in 2 parts I mentioned above (Most popular Questions + New Updated Questions Part 5 + Labs) You will pass for sure.

So please don’t worry, just spend enough time to learn the questions, especially the lab, you have do to them again and again. I did them 4 times. And you will pass the exam for sure.

If you learn and don’t understand, you can’t pass because some questions are different in wording.

Thank you digitut!

@huyaan
@Done

What are you referring with “New Updated Questions Part 5”?

Hi,

I have passed today, i had followed dumps from here only. There were about 10 new qs, but you would be fine if you have gone through the details explanation of each qs.

LAB
OSPFEIGRP redis
EIGRP StuB

SIMLET
OSPF

I would recommend you to became Premium members of thus site, only $15 and you have everything there.

Thanks digitaltut team for doing a great job for us.

Congrats Azim bhai.

Could you please share the dump which you have followed.
On sajedk55 at g m ail dot com.

Can any one share new updated question part 5 at sajedk55 at gmail dot com.

@azim
congrate

Can you share the “new question part 5” with me
moatasem82 @ hotmail .com

Is there any one want the 757q 1, and 227q , i can share with u

@huyaan
congrate

Can you share the “new question part 5” with me
moatasem82 @ hotmail .com

Is there any one want the 757q 1, and 227q , i can share with u

@done
congrate

Can you share the “new question part 5” with me
moatasem82 @ hotmail .com

Is there any one want the 757q 1, and 227q , i can share with u

Hello @CCNP_Renew ‘Sometimes its difficult to know who to believe.’
I completely agree with you, it’s very hard to know who is legit and who’s fake on this site. I’ve used this resource for both the Route exam – that I took on Monday and the Switch exam that I took about 12 months ago. On both occasions I was able to find the most recent dumps on this site and I have to say they were the thing that helped the most. All the labs that came up on my exams were also covered on this site – which is where you get most of your marks, so this is invaluable information to help pass the exam.

@Storm
There were some new questions, no more than 8 or 9 IIRC. I don’t remember what they are now but if you study the questions on the dump and know the concepts you should be fine. The main thing is to know the Labs and SIMs inside out and you should get the bulk of the marks you need. From there you just need to get most of the questions and D&Ds right and you’ll pass.

If anyone needs the latest updated dump (Route_Jan_2019) click on ‘ROUTE FAQs & Tips’, scroll down to the section just before the comments, click on the link to the route-question-and-answers and then download from the mediafire link.

I should also say that membership to this site is well worth the $15. It includes interactive SIMs and Labs to practice for the real exam. It has all you need to pass.

Sorry it’s taken me all week to reply but I’ve been busy at CLEUR – if you get a chance to attend one of these conference I can highly recommend it. So much to do and see, a valuable experience.

is it ok to only study from 757 q from ip helper. not studying from any other resource to avoid confusions.

will i be able to pass the exam?

Hello, can anyone mail me the dumps at
agarwalayush1996(at)gmail.com

passed yesterday , all what you need to be certified is in this website.
Dnd Loose mode vs strict mode; DMVPN…
labs: IPv6 OSPF Virtual Link Sim, EIGRP Stub Sim and EIGRP Evaluation Sim

some questions:

Which command can be entered on router R5 to configure 80 percent of the bandwidth of a link for EIGRP Autonomous System 55?

A. R5(config-if)#ip bandwidth-percent eigrp 55 80
B. R5(config-pmap-c)#priori1y percent 80
C. R5(config-if)#ip bandwidth-percent eigrp 80 55
D. R5(config-if)#ipv6 bandwidth-percent eigrp 80 55
E. R5(config-if)#ipv6 bandwidth-percent eigrp 55 80

Which two addresses types are included in NAT? (Choose two)

A. inside global
B. global outside
C. outside internet
D. inside internet
E. outside local

Etc … all questions were from New ROUTE Questions – Part 5 and Most Popular Questions
Thanks and good luck everyone

@Magir,

Please share with me the dumps 757q 1 and 227q, i would be most grateful.

amtina2 @ yahoo . com

(Please remove the ‘ ‘ spaces)

OSPF EVALUATION: AGE IVARIABLE, HOW TO DO ?
How old is the Type 4 LSA f
rom Router 3 for area 1 on the router R5 based on the output
you have examined?
A. 1858
B. 1601
C. 600
D. 1569

What do you think:

Q94.Which set of actions does a network engineer perform to set the IPv6 address of a DHCP relay server at the VLAN interface level?

A. Enter the VLAN interface configuration mode and define the IPv6 address of a DHCP relay server
B. Enter the global configuration mode and enable the IPv6 DHCP relay
C. Enter the global configuration mode, enable IPv6 DHCP relay from interface configuration mode and define the IPv6 address of a DHCP relay server
D. Enter the VLAN interface configuration mode, enable IPv6 DHCP relay, and define the IPv6 address of a DHCP relay server

In my opinion must be C, but in test it appears as D

Q155. Which three methods can a network engineer use to fix a metric-based routing loop in the network? (Choose three)
A. Filter routes manually using prefix lists
B. Implement proper network summarization on key routing points
C. Utilize route database filters
D. Filter routes based on tags
E. Implement offset lists at network boundaries
F. Filter routes manually using distribute lists

on PDF i see that are DEF, but on flash Questions (MPQ) it appears to be BCE

Can someone send me the 757 dmps?

happee246 @ outlook.com

(remove the spaces)

Can someone send me the 757 dmps?

happee246 @ outlook.com

Pass today with 9xx all is on this website.
Thanks digitaltut
only one new question on SNMP