Share your ROUTE v2.0 Experience

Doublle post from earlier

DnD in below w. 477Q , Kikavich corrected

https:// drive . google.com/drive/folders/1UyTdhAq3k2qn-pOwZ41Bpv-FmA7rmKgu

Kikavich
https:// drive . google.com/drive/folders/1UyTdhAq3k2qn-pOwZ41Bpv-FmA7rmKgu
All in one
https:// www . dropbox.com/s/oqd7dept3tdg1vy/all%20in%20one.vce?dl=0
jazzy + prince
https:// drive . google.com/drive/folders/1zPsB1wW8QtA8ThFgI_qKBhSXr8reOJKx
https:// drive . google.com/drive/folders/1fKVLXnpMrjLgxMna8wkazos1YV09XzVZ

Just remove the spaces

@me the D&D in Kivach is always cut at the end. please do you have a document with a good D&D

Hi me,

You are the life saver!!
Thank you!

Who can send the (ccnp 300-101) latest update

Who can send the (ccnp 300-101) latest update

It looks like the sims changed, can anyone confirm which ones they are now?

Hi guys,

Pass the exam today.
SIM: eigrp ospf redistribution, eigrp stub, ipv6 ospf virtual link.
Dnd: frame relay multipoint, AAA, GRE, copp & mpp

Dump is still valid (All in One Kikavich, prince 91) abt 2-3 new qns.

Thanks everyone and gd luck.

Can you send Kavick dump (PDF) ,

Which statements indicate a valid association mode for NTP synchronization?
A. The client polls NTP servers for time.
B. The client broadcasts NTP requests.
C. The client listens to NTP broadcasts.
D. The client creates a VPN tunnel to an NTP ser
E. The client multicasts NTP requests.
Answer A,C

Hi anyone with the ccnp 300-101 and switch Lab manual version 7 please email me at fasto123 at yahoo dot com. Will appreciate it. Also if you can share with me latest IOS images to use in gns3 please.

@ME,
Many many thanks. you are the real savior.

Hellooooooooo

all in one 564Q is enough for pass the exxam?

any one planning for exam

Hellooooooooo

all in one 564Q is enough for pass the exam?

Helloooooooo
all in one 564Q is enough for pass the exam?

Hi, anyone took exam today?

Passed today…woo hoo! 85x
DND – FR (setting up interfaces), new AAA (easy to figure out), NAT64/NPTv6, IPv6 security, GRE
Labs – EIGRP stub, OSPF virtual links, redistribution

About 15-20 questions not in the dumps, of those about half were pretty simple if you know the concepts…Good Luck!

I need a CCNP route 300-101 valid dump.

@Bid Daddy,
Will you please share new 15 question if you remember any? Thanks.

DOWNLOAD RIGHT NOW:
PASS within a week:

https://docs.google.com/document/d/1GyGH0VZq6XcdRI7nHBLHiu_0gIb1Vjd3cxbyS64VEWc/edit

I passed today. Thanks goodness, will provide info and which dumps I used later.
Total score was 845, was scared because there were plenty of questions that aren’t in the dumps.
Let me know if you have questions.

@CallMeDaddy

congrats for passing
please share with us any new questions , and the sims /dnd you got

regards

Also, I created the labs in the lastest GNS3 format, if anyone would like a copy, tell me something funny!
They all work, but PBR needs some work

Does anyone have study material for the DnDs?

Hi guys,

Passed today with score 911/1000.

3 Lab Sim: EIGRP/OSPF Redistribution, OSPFV3 Virtual-Link, EIGRP Stub
5 D&D: AAA, GRE, Frame-relay(multipoint), IPV6 traffic filter/access-class, COPP/MPP

Encountered couple of new questions related VRF lite, Stateful/stateless nat64, DHCP etc.

One of the new question asking which routing protocol will advertise static route even without redistribute static.

Goodluck to all!

@ Big Papi

“Want here the joke about UDP” The problem with UDP jokes is that YOU don’t get half of them!

Please share the GNS3 Labs. {email not allowed}

Thanks,
Shaun++

@all + exam passers

Would somebody be so kind to share the new 15 questions please? Thanks!

can any help us the latest dumps for 300-101?

Hi!

studying all in one VCE + the questions here. Would it be enough? The PDF questions of all in one have like 50 DND and many many questions… Aren´t they old ones?

Hi all,

Please share your latest dump . Thanks a lot
re_hariet yahoo dot com

@CCNO route exam

which dumps u referred?
if we referr digital tut only can we pass??

