Home > Share your ROUTE v2.0 Experience

Share your ROUTE v2.0 Experience

January 22nd, 2015 in ROUTE 300-101 Go to comments
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here.

The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.

Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

Note: Posting email is not allowed in the comment section.

Your posts are warmly welcome!

Comments
Comment pages
1 224 225 226 227 228 391 1008
  1. Mİka
    October 17th, 2018

    https: // drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

    17.10.2018
    valid dumps. good luck

  2. Switch_300_115
    October 17th, 2018

    I can’t find any valid study material for the switch exam on the switch forum…does anyone have any references?…thanks

  3. Olaka
    October 17th, 2018

    @ Mika please did you read all questions from netttworrrking or just the firs 195?

  4. Anonymous
    October 17th, 2018

    @mika congratulation!!! Which labs??

  5. Alex88
    October 17th, 2018

    I Will take exam in a few minutes!!!

  6. Alex88
    October 17th, 2018

    195 q still valid, i take my exam a few minutes (17.10.2018) score 96x
    Labs ospf stub, eigrp stub, redistribute ospf eigrp (case 2)
    All question and D&D its in 195q

  7. CCNP – Route
    October 17th, 2018

    Congrats Alex88,

    Did you remember how many D&D did you get in the exam and what are those? I am taking the exam in the weekend that would really help.

  8. Alex88
    October 17th, 2018

    @CCNP-ROUTE D&D:

    *frame relay LMI
    *Gre Feature
    *ACL Types
    *Urpf

    Same Labs from Digital tut

  9. aaa
    October 17th, 2018

    @alex88
    congratulation for your exam
    but you study only 195 question or all 700 question for the exam?
    thk so much for your reply

  10. ss
    October 17th, 2018

    @Alex

    Can you please tell that in Eigrp stub lab , have you summarized ip summary-address eigrp 123 10.2.0.0 255.255.0.0, you got two subnets on R3 ?

  11. man of steel
    October 17th, 2018

    can some one send me @nneettwwoorrkkiinngg dump in my email emadwais in hotmail.com

  12. Alex88
    October 17th, 2018

    @aaa : i am study only 195Q
    @ss : i have the same output from LABS
    Link: https://www.digitaltut.com/route-eigrp-stub-sim#more-30

    copy running startup config or WR its not support in all labs, but the proctor says “no matter, only click next for close labs”.

    sorry for my bad english, I hope I have helped you

  13. BATMAN
    October 17th, 2018

    hi please share the Netttttwooooorrrrrking 195Q..

  14. nneettwwrrookkiinnggg
    October 17th, 2018

    Hi All

    how have you been?

    my mail

    nneettwwoorrkkiinngg @ gmail.com

  15. Switch_300_115
    October 17th, 2018

    @nneettwwrrookkiinnggg….what’s up….would you happen to have any material for the switch exam?….can’t find anything solid in that switch forum

  16. RJL
    October 18th, 2018

    @nneettwwrrookkiinnggg thanks for your help, you’re awesome

  17. Zero Zero
    October 18th, 2018

    Nima

    What did you study to pass? Please share.

  18. NoName
    October 18th, 2018

    Which value determines the amnount of traffic that a network path can hold in transit?

    A. route cache setting
    B. maxsimum windows size
    C. badwidth delay product
    D. MSS

    Shouldn’t this be C ?

  19. Anonymous
    October 18th, 2018

    i just passed np route exam yesterday ,study only 195 question

  20. RJL
    October 18th, 2018

    @Anonymous ^ thank you for the update my exam is tomorrow.

    Does the lab sim allow you to do question mark if you do not know the full syntax?

  21. @Googleplex
    October 18th, 2018

    someone said they got Redistribute Ospf Eigrp (case 2) in their exam, does anyone know which one that is??? Please answer. Thanks

  22. @Googleplex
    October 18th, 2018

    PLEASE ANSWER!!!!!

  23. Anonymous
    October 18th, 2018

    @RJL – yes you can do question mark as well as tab.

  24. @Great
    October 18th, 2018

    Passed. all from 195 valid September questions; all labs from Digital Tut page. Best of luck to all of you.

  25. Anonymous
    October 18th, 2018

    @Great which labs did you get?

  26. Scott A
    October 18th, 2018

    @Mohammad Imran

    Please upload that full version Pass Leader 300-101 dumps with 739q!!!

    Thanks!!

  27. Alex88
    October 18th, 2018

    @googleplex

    https://www.digitaltut.com/route-eigrp-ospf-redistribution-sim

    If the link between R2 and R3 is FastEthernet link, we must put the command below under EIGRP process to make traffic from R1 to go through R3 (R1 -> R2 -> R3 -> R4), which is better than R1 -> R2 -> R4.

