Share your ROUTE v2.0 Experience

Is there a question dump and a VCE player setup

@ Rock

please can you send me the dump you used at (daniel.dnq)(at)(gmail)(.)(com)
remove the ()

Hi guys can you share with me CCNP ROUTE COURSE 300-301?

daniel (.)dnq at gmail (.) com

network engineer applies the command ip tcp adjust-mss under interface configuration mode. What is the result?
A. The probability of SYN packet truncation is increased.
B. The UDP session is inversely affected.
C. The probability of dropped or segmented TCP packets is decreased.
D. The optimum MTU value for the interface is set.

What is the right answer? C or D?

@ccnp the answer is C

@hurdor Thanks Buddy.

If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect on the data path is true?
A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.

What is the right answer?

@sally There is no need. As long as you place them where they must be placed, you’ll be fine.

@am Search here in digitaltut and you will find the GNS3 files that you can open with GNS3 versions 1.x and you can work with those files as it was in the sam labs. I used them and I recommended them very much.

If you convert a WAN connection with OSPF from T1 to a Frame Relay circuit, which two actions must you take to enable the connection? (Choose two)
A. Change the OSPF network type to nonbroadcast.
B. Manually configure neighbors in the OSPF process.
C. Manually configure the hello and dead timers.
D. Change the OSPF network type to broadcast.
E. Change the OSPF network type to multipoint nonbroadcast.
 
Answer: A B

hi @CiscoR is the chinese dump enough to pass the exam?

What is the answer to this question ?
Two aspects of an IP SLA operation can be tracked: state and reachability. Which statement about state tracking is true?
A. When tracking state, an OK return code means that the track’s state is up; any other return code means that the track’s state is down.
B. When tracking state, an OK or over threshold return code means that the track’s state is up; any other return code means that the track’s state is down
C. When tracking state, an OK return code means that the track’s state is down; any other
return code means that the track’s state is up.
D. When tracking state, an OK or over threshold return code means that the track’s state is down; any other return code means that the track’s state is up.

Digitaltut says it’s “B”.
Chinese dump, pl and dexters says it’s “A”.

It looks like digitaltut might be right on this one.

Hi! I already forgot but on Lab Sim, will I get a minus points when I perform the wrong command? can I do a “no” command? Or what if I mistyped the command and suddenly pressed enter? Will it accept it and will not have the chance to get my points? Thanks in advance!

What are two differences between SNMP traps and SNMP informs? (Choose two)

A. Only informs provide a confirmation of receipt
B. Traps are more reliable than informs because they generate PDUs from the network manager
C. Only informs are discarded after delivery
D. Only traps are discarded after delivery
E. Informs are more reliable than traps because they require TCP three-way handshake.

Answer: A D ( it´s correct ? ) – for me is A E – Please, anyone can help me ? thaks

I have done my test and got 965/1000!

– SNMP inform v/s trap
– Types of uRPF
– Lots of IP SLA Questions.
– Same lab
– New DD about AAA but it almost the same
– Like two new EVN questions
– SNMP new questions about how works

Without 3 stars ***
https:/*/hide*uri.co*m/xdMM8X

this one:

Auth-proxy: It returns information about hosts using proxy service
Commands: It returns information about individual EXEC commands and permissions associated with a privilege level
Connection: It returns information about outbound communications from the network access server
Exec: It returns information about user EXEC terminal sessions with the network access server
Network: It returns information about SLIP, PPP and ARA sessions
Resources: It returns information about calls that have passed and

Hi! Can anyone please help me, I’m confused with this question

Which two areas does OSPF send a summary route by default ? (Choose two)
A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal

(C and D were the right answer for digitaltut and chinese dump)
but C means it restricts type 3 LSA (summary route)
can someone justify if C is the correct answer.
Many Thanks!

Does any one have CCNP Security Dumps

Hey Guys,

Just passed the exam with 900+

Thanks digital tut. About 95% of the questions are here on digital tut.

