Share your ROUTE v2.0 Experience
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Hi tech!!
I think Tut is correct!!
http://www.cisco##zine.com/using-ip-sla-to-change-routing/
http://www.##firewall.cx/cisco-technical-knowledgebase/cisco-routers/813-cisco-router-ipsla-basic.html
*: remove “##”
For any of you that need them, here are ALL the dumps I studied from and passed. Also use digitaltut site, very recommended:
http : / / www. mediafire . com /folder/ds99ccsu2ravgyy,xchxdxvqyasa92z,8d7tjnrqmfvaqxd,54e6kk6501q1ebo,uxoo6fb8d2ad2b8,8qqcmj73gnsth0h/shared
(no spaces)
The link will be available for 10 days because the account is a free one. So please re-share afterwards for those who need them also.
Hi tech!!
Sorry, I was wrong!!
I read carefully the question that “Which statement about state tracking is true?” “B. When tracking state.” It is not about “reachability” tracking.
So, “A” is correct, I think!!
TarouUrashima and hurdor both are fake
Don’t use TarouUrashima and hurdor FAKE DUMPS
TarouUrashima and hurdor both are fake
what dumps is more reliable? the chinese dumps or the ROUTE_July_2019 of digitaltut?
A network engineer is enabling RIPng on a new customer link. Under which configuration mode is RIPng enabled?
A. Global
B. Router
C. Interface
D. IPv6
Answer: C
Customer enabled new link to partner using RIPng, how and where is RIPng configured?
A. router mode
B. interface mode
C. global – (config)#ipv6 router rip “RIPNG”
Answer: C
different how it is constructed but the thought is there, which one is correct? GLobal or Interface? both Q and A are present in pdf.
Hi @LebronTOs
Normally the questions have more informatiion, and the point is to find the detail on the question.
The question context tell you that you have RIPng working on router, and you need to activate on a new interface to a new customer. So the asnswer will be activate RIPng on Interface.
If the context refer that you activate RIPng on the device for a new customer, but don´t tell that RIPng is still running on the device, the answer will be activate on Global.
Hope it helps!!
I had the same thought @LebronTOs.
IMO It’s difficult to say because both questions refer to “new customer link” or “new link to partner”, could botch be Int or Global for me.
If someone have the file from july and is looking for the chinese file, dexter, digital from march, april and june please contact me
netqaq11 * o u tlook * com
I’m taking my Route exam on friday any suggestions on the dumps i’ll be reviewing?
The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset
According to this website the answer is ACD.
I believe that the answer should be B,C,E.
Thought?
ask question guys, packet trace is still available for route 300-101 labs ?
Can anyone recommend a network+ site for practice and dump?
@TarouUrashima and hurdor both are fake
they actually are not fake, and if they are… I wont do so well on my test. I grabbed them from another user here since we were studying and just passing them out for free, since theres a lot of peeps trying to sell theirs and thats not cool.
so…bleeeh
hurdor is right, these files were shared a couple of days ago by a user called ciscoR.
There’s only the july dump missing from there.
I went to the exam today and it was successful!
Experiment: OSPF CASE, Route-map, EIGRP_OSPF_Redistribute
P:pass
H:hot
I used the dump of the PH to pass the exam.
I passed route exam today…got 8** marks..I only refer the route_june_2019 community dump..that dump is still enough to pass..
More than 5 drag & drop i got..all are in the Route june dump..
Loaded 55 questions..!
Labs are same..!
@CENGA
Hi,
Congratulations.Could you please send me “june 2019 dump”?
faran2019kb @ yahoo .com
many thanks
May pinoy ba dito?
Yes there is pinoy here. Magttake ka ng route?
Dear All user Cloys and Nono is same person
Question and answering by same person but with different name
this is fake person trying to fool trying selling outdated dumps
please share the new question you find passing the exam so can update the digitaltut pdf
Hi everyone! My exam is near, I need to know for those who took the exam if you perform
“route-map pbr permit 20”
“exit”
according to digitaltut, it’s not required. I hope someone can reply, Many thanks!
btw I’m pertaining to the IP SLA LAB thanks!
