Share your ROUTE v2.0 Experience

@Saji.

Yes there are 2 versions.

Please subscribe to Premium membership and u can see and practice both versions. The $15 is totally worth it

@Alabi
The lab, is it ospf eval or eigrp eval

I Passed my exam, there was 16 (yes i have counted them correctly) New questions which i have not seen in MPQ, NUQ5 and NUQ6. So i had to answer them with my gut feeling and guess with process of elimination. I just managed to pass this time luckily! if you see my post from last week, i have mentioned I Failed last week while there was 5-6 new questions, i re-booked the exam within a week thinking that i will give it another shot while i have all the study still fresh in my mind but i found the whole new set of questions with more new and tough questions! :( There was OSPF Evaluation Sim, EIGRP OSPF Redistribtion Sim and PBR Sim in the exam. My 2 cents worth suggestion is Do NOT completely rely on the questions here and definitely expect new questions. Good Luck!

@STARF are you a premium membership? There are some old dumps with the questions which you might call a new/different one.

@STARF

Well done for passing!
You mentioned studying the MPQ, NUQ 5/6 but what about all the other topic questions situated under Route 300-101 down the right hand side? Other who have just passed the exam said many of the questions came from this section?

@STARF
In addition to my last message, can you provide any advice as to what topics the new questions were related to? Any new DnD’s or were all 16 questions new multiple choice questions?

Salam i need latest dumps of CCNP 300 – 101 if any one have kindly share with me on faran _ mussadaq @ outlook . com

@ PETERS, Yes i had premium.

@ Greeners i did go through some sections from the right side column, can’t remember seeing any of the questions there though, you may study those, take the exam and let us know. there were some new routing questions, IPv6, dhcp, AAA and D&D from memory.

@STARF
Cool, I will update you on completion of the exam. Thanks for the advice.

pass today with 9xx
labs are the same ospf eval, ospf eigrp redistribution, PBR

many drag and drop authentication-authorization-accounting, SVC/FECN/DLCI etc…
CoPP/MPP
ipv6 traffic filter/ ipv6 access classes

+ Auth-proxy: It returns information about hosts using proxy service
+ Commands: It returns information about individual EXEC commands and permissions associated with a privilege level
+ Connection: It returns information about outbound communications from the network access server
+ Exec: It returns information about user EXEC terminal sessions with the network access server
+ Network: It returns information about SLIP, PPP and ARA sessions
+ Resources: It returns information about calls that have passed and failed user authentication

i dont remember exactly but it was easy

TLL – when reaches ‘0’ drops packets
ICMP Redirect – indicate to host that another route is available for a specific destination
ICMP unreachable – when destination is unreachable when IP is unable to give a packet to destination host due to some problem or issue
proxy arp– ?
? – ?

about questions
questions are not difficult. register to the digitaltut premium. it will be ok.

good luck guys

@John.
It’s OSPF Eval

@STARF
I agree with u, there were new questions, but definitely not as much as 16. Most of the questions u call ‘New’ are actually in old dumps, like ‘nnetworking’ and others shared here last year.

My advice to anyone about to take the test, PLEASE and PLEASE, go back a few hundred pages if possible and search for old dumps of as far back as August 2018 and study them thoroughly, as they are now being recycled.

@greeners

When do you take your exam? Please update me on your feedback on the exam.

everyone in chat, I will be taking switch exam next, has anyone taken it? If so, any tips?

Everyone
Passed exam today with 8xx of 1000.
Labs – PBR, OSPF / EIGRP Redistribution (Case 2)
SIM – OSPF Evaluation. Could not figure out the correct answer to the ‘timers terminated on R3 question’. None of the answer for the timers matched with what was on the interfaces, so I just chose R2-R3 as per the answer on here.

@Greeners, congrats! How about the questions? Any new, out of digital tut appeared?

@Peter
Will post what I remember about the new questions later today, but there was about 5 or 6 new questions I’ve not seen on here. The rest were the exact same as what can be seen on this site. Most of the questions seemed to be from the Route 300-101 section on right hand side. Can’t remember any from the NUQ sections. All DnD’s on this site as well.

@Greeners, congrats Can you tell us more about lab EIGRP Redistribution (Case 2) thanks in advance

@Everyone
Study advice –
– I studied only the questions from this website under the ‘Route 300-101’ section (on right hand side), MPQ’s, NUQ 5 and 6, D&D’s and the SIM’s. The question that are on this site are exactly the same in the exam, I’d say the majority were from either the ‘Route 300-101 section or the MPQ’s. Can’t remember seeing any of the NUQ questions but there may have been a couple.