Thank you @Anonymous
Indeed, Youki’s dumps is still exam
I passed the exam today

@Julien

where i can find Youki’s dumps

@Jeff Goeritz

Please

kindly

upload

the

NEW

Pass Leader

300-101

dumps

with

626q

!!!

Thanks

in

advance

!!!

+1

@Jeff Goeritz

Please

kindly

upload

the

NEW

Pass Leader

300-101

dumps

with

626q

!!!

Thanks

in

advance

!!!

planning for next tuesday. I hope all will goes well

@networker , Can you share your exam experience about new question after your exam

Just passed the exam this morning 890 / 1000
Delighted is an understatement

All the Drag and Drop files are sufficent
The All in one is sufficent to cover 60% of exam questions
3 LABS – OSPFv3 Vitual Link, EIGRP Stub, OSPF to EIGRP Redistribution
4 DND, Frame-relay, Copp v MPP, Tunnels, IPv6 Filter and Classes

Its not enough just reviewing the questions from this site
Make sure you know DMPVN, EVN, IPV6 (DHCPv6, filers, classes,NAT64, NPT64) as it looks like the exam isstarting to take more and more topics that are been dropped down from the CCIE R&S

One new question about EIGRP Variance – you have to work out which variance value to select based on a diagram proivided had me stumped
One new question about best place to position a netflow server (user edge, provider edge, distribution edge)

Onto the 642-883 SPROute exam now…………..anyone any recommendations for threads like this

Oh, the exam is becoming more and more difficult, so we need new questions, anyone can share new ones, pls :(

@crowbar
Congrats!!
What is about questions post on preview pages 148-155?
Thanks!

crower are you talking about this question???any confirms

Which location is traffic from IP SLAs?
A. core edge
B. access edge
C. WAN edge
D. Distribution edge E. User edge
Answer:WAN edge

@crowbar:

NetFlow Activation and Data Collection Strategy:
NetFlow (network flow) is an input side-measurement technology that allows for capturing the data required for network planning, monitoring, and accounting applications. NetFlow should be deployed on edge/aggregation router interfaces for service providers or WAN access router interfaces for Enterprise customers. Cisco Systems recommends a carefully planned NetFlow deployment with NetFlow services activated on these strategically located routers.

Hi Guys,

Please share the latest dump.

Anyone who passed exams can add more new questions compared to these below:

Q1.
which purpose of the AAA accounting feature is true when you use TACACS+ authentication ?
a. It prompts users to change their passwords when they expire
b. it saves a timestamped record of user activity
c. it controls the activities that the user is permitted to perform
d. it verifies the user identity.

Ans: B

Q2.
Which command configure a default authentication list that uses a local database and a case-insensitive username ?
a. aaa authentication exec CONSOLE group local-case if authenticated
b. aaa authentication login CONSOLE group local
c. aaa authentication login default group local
d. aaa authentication exec default group local-case

Ans: C

Q3.
Which task you perform to enable a point-to-point Frame Relay connection ?
a. Configure the encapsulation type
b. Disable inverse ARP
c. Enable inverse ARP
d. Configure static address mapping

Ans: A

Q4.
If device R1 has 1-Gigabit and 10-Gigabit Ethernet interfaces, which command do you enter so that it takes full advantage of OSPF costs ?
a. R1(config-router)#auto-cost reference-bandwidth 10000
b. R1(config-router)#auto-cost reference-bandwidth 10000000000
c. R1(config-if)# ip ospf cost 10000000000
d. R1(config-if)# ip ospf cost 10000
e. R1(config-route-map)#set metric 10000
f. R1(config-route-map)#set metric 10000000000

Ans: A

Q5.
In which two areas does OSPF send a summary route by default ?
a. NSSA
b. Backbone
c. Totally stubby
d. Stub
e. Normal

Ans: D, C

Q6.
Which LAN feature enables a default gateway to inform its end devices when a better path to a destination is available ?

a. HSRP
b. ICMP unreachable messages
c. ICMP redirects
d. Proxy ARP

Ans: C

—————————————————————
1.Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters
Ans: A, B, E

2.Which two features ara added in MSCHAP Version 2
a. Backwards-compatibility with MSCHAP version 1
b. Using the MD5 hash for stronger security
c. Ability to change an expired password
d. using 3 way handshakes for authentication
e. mutual authentication between peers
Ans: C, E

4.What is the default authentication in RIPv2 when authentication is enabled
a. SHA1 authentication
b. Enable password authentication
c. Plaintext authentication
d. MD5 authentication
Ans: C
—————————————————————
1. Where must a network engineer configure the ip helper-address command on a router
a. On the interface that will receive the broadcasts
b. On the DHCP configuration
c. the interface that is closed to the destination DHCP server
d. on the global configuration mode
Ans: A