Do not listen to any negative comments and look for dumps.

All is here. Thanks Digitaltut.

Which action is the most efficient way to handle route feedback when converting a RIPv2 network to OSPF?

A. Implement route tags.
B. Implement IP prefix lists.
C. Implement route maps with access lists.
D. Implement distribute lists.

A or C ?

What are two differences between SNMP traps and SNMP informs? (Choose two)

A. Only informs provide a confirmation of receipt
B. Traps are more reliable than informs because they generate PDUs from the network manager
C. Only informs are discarded after delivery
D. Only traps are discarded after delivery
E. Informs are more reliable than traps because they require TCP three-way handshake.

Answer: A D are correct

inform TCP two-way handshare not three-way

If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect on the data path is true?
A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.

A correct

@Want to pass
Chinese dump is great but you also need the labs that are here in digitaltut.

@aussie mate!
Congrats! did you study composite or the MPQ and P5/6 is enough for the mcq?

@aussie mate, did you use the dump from april or the one from june?
Thank you,

Which option is invalid when configuring Unicast Reverse Path Forwarding?.
A. allow self ping to router
B. allow default route
C. allow based on ACL match
D. source reachable via both

What is the right answer?

@CCNP D

Where can I get the Chinese dump ?. Can someone tell me?

Cloys

Download the chinese dump from here:

http : / / www. mediafire . com /folder/ds99ccsu2ravgyy,xchxdxvqyasa92z,8d7tjnrqmfvaqxd,54e6kk6501q1ebo,uxoo6fb8d2ad2b8,8qqcmj73gnsth0h/shared

I passed!
Great thanks to Tut and every one!!

Tut Jun dump worked as great!! I only study on this!!

There are some new questions.
Which command summarize external routes into OSPF area?. No complicate wildcard mask
calculation.
Which area type is OK for 1,2,+def,and 7?
And some.

PBR, EIGRP OSPF Redistribution, OSPF Evaluation with a problem(See my post at there.)

Will take the exam tomorrow any tips? saving the labs? drag and drop order? can you give some tips and tricks for tomorrow?

@No no

I would like you to tell me the page directly to buy and download the Chinese dump. I want to know because the questions are updated as time passes and maybe within a month the dump that you indicate is not as updated.

Sorry if I have bad writing, but my native language is not English, I speak Spanish

Nono

I would like you to tell me the page directly to buy and download the Chinese dump. I want to know because the questions are updated as time passes and maybe within a month the dump that you indicate is not as updated.

Sorry if I have bad writing, but my native language is not English, I speak Spanish

Hi BADANG,

In the beginning of exam, there is a “Tutorial.” For your relax and calm down, you should take this.

In general, we cannot go back previous questions and just forwarding page only except questions in a LAB evaluation.

For the LAB, they disabled “wr” and “copy run sta”, so you do not have to, I think, but you should use “ping”, “traceroute”, and provided tool like HTTP generator that was obviously simple and commands for confirmation such “sh ip ospf xxx” and etc. Then you can leave the lab simply, I guess!!

For drag and drop, the number of options and questions are same, so there was no remainder options. They were exactly as same as Tut dump.

HTH, good luck to you!!

@LebronTOs

Please study the old questions too as they appeared in the exam. All the drag and drops and the SIMS are in digitaltut.

@netqaq11

I just studied everything from digitaltut ( Old questions + MPQ + Part 5 + part 6)
I did not refer to any dumps.

Which purpose of the AAA accounting feature is true when you use TACACS+ authentication?
A. It prompts users to change their passwords when they expire
B. it saves a timestamped record of user activity
C. it controls the activities that the user is permitted to perform
D. it verifies the user identity.

What is the right answer? B or C ?

For the redistribution lab ,how do I find the OSPF process number

Hi, I passed the exam yesterday, 88x/1000. It was my last exam, so I am CNNP (all exams studied from this page)
I prepare it with private digitaltut, and the last week with the last chinesse dump (June) of MrBean to practice with the vce file.