@Everyone
New questions I remember –
CEF Question (think it was also mentioned a few pages back), something along the lines of only knowing the source MAC address but something else was missing, what will happen to it, answers were something like:
PUNT
GLEAN
NULL
DISCARD

@Everyone
Another new question was something along the lines of –
– Refer to exhibit and asking for the command to use to summarise between RIP and OSPF
answers were something like:
– redistribute RIP metric 20
– ip summary addresssxxxx
– area range
– summary xxxxx

@Everyone
There was another exhibit where you had to provide the best answer as to how BGP AS 800 being redistributed into OSPF, can’t really remember the answers but one answer was suggesting a static route needing to be used and the other answer no static route was used.

If I remember anymore new questions i will keep you posted.

@Everyone
In summary, all that is required to pass the exam is to sign up to the Premium Membership and study the areas I’ve mentioned above and you should be good for the exam. I would also strongly advise studying using the likes of CBT’s, INE videos and other study material and not just learning the answers parrot fashion. In industry you’ll only look stupid if you don’t know the subject yet you’ve got a CCNP cert.

@Nathan
The ospf / eigrp redistribution lab (case 2) is exactly the same (config wise) as what you see on this site (once you sign up with premium). Only slight difference is the IP addresses between routers but the destination address you have to ping is the same. Additionally, you have to click on each computer icon to connect to the respective router to access the console, but thats pretty self explanatory.

Here are some of the questions I remember having. Lot’s of questions from the Route 300-101 section (in my case)
Which is the minimum privilege level to allow a user to execute all user-level
commands but prohibits enable-level commands by default?
A. level 1
B. level 0
C. level 16
D. level 15
E. level 14

What command can you enter to configure an enable password that uses an encrypted password from another configuration?
A. enable secret $abc%!e.Cd34$!ao0
B. enable secret 7 Sabc%!e.Cd34$!ao0
C. enable secret 0 Sabc%U*.Cd34$!ao0
D. enable secret 5 $abc%!e.Cd34$!ao0
E. enable secret 15 $abc%ie.Cd34$!ao0
F. enable secret 6 $abc%!e.Cd34$!ao0

Which condition must be met before you can configure SSH on a device running Cisco IOS?
A. The device must have an auxilary port
B. The device must have a modem connection
C. The IOS must be a crypto image
D. Telnet must be disabled on the device

Which command instruct a PPPoE client to obtain its IP address from the PPPoE server? (OR What command is needed to get the ip address assigned from the PPPOE server?)
A. interface dialer
B. ip address negotiated
C. pppoe enable
D. ip address dhcp
E. ip address dynamic

Which two statements about Frame Relay LMI autosense are true on a router? (Choose two)
A. It requires the LMI type to be explicitly configured
B. It operates on Frame Relay DTE interfaces
C. It operates on Frame Relay DCE interfaces
D. It operates when the line is up but the line protocol is down
E. It requires the line protocol to be up

Which two statement about GRE tunnel interface are true? (Choose two)

A. A tunnel can be established when a source the source interface is in the up/down state
B. A tunnel destination must be routable, but it can be unreachable
C. To establish a tunnel the source interface must be a loopback
D. To establish a tunnel the source interface must be up/up state
E. A tunnel destination must be a physical interface that is on up/up state

A corporate policy requires PPPoE to be enabled and to maintain a connection with the ISP, even if no interesting traffic exists. Which feature can be used to accomplish this task?
A. TCP Adjust
B. Dialer Persistent
C. PPPoE Groups
D. half-bridging
E. Peer Neighbor Route

Which command instruct a PPPoE client to obtain its IP address from the PPPoE server?
A. interface dialer
B. ip address negotiated
C. pppoe enable
D. ip address dhcp
E. ip address dynamic

@Everyone
Another new question was related to OSPF special areas and which type of special area has type 1,2,7 and also generates a default route. I selected Totally NSSA as my answer.

@Greeners
thanks for your asmwer and your time

@Everyone
A pointer with regards to the PBR lab. The config on this site works just make sure you verify two things before applying your config.
1. Verify the Frame relay link to the ISP from Border router as it’s not labelled ‘Frame Relay’ on the topology diagram.
2. Once you’ve identified which ISP link is the frame relay link, make sure you specify the correct next-hop IP as the address. For me it ended in .2. IP address’s are different to what’s on this site.
Don’t worry it’s easy.

@Nathan
No worries and good luck. Sign up to premium, practice the Route 300-101 topics, MPQ’s, NUQ’s 5 and 6, DnD’s and labs etc and you’ll be fine.

@Greeners

You are right about the PBR Frame Relay link. Mine was different from what’s on this site too.

Congrats on your success

@Greeners, thank you for the advice, I have premmium account, do I have to study MCQ `most-popular-questions??`or just MCQ of module 5 AND 6??

@Alabi – Thank you

@Jules –
From my experience I would study the following sections:
– All the individual topics located down the right hand side under ‘Route 300-101’. Start with ‘Router questions and work you way down the right hand side until you’ve completed both DnD’s. These questions will cover a lot of the older questions which are reappearing on the exam.
– All 10 Most Popular Questions quizzes.
– The New Updated Question part 5 and 6.