2. Which feature can be used to reduce the number of ICMP unreachable message egressing a router
a. uRPF
b. ICMP rate-limiting(upendra)
c. ip unreachables command
d. Asymmetric routing
Ans: B

3.What happens when a router receives a route with an administrative distance of 255
a. The router installs the route as the most preferred path in the routing table.
b. The router installs the route as the least preferred path in the routing table
c. The router becomes the feasible successor for the route
d. The router is unable to install the route into the routing table
Ans: D

4. A network access serve using TACACAS+ for AAA operations receives an error message from the TACACS+ server. which action does the network access server take next ?
a. It attempts to authenticate the user against RADIUS
b. It restarts and attempts to reconnect to the TACACS+ server
c. It rejects the user access request the
d. It checks the method list for an additional AAA option
Ans: C

1. multicast application must be accessible between sites, but not be accessible outside of the organisation. Based on the scoping requirements, the multicast group address for the application will be allocated out of which range ?
a. FF00::/16
b. FF08::/16
c. FF02::/16
d. FF0E::/16
Ans: B

2. Which routing protocol searches for a better route through other autonomous systems to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector
Ans: C

3. What are the two benefits of BGP peer groups
a. support groups of paths
b. A configuration change can be applied simultaneously to all peers in the peer group
c. optimize backdoor routes
d. updated via multicast
e. each neighbour in a peer group can have different inbound BGP Policies
f. they use soft updates to minimize bandwidth consumption
Ans: B, F

4. true statement about conditional debugging
a. limited to Ethernet, serial, and multilink interfaces
b. generates debug messages only for packets entering the router
c. limit the output to a specific interface
d. support only one condition at a time
Ans: C

5. VPN support for IPv4 and IPv6 address families. Which command enables a VRF that supports these requirements?
a. Router(config-vrf)#route-target 004:006
a. Router(config)#ip vrf CUSTOMER
a. Router(config)#vrf definition CUSTOMER
a. Router(config-vrf)#rd 004:006
Ans: C

6. what are the two correct statements about enable secret and enable password command
a. the enable password command has a strong encryption algorithm than enable secret
b. if both commands are missing from the global configuration, vty lines use the console password
c. the enable secret command is backwards compatible with more versions of IOS
d. the enable secret and enable password commands must be used together
e. the enable secret command overrides enable password
Ans: C, E

7. Which feature is supported with stateful NAT64 ?
a. IP multicast
b. NAT44 and NAT64 on the same interface
c. VFR
d. FTP and ICMP on an application layer gateway
Ans: C

8. which of the following situations results in a routing loop ?
a. when you have a single point of redistribution
b. when you use NAT translation on the edge of your network
c. when you implement contiguous IP routing blocks
d. when you implement noncontiguous IP routing blocks
e. when you have multiple points of redistribution
Ans: E

1
Which two tasks must you perform to configure a BGP peer group ?
a. Configure the soft-update value
b. Set the advertisement interval
c. Assign neighbours to the peer group
d. Activate each neighbour
e. Activate the default route
Ans: C, D

2
which DHCP option enable to permit static routes in a DHCP environment ?
a. option 33
b. option 67
c. option 13
d. option 66
Ans: A

3
which condition prevents the establishment of a DMPVN tunnel between two spokes ?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.
Ans: C

a question for RIPv2 how long a static route remains if the point to point interface is down.
a 30s
b 60s
c 180s
d 240s
Answer: D (flush time)

In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
ANS: B

1. HOW DEFAULT route config?
a- IP ROUTE command directs to next hop
b- IP ROUTE command directs to next hop and interface
options c and d

ANS: A ?

2. how ospfv3 make neighbourship ?
a- ipv6 neighbourship along with ipv4 router-id (something like that…)
b- ipv6 neighbourship under interface command.
Can’t remember option c & d.
ANS: A, B ???

Just got out of the exam hall but failed. The questions above are valid but u need to confirm if the answers are right. i made a silly mistake in d lad tho. mine was redistribution, ospf and eigrp stub

@OSPF I’m sad to hear that. Can ALL IN ONE help us to pass. What do you think ?

ospf
dont lose heart be ready for next time

How long does it take to learn 560Q’s? I guess you have to go through it 3 times to memorize the stuff?

The questions @ Jimmy are valid. However, i have issue with the options if they are all correct as i am not too sure with some. I took the exam 29th of June and failed. i made some mistakes in options as the options were twisted. Also, i was stressed before taking the exam. All the questions are valid and some of the answers correct. but we need to validate the options. I am taking the exam again very soon. This site has been really helpful. it helps to better prepare. Thank you guys.