Share your ROUTE v2.0 Experience

@ Wanna Be please share the dumps on zingades22 at gmail dot com

@WannaBe >> Demo version of a+vce will just let me scan 30-50 questions per instance. What I did is after the 1st run, I will start on where I stopped.. I screenshot all the new questions, some of the questions aren’t new, they are only rephrased (from Jan2019).. You really need to understand the concept and you’re good to go. Thanks.

please share the latest dumps {email not allowed}

I passed it today with 8xx!
Route Jan 2019 is still valid. Questions exactly as per file, one new question about time synchronisation with distribute list.
EIGRP stub. OSPF virtual links. EIGRP evaluation sim.
Good luck all and see you next time!

@ Wanna or whoever please share the dumps on ccnproute555 at gmail dot com
Have test on next Wednesday
email and I will convert vce to pdf and email you back
Thank you

Thanks @GilasPilipinas..

mine was only 10 Questions then exam will exit, just done scanning 150+ Questions.. 300 more to go

Hi,
In which condition in OSPF standard area routers form adjacency but don’t share the routes with neighbours. Its Intra Area routes

@wanna be: Please do share the dumps to manu2488.@.g.m.a.i.l.c.o.m

@ wanna be , the vce. dumps on zingades22 at gmail dot com.

@ wanna be, please send vce. dumps on makhonyad @ yandex . ru

@ wanna be, please send vce. dumps on hugues*tanoh97@*gmail.*com

I will take my exam on next week. Sharing latest dump will be really appreciate. Thanks in advance. black . skeleton 0 @ gmail .com

@Wanna Be, Please share vce to lagun . amar . amar @ gmail . com

@ wanna be, please send vce. dumps on sherif . hamdy 29 at yahoo dot com

Company is deploying a multicast application that must be accessible between sites, but must not be accessible outside of the organization. Based on the scoping requirements, the multicast group address for the application will be allocated out of which range?
A. FF00:/16
B. FF0E:/16
C. FF02:/16
D. FF08:/16 —> correct answer . C is for only