Also practice the EIGRP / OSPF Sims and all the lab questions too.

Once you’ve got all those weighed off you’re good to go.

@Alabi
Yes, I think that’s possibly where it’s been catching some people out? It was nice to see the packets increment from 0 to 9 when I hit the ‘generate http traffic’ button from the PC :o).

The other thing was .1 was on the interface of the border router and .2 was on the ISP router so this may have also caught people out for the next-hop address command.

Good luck all!!

the ospf eval question, which ans did you chose when you check the serial interface on R3.
30, 120, 120 or 10, 40, 40

@Alabi

Please, what mean MPQ, NUQ5 and NUQ6?

The problem changed in one day and in another three hours. You think this makes sense? I lost $300 ;^;

There are free written dumps here, I have purchased lab dumps here. it is true! I can only help you here.
at passhot.com

@Ebrahem

can you please send me all the valid dumps.
my test is two days from now
Yara.humaidan[at]gmail.com

thank you in advance

@Ebrahem

can you please send me all the valid dumps.
simonemieje[at]gmail.com

thank you in advance

Recently pass the ROUTE, the pass score 790.
My score was 802, 70 – 75 % question from Last dump – 300-101 pdf.
In Last dump – 300-101 – I was found 5-10 mistakes.

55 question – new question 10-15
2 labs – the same, Policy Based Routing Sim, EIGRP OSPF Redistribution Sim
2 Drag and Drop, ACL, OSPF state
OSPF Evaluation Sim – the same
EIGRP Evaluation Sim – the same

The new question not such simple. So in 100% do not hope from dumps.
Good luck everyone, how are study and going to pass the ROUTE.

@Justin
Sounds like you need to study harder if 70% of the questions are here and you still failed. That means you were relying 100% on this site. Moral of the story is, read the book, youtube, udemy. That should fill in the gaps. Stop being pitiful.

@Cisco Engineer
do you remember any of those 15 new questions ? , at least something specific so we can search in other dumps
Thx

@Justin,
mentioned question are already at this site, do you recognize them or you had different ones:

Valid range for BGP private ASNs?
A. 64512-65535
B. 1-64000
C. 64512-65534

Answer: A
***************
Punt Adjacency: Features that require special handling or features that are not yet supported in conjunction with CEF switching paths are forwarded to the next switching layer for handling. Features that are not supported are forwarded to the next higher switching level.
Drop Adjacency: Packets are dropped, but the prefix is checked.
Null Adjacency: Packets destined for a Null0 interface are dropped. This can be used as an effective form of access filtering.
Discard Adjacency: Packets are discarded.
Glean Adjacency: When a router is connected directly to several hosts, the FIB table on the router maintains a prefix for the subnet rather than for the individual host prefixes. The subnet prefix points to a glean adjacency. When packets need to be forwarded to a specific host, the adjacency database is gleaned for the specific prefix

@Justin
Look at my advice on page 310!!

If you only study the MPQ’s and NUQ’s 5/6 you will fail the exam.

You NEED to study the individual topics shown down the right hand side under the route 300-101 section. Questions in this section are older questions and are reappearing. Digitut also advise you look at these on the Premium home page.

@Everyone
Admittedly there are a few new questions, one of them to do with glean, punt, discard seems to be popular new one (think the answer is punt) and the OSPF SIM lab timers question doesn’t appear to have a correct answer (on the exam). Neither of the timer related answers appear to be correct when you view R1,2 and 3 output.

hi ebrahem, can you share latest dumps. ill be taking my exam next month. thank you!
yuugarenji(at)yahoo(dot)com

any one know the answer im conflicted.
What does the command clear ipv6 ospf process accomplish? Select the best response.

A) The OSPF adjacencies are cleared and initiated again.

B)The OSPF database is repopulated. Then the shortest path first (SPF) algorithm is performed.

@Route-v2-0-experience
Please sharing dump to me. I not download dump, please.
hoangson6973.gmail.com

Thanks

Resat my exam yesterday and pass this time with 87X.

All D&D,SIM, Questions in all areas are still valid so study all of them. Set up LABs or research to prove the answers. Take time to study and don’t rush then it will be ok. Material from here plus become premium member would help. Don’t waste money on those sellers advertising here, they sell the same stuff.

Got about 8 new questions, I can’t remember in details but they were about:

DHCP scope 82

SNMP traps vs SNMP informs

Limitation of RIPV2 when deploy in a supernets network.

passive-interface command: which protocol (OSPF,EIGRP, BGP,RIP, IS-IS) will stop listening and advertising updates.

Good luck everyone!

This IS the best study matériels
https://www.file-up.org / 7orijogv5n48

As a premium member, is the quiz tools alone on this site okay to take the CCNp route Exam ?