    R2(config-router)# distance eigrp 90 105

    R2:

    Conf t
    Router eigrp xxx
    Distance eigrp 90 105

  28. @Googleplex
    October 18th, 2018

    @Alex88 thanks for replying mate. i understand now, so that means if there’s a serial link, it would be case 1 right? Do we still put R2(config-router)# distance eigrp 90 105 or not?

  29. NEMIN
    October 18th, 2018

    can some one send me @nneettwwoorrkkiinngg dump to my email abatfcn @ gmail.com. Thnnk you in advance.

  30. ada
    October 18th, 2018

    NEW QUESTION 676
    Which command sequence can you enter on a router configure Unicast Reverse Path Forwarding in loose mode?

    A. Interface GigabitEthernet0/0
    ip verify unicast source reachable-via loose
    B. Interface GigabitEthernet0/0
    ip verify unicast source reachable-via all
    C. Interface GigabitEthernet0/0
    ip verify unicast source reachable-via any
    D. Interface GigabitEthernet0/0
    ip verify unicast source reachable-via rx

    Answer: C

    NEW QUESTION 677
    Which SNMP model and level can provide DES encryption?

    A. SNMPV2 noAuthNoPrry
    B. SNMPV3 authNoPriv
    C. SNMPV3 authEn
    D. SNMPV3 noAuthNoPrv

    Answer: C

    NEW QUESTION 678
    Which value determines the amnount of traffic that a network path can hold in transit?

    A. route cache setting
    B. maxsimum windows size
    C. badwidth delay product
    D. MSS

    Answer: D

    NEW QUESTION 679
    Which location within the network is preferred when using a dedicated route for Cisco IP SLA operations?

    A. user edge
    B. provider edge
    C. access edge
    D. distribution edge

    Answer: D

    NEW QUESTION 680
    Which protocol can you use to remotely install an IOS on a Cisco switch?

    A. SFTP
    B. NetFlow
    C. FTP
    D. SNMP

    Answer: C

    NEW QUESTION 681
    A user is attempting to authentication on the device connected to a TACACS+ server but the server require more information from the user to complete authenticaton. Which response does the TACACS+ daemon return?

    A. ACCEP
    B. ERROR
    C. REJECT
    D. CONTINUE

    Answer: D

    NEW QUESTION 682
    Which security feature can protect DMVPN tunnels?

    A. IPsec
    B. TACACS+
    C. RTBH
    D. RADIUS

    Answer: A

    NEW QUESTION 683
    What happens when two EIGRP peers have mismatched K values?

    A. The two devices are unable to correctly perform equal-cost routing.
    B. The two devices fail to perform EIGRP graceful shutdown when one device goes down.
    C. The two devices fail to from an adjacency.
    D. The two devices are unable to correctly perform unequal-cast load balancing.

    Answer: C

    NEW QUESTION 684
    Which two features were added in MSCHAP version 2? (Choose two.)

    A. Mutual authentication between peers.
    B. Using the MD5 hash for stronger security.
    C. Using three-way handshakes for authentication.
    D. Ability to change an expired password.
    E. Backward-compatibility with MSCHAP version 1.

    Answer: AD

    NEW QUESTION 685
    When an EIGRP router discovers a new neighbor, which packet type does the router send to help the neighbor build its topology table?

    A. Replies
    B. Requests
    C. Updates
    D. Queries

    Answer: C

    NEW QUESTION 686
    After configuring RIPng on two routers that are connected via a WAN link, a network engineer notices that two routers cannot exchange routing pdated.What is the reason for this?

    A. Either a firewall between the two routers or an ACL on the router is blocking UDP 521.
    B. Either a firewall between the two routers or an ACL on the router is blocking TCP 520.
    C. Either a firewall between the two routers or an ACL on the router is blocking TCP 521.
    D. Either a firewall between the two routers or an ACL on the router is blocking UDP 520.

    Answer: A

    NEW QUESTION 687
    A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?

    A. Global
    B. Router
    C. Interface
    D. IPv6

    Answer: C

    NEW QUESTION 688
    Which three algorithms can you configure with the ip cef load-sharing algorithm command? (Choose three.)

    A. per-packed
    B. Tunnel
    C. per-destination
    D. Universal
    E. Per-source
    F. Include-ports

    Answer: BDF

    NEW QUESTION 689
    Which tecnology supports overlapping IP address on a single interace?

    A. policy-based routing
    B. VRF-Lite
    C. On-Demand Routing
    D. QoS

    Answer: B

    NEW QUESTION 690
    Which two statements about ICMP unreachable messages are true? (Choose two.)

    A. They are sent when a route to the destination is missing from the routing table.
    B. They can be enable and disable on a device only on a global level.
    C. They are sent when a destinatiason address responds to an ARP request.
    D. They include the entire packet so that the source can identify the process that generated the message.
    E. They include a poriton of the original data so that the source can identify the process that generated the message.

    Answer: AE

  31. Alex88
    October 18th, 2018

    @googleplex

    only if the link is ethernet the command is added,

  32. Pablo Oleas
    October 18th, 2018

    @Mohammad Imran

    Please upload that full version Pass Leader 300-101 dumps with 739q!!!

