Share your ROUTE v2.0 Experience

@MAD

Contact me at vaiking2020 @ gmail .com. We can work together and be careful because are a lot of fakers just trying to sell dumps and wrong answers of this site. I use this site about 6 years ago and it was better maintain.

@ Zero Zero, 2 if not three

I posted an update yesterday, anychance of updating it?

Hi, we are seeking for stable dumps suppliers. The suppliers should include large amounts of requirements and Long-Term cooperation. The price is good and can be negotiated. If you have a large amount of dumps ,contact us!
Email: stabl
edumps@outl
ook.com

Hi, we are seeking for stable dumps suppliers. The suppliers should include large amounts of requirements and Long-Term cooperation. The price is good and can be negotiated. If you have a large amount of dumps ,contact us!
Email: stabl
edumps@outl
ook.com

Hi, we are seeking for stable dumps suppliers. The suppliers should include large amounts of requirements and Long-Term cooperation. The price is good and can be negotiated. If you have a large amount of dumps ,contact us!
Email: stabl
edumps@outl
ook.com

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

A. Specify the test frequency
B. Enable the ICMwdP echo operation
C. Schedule the ICMP echo operation
D. Verify the ICMP echo operation

B

Which technology can combine multiple physical switches into one logical switch?

A. HSRP
B. VSS
C. VRRP
D. NHRP

Which two features are compatible with port security?

A. Voice VLAN
B. SPAN source port
C. DTP

Hello guys! Could you please send me valid dumps at ojha dot ajay4 at gmail dot com? Thanks a lot!

Hi Everyone,

I have been following up this digital tut since Jan 2019 what I feel by reading different comments that even having premium membership and updated digital-tut questions, still there are bright chances you could fail in exam. Because every time there are some new questions.
Please experts guide me whether I am right or wrong.
If I am right in my opinion then from where we can get valid dumps on economical price.
Any guidance is more then welcome.

Guys just wondering if all I need to do is study this site for me to pass the exam? I’m also using Chris Bryants Route book which is an easy read.

@EVERYONE

Can anyone provide any recent feedback as to new questions they have seen in the route exam?

I have practiced all of the questions you see with the Premium Access such as Composite Quizzes (1-15), MPQ’s (all of them), the NUQ’s 5 / 6. Will be interesting to see if this is enough when I sit the exam next week.

@The King
I have been following this site through all my cisco exams, from CCNA(9tut) Switch (certprepare) and I can say from experience that if you study on your own first, then come here for dumps/revisions and study them indepth, you should be fine.
Thing is, there are 2 categories of people who come here to complain
1. Spammers who try to run down this site, so as to promote others
2. Those who don’t study well and expect this site to do some magic in their brains for them to pass

I’ll advise you. Go back a couple of pages and browse through and you’ll see the links to the latest dumps. DON’T beg for dumps
Also try to get a premium membership, so u can practice the Labs and trust me, you’ll be fine.

is the config done on the routers or are the commands entered into sim just like what appears here?

@ Greeners

Now that you have finished ,I am going to give you more on this platform. As soon as you read them do research and compare with my answers.

I have a test ccnp route in May-9-2019
would you please share me new dump to ccnp3290 @g m a il. co m

please remove space in this email

thanks for your help

Any CCNP-Route passers today?

Hello all, I sit in the exam tomorrow I will update if i see any new questions.

My study material has been cbtnuggets and digitaltut. I have premium membership and have studied every section on the right. I will let you guys know some of the questions on the composite quizzes are WRONG (I stopped at composite quiz 7). After seeing multiple questions wrong I checked the comments and other people have reported this. I used the section quizzes instead.

@The King
I have used 9tut and now am using digitaltut. Most of the time when users are reporting they are seeing new questions its cuz they only go over the MPQ and new questions. I read comments on every section as that is where you will normally find any actual new questions and especially on this page. Always go back the past 3 months and check every comment. Usually will find some new questions or pointers of one being reworded.

@YourMom

Please update us. I want to sit for the exam this month.

Hi anyone here who can send the link of CCNP Route cbtnuggets video by Jeremy?