@CENGA
Hi,Congratulations.Can you please send me the “june 2019 dump”?
urahatungoda @ gmail .com
Thank you
Passed 864 just now, only studied mcq and new Q. Got cold blooded when I saw composite questions (5-10q) on exam coz I didn’t study those. Get premium as premium user get updte on website, pdf gets updte late so dont risk ur 300$. Also u can practice labs, dnd and mcq via flash.
Labs pbr, redistri case2, ospf eval (r1-r3 is non broadcast)
Thanks digitaltut, they are responsive. Off to tshoot now
Hello Guys
I prepared for exam from Most Popular Questions and New updated questions 5 and 6 is it enough? or do i need to study all the old route questions included in june file?
any1 who recently took the exam pls share your experience
@LebronTo congratulations mate, coud you please advise did you study Route_July_2019 and how valid the pdf is ? however i am also the premium member.
2rd do you have the vce formatted file for the pdf
Hey everyone,
I got the CCNP Route exam on Friday. Hope it goes well and I’ll let you know the questions and labs that I have
Cheers
good luck theboom89
@ theboom89 good luck
Friends!Hi! Can u send me “june 2019 dump”?
glhome @ yandex . ru
many thanks
Hello all, could you please send me the “june 2019 dump”?
urahatungoda @ gmail.com
Thank you,
@theboom89 GOOD LUCK
PLS Share everything in Exam Thank
Hello just finished my switching exam and need to start on route.
Send the stuff at
puneet _ ow @ hotmail . com
(of course no spaces)
Is there any body how can guide me how to get the flash version of D & D questions
I am a premium member of tut
Thanks
I passed the CCNP Route 300-101 by just studying the Route June 2019 pdf provided by digital tut. I encounter around 3-5 new/old questions not really sure but they’re answerable.
Lab : PBR, EIGRP-OSPF Redistribution, OSPF Sim. No need to type write/ copy startup-config etc. since the commands don’t work.
Drag and drop: AAA, IPv6, ACLs, etc.
All/Majority of the questions are really found in the Route June 2019 pdf by Digitaltut. I’ll try to upload the file later. Good luck to all that will take this exam.
@Workingrouter did u studied the old questions from june file or just most popular and new updated 5 and 6?
Just study the whole file dude, you can manage to do all the 450 pages in 2 weeks if you really want it
@Workingrouter
congrest BRO
do you have VCE file
@MT @Workingrouter
Where do i find this pdf june 2019??
Can someone please email me the latest ccnp route dumps
my exam is next week
thanks
a.shareef2000 @ gmail
https :/ / ***www. mediafire.com/f ile/ 4od833l6ow5604l/ ROUTE_July_2019.pdf – Remove 3 stars * and spaces.
I’ve scanned that file and it seems that it just added 3 pages from the Route June 2019 pdf. Maybe some new/old questions. I just studied the Route June 2019 pdf and I passed. Try to memorize/be familiar with the questions and answers to be sure.
Please, Can somebody pass me the tests?
j o t a l o p z @ h o t m a i l doc c o m
Thank you DIGITALTUT!! Damn so thankful I passed the exam today with score of 8**/1000. I only refer to digitaltut dumps and it is enough for you to pass. All questions were on their dumps, 1 new D&D, and PBR, Redistribute, and OSPF Simlet for my Labs.
NOTE: Some of the digitaltut’s answer were wrong so it’s for you to figure it out and study! Good luck guys!
HI
Just now passed EXAM 8xx,
LAB (Redistribute-PBR-OSPF EVAL)
all from here
GOOD LOCK
thank you very much @Workingrouter..
Congratulations for every one who has passed the exam…
Dumps….use networkinnng v2, 2018 dec and Chinese dumps.
Note:new MQ like 10are available in Chinese dumps
@EMAD-MAX. That’s very true. I also got the same labs. All the best guyz