Review all Drag and drops of this page (there are three quiz 20,13,6 questions). One quiz are on MPQ page. And review the MPQ page, and part 5 and 6 of new questions. All questions, D&D and labs in my exam are from here.

@netqaq11
IP SLA tracking are two similar questions:
state tracking > an OK return code means that the track’s state is up; any other return code means that the track’s state is down.
reachability tracking > an OK or over threshold return code means that the track’s state is up; any other return code means that the track’s state is dow.

@Cloys – How i said before, MrBean is your contact. Look on the last comment pages and you can find the email address to contact it.

@ccnp
I think the correct answer is B.
C answer say “contols the activities”, Maybe this answer is correct for authorization. Accounting only save the user activity, but no check what the user do. So, in my opinion B is correct.

Good luck for all!!!

Good morning Vietnam!
Hi guys, I will take my exam next week, the July_2019 dump of digitaltut still have missing questions like the DRAG and DROP for TTL, ICMP Redirect and for IP NHRP shortcut etc… Can someone share their answers for these set of DRAG and drops? or if you can complete the question with choices? Thanks guys!

@jsq, thank you for the explanation.
I guess we need to pay attention to this question.
1 – If it refers to the ip spla for the state operation = When tracking state, an ok return code means that the track’s state is up; any other return code mean that the track state is down.
2 – If it refers to the ip sla for the reachability operation : When tracking reachability, ok or overthreshold return code means that the track’s state is up, any other return code means taht the tracks state is down.

@Micheal Scott, can you share the july dump please? Thank you!

I passed today with 876. Most questions where multiple choices.
2 Labs – PBR and Redistribution EIGRP and OSPF
3 drag and drops found also here in digi tut
The total exam question was 55 questions and it took me 40min for the whole exam
I received most from here in digi tut + spoto dumps most of the questions were from NUQ5,6 and Spoto dumps. I saw 1 new question but can’t really remember.

I’m planning to sell my reviewer i created a couple of vce files for myself like MCQ and DnD
portable VCE application to run VCE files
VCE silver application apk for android to review anywhere using a smartphone
Portable Gns3 and ios to run The labs in any windows pc at least 4gb ram
Securecrt portable and installer
a couple of PDF files from dumps in spoto / certbus /
ccnp pdf book how to master route but did not read it.

if I can answer your question or want my advice message me

luibaon123 google email

Could someone please share the july file, that would be very much appreciated.
Thank you,
Best Regards

Route exam Pass today with 820/1000, all the questions from this site but about 10-12 new question which I didn’t see here may be newly updated in July.

labs : PBR, OSPF evaluation, redistribution all drag and drops from here.

Good luck guys and thanks digitaltut team for your tremendous work.

How can I get Spoto dumps please?

What is spoto dump?
If someone could kindly share the july file that would be very appreciated.
Thank you

anyone just recently passed the exam? may i know which dump to review?

Best CCNA exam preparation
Best CCNP exam preparation
Best CCIE exam preparation
Best CCIE lab exam preparation
Best cissp preparation
Provide Cisco R&S Security
Collaboration
Wireless
Data Center
Service Provider
Design and CISSP

What is the answer to this question ?
Two aspects of an IP SLA operation can be tracked: state and reachability. Which statement about state tracking is true?
A. When tracking state, an OK return code means that the track’s state is up; any other return code means that the track’s state is down.
B. When tracking state, an OK or over threshold return code means that the track’s state is up; any other return code means that the track’s state is down
C. When tracking state, san OK return code means that the track’s state is down; any other
return code means that the track’s state is up.
D. When tracking state, an OK or over threshold return code means that the track’s state is down; any other return code means that the track’s state is up.

Digitaltut says it’s “B”.
Chinese dump, pl and dexters says it’s “A”.