Hi all,

This day I passed an exam with 9xx score, I confirm that just using “digitaltut’s question” is not
enough to pass an exam. You have to learn thoroughly and have a deep knowledge about concepts which make you pass easier.

Today I have 3 labs:

+ PBR, Redistribute, OSPF, EIGRP simlet.

+ DnD: CoPP, Access-list, NHRP.

I think more than 7 new questions and the rest is reworded many times, but I don’t remember
exactly such types of question.

I hope all will pass an exam as much easy as possbile.

@YourMoM

As per the Route_Apr_2019.pdf, there is New updated part 6 then Most popular questions after that you get part 5, ospf eigrp evaluation sims , pbr ipv6 ospf virtual link, eigrp atub sim , ospf sim and eigr simlet. Is there any questions missing? As per ur previous comment MPQ and new questions What does NOT include ?
I dont want to miss any questions

@Gozid,

Please, what dumps do you use to pass your exam ?

@Saji did you find Route_Apr_2019.pdf in this comment section? I was not able to find it yet.

I passed today 83x/1000 .
Thank for digitaltut and everyone who share new questions.
I have 3 labs : ospf evaluate simlet , eigrp and ospf redistribute , PBR .

Just passed, 8xx
Pbs, ospf ev, eigrp ospd dis…. Copy run doesn’t work. Tape to complete is supported.
3 dnd. Digitaltut q&a valid. Don’t worry, you will be ok.
Thanks digitaltut and all.

rgre

I watched Keith and Jeremy on cbtnuggets.

The questions on the PDF are the same on here. As for the site you do need premium membership to get everything which is only $15 and totally worth it. For everyone asking for the PDF I have the link below, but I HIGHLY recommend just paying the $15. The sims that come with it are totally worth it. Exam is this afternoon wish me luck!

Remove the spaces and extra letters.

httpssssss://wwwwwww.digitaltut.commmmm/rrrrrrroute-questions-and-answers

@YourMom good luck, let us know once you be back :)

@YourMom
How did you get on?

After failing last week, i redid it today with hopes of not letting my certificate expire tomorrow. Passed today and was thanks my sims, didnt show up until half way through. I passed, because, i passed all labs and D&D all here.
questions i don’t remember seeing: dhcp option 82, udp characteristic, jitters on a network, passive interface. if i was to guess, i would say i did not recognize over 15 questions, compared to last week where i only had a handful. To the Right – Drag and Drop & 2, do the DHCP, IP SLA was favored and AAA. Pretty sure i failed all of that.

Plan to attempt exam in next week but unable to find where are valid dumps. I have dumps but not sure these are valid or not. Kindly guide me.
abdul dot qadir500 @ gmail .com.

Passed the exam. None of the NUQ 6 were on the exam. I did see 6 questions that are not on the site. Below is everything i can remember.

1. Asked about IP SLA deployment. 1 answer had tune in it, 2 answers had optimize in it.
2. Asked about EVN and how it determines routing. 1 answer had uses the default AD, 1 had uses route tags.

These questions did not have the answers on the site, i have copied and pasted what the site has I do not recall what answers were on the actual test.

Which technology does Easy Virtual Network use?

A. MP-BGP
B. DMVPN
C. MPLS
D. VRF-Lite

Which two protocols can cause TCP starvation? (Choose two)

A. TFTP
B. SNMP
C. SMTP
D. HTTPS
E. FTP

Unfortunately I do not remember the other 2 questions.

Overall, 70% were in the sections under 300-101 30% were in the MPQ/NUQ5.
Labs are still PBR, EIGRP OSPF Redistribute and OSPF Eval Sim. Labs are identical to on here. Be sure to do a show route-map to verify before generating traffic you show 0 packets and after you should see 9. I generated twice to double check it incremented. When you do the redistribute be sure to do a ping AND trace route to verify it takes the correct path. I had lab 2 almost forgot to add distance eigrp 90 105, trace route saved me :) **DRAG AND DROPS ARE NONE OF THE NEW ONES THAT ARENT FILLED OUT YET***

One of the other questions somewhat came to me it was asking about the match command that is added to a route map. Possible answers I remember were acl and route map.