    Thanks!!

  33. beny
    October 18th, 2018

    Hello , I am looking for the new ccnp route dumps.
    is anyone has it ?

  34. sam
    October 18th, 2018

    please what is answer ?

    Which value determines the amount of traffic that a network path can hold in transit?

    A. route cache setting
    B. maximum window size
    C. bandwidth delay product
    D. MSS

  35. Soja
    October 18th, 2018

    Hello i have VCE exam simulator complete 2017(downloaded from the link). I am able to see crac file. I would really appreciate if anybody can guide me to open VCE player.
    Waiting for ur message,
    Thank u
    Soja

  36. Anonymous
    October 18th, 2018

    What is the role of a route distinguisher via a VRF-Lite setup implementation?
    A. It extends the IP address to identify which VFP instance it belongs to.
    B. It manages the import and export of routes berween two or more VRF instances
    C. It enables multicast distribution for VRF-Lite setups to enhance EGP routing protocol capabilities
    D. It enables multicast distribution for VRF-Lite setups to enhance IGP routing protocol capabilities

    Can you tell mee true answer

  37. King
    October 18th, 2018

    Which value determines the amnount of traffic that a network path can hold in transit?

    A. route cache setting
    B. maxsimum windows size
    C. badwidth delay product
    D. MSS

    Shouldn’t this be C ?

  38. Hammy
    October 18th, 2018

    NEW QUESTION 688
    Which three algorithms can you configure with the ip cef load-sharing algorithm command? (Choose three.)

    A. per-packed
    B. Tunnel
    C. per-destination
    D. Universal
    E. Per-source
    F. Include-ports

    Answer: BDF

    NEW QUESTION 689
    Which tecnology supports overlapping IP address on a single interace?

    A. policy-based routing
    B. VRF-Lite
    C. On-Demand Routing
    D. QoS

    Answer: B

    NEW QUESTION 690
    Which two statements about ICMP unreachable messages are true? (Choose two.)

    A. They are sent when a route to the destination is missing from the routing table.
    B. They can be enable and disable on a device only on a global level.
    C. They are sent when a destinatiason address responds to an ARP request.
    D. They include the entire packet so that the source can identify the process that generated the message.
    E. They include a poriton of the original data so that the source can identify the process that generated the message.

    Answer: AE

  39. JA
    October 18th, 2018

    Just passed my CCNP route a few minutes ago 195 is still valid. OSPF Lab is slightly different
    you must use a particular OSPF process ID and the IP addresses were different.

  40. ss
    October 18th, 2018

    @JA

    can you remember what IP addresses are changed in ospf lab ?

  41. funghet
    October 18th, 2018

    @nneettwwrrookkiinnggg

    hi man! thank you for your awesome work! can you share the vce password so we can correct some question, like drag&drop with loose/loose mode ? :)

  42. Jaroslaw Swiechowicz
    October 19th, 2018

    @Mohammad Imran

    Please upload that NEW version Pass Leader 300-101 dumps with 739q!!!

    Thanks!!!

  43. Alex Herreria
    October 19th, 2018

    Anyone kindly share the new version of premium Pass Leader 300-101 dumps with 739q???

    I found a lot of new questions have been shared by Pass Leader.

    Thanks all in advance!!!

  44. Anonymous
    October 19th, 2018

    When I have a pdf file from nneettwwoorrkkiinngg then I see at first page section “195Q” but these questions are not in hierarchical order, right? For example question Q137 (question about NTP) is from 195q and then we have question 695 from 195q.

  45. Haji
    October 19th, 2018

    @Anonymous,

    That is exactly what I have found out. not sure if someone can explain this. in my opinion, 195 should have been in one section.

  46. Anonymous
    October 19th, 2018

    the 195 is in order if you use the VCE

  47. Borysomierz
    October 19th, 2018

    When I have a pdf file from nneettwwoorrkkiinngg then I see at first page section “195Q” but these questions are not in hierarchical order, right? For example question Q137 (question about NTP) is from 195q and then we have question 695 from 195q.

  48. Borysomierz
    October 19th, 2018

    Yes, 195q is in order in VCE program – so when people say “195q is still valid, just passed” they mean 195q from VCE? NOT the first 195q from PDF?

  49. Haji
    October 19th, 2018

    @Borysomierz,
    Do you have the Pass for the vce by any chance? I opened it and is asking for pass.
    Thanks

  50. MiCis
    October 19th, 2018

    Passed CCNP route with a score of 9xx.
    nneettwwoorrkkiinngg 195q stil valid.


  51. Note: Please do not open any suspicious links (especially short links and links that need to remove some words to open) in the comment section above as they are usually spams and may harm your computer.
Comment pages
1 224 225 226 227 228 391 1008
  1. No trackbacks yet.