@YourMom
Do you remember the D&D question and which answer did you chose for Ospf Evaluation sim lab

All the DnD were on the MPQ and the DnD sections. As for the ospf Sim it matches the exact one on here. Just make sure to become a premium member and read the tutorial then do case 1 and 2. Make sure to practice 2 more as it’s a higher chance you will get it.

@digitaltut

Thanks for the reply. The answers for IP SLA deployment did have the same answers but it was not a choose 4. It was a single answer but multiple were in that answer if that makes sense. Fine tune and optimize were not in the same answer just fyi.

As for the starvation question the answers did not have those. I recall the following answers; http, snmp, and sftp

Following possible answers*

Same for the EVN question, it was the same question but different answers

@YourMom
The lab, is it Ospf sim or Ospf Eval?

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

A. Specify the test frequency
B. Enable the ICMwdP echo operation
C. Schedule the ICMP echo operation
D. Verify the ICMP echo operation

B

Which technology can combine multiple physical switches into one logical switch?

A. HSRP
B. VSS
C. VRRP
D. NHRP

@new

The labs are the same for everyone. They will be pbr, ospf/eigrp redistribute case 2, ospf evaluation. If anyone says other labs and dropping a link to another site its 100% scam.

@YourMom
Well done and thanks for your feedback. I will provide additional feedback end of this week after I take the exam.

With regards to the TCP Starvation as long as you know the difference between which ones use TCP and which ones use UDP, you should be able to work that one out even if the protocols are different to the Digitut answers.

@YourMom
Was the PBR Sim exactly the same commands used on here. I’ve heard people saying there can be problems trying to generate HTTP traffic from the PC.

By default, which type of IPv6 address is used to build the EUI-64 bit format?
A. unique-local address
B. IPv4-compatible IPv6 address
C. link-local address
D. aggregatable-local address

what is the answer ?

@YourMom
For the ospf eval sim. Which answer did you chose for the question on Router 3.
R3#show ip ospf serial 1/0?
Which of the following statement is true about the serial links that terminate in R3
A. The R1-R3 link needs the neighbor command for the adjacency to stay up
B. The R2-R3 link OSPF timer value are 30, 120, 120
C. The R2-R3 link OSPF timer values should be 10, 40, 40
D. R3 is responsible for flooding LSUs yo all the routers on the network

@New
Run the ‘show ip ospf interface’ command from R3. This will display both serial interfaces. Interface Serial 1/0 is up and is ‘Adjacent with Neighbor 2.2.2.2’ (displayed at bottom of serial interface 1/0 output). Timers for Serial interface 1/0 is 30,120,120 therefore the answer is ‘B’.

Hey @YourMom. Congrats on passing!!!! Was their a lot of IPv6 related questions on your exam?

Hello everyone

@YourMom

Please tell me which do you mean (ospf/eigrp redistribute case 2, ospf evaluation) ??

I really don’t know which it is

@greeners
PBR was exactly the same, I used access-list 101 permit TCP any any eq www. I noticed of reports it not working when using 80. As I said I checked before generating traffic and it showed 0 packets. Generated and counted that it sent 9 then it will tell you sends 9, check the route map and seen 9. Now I also seen you say you are using the 15 composite quizzes. STOP IMMEDIATELY as they are not 100% correct. Use the section quizes instead.

@new

When checking the ospf eval lab on the exam the timers actually dont match on here. Make sure you are checking in the direction the answer says. If you only check on R3 on the exam you will notice B and C (real exam shows R1-R3 for C) are correct. For R1-R3 you need to check on R1. For R2-R3 you need to check on R2. I will explain again. R3 interface timers pointing back to R1 and R2 will match for both answer B and C. I checked and neighbors are in full state which is impossible.

@IPv6 not for me

Please review the ipv6 section in MPQ and under 300-101 you will be fine they are the same.

@eagle

Please make sure you get premium membership first. After logging in, below 300-101 you will see lab sim open that in a tab. Above lab sim you will see the sim you can practice with. Make sure to read and understand the difference between case 1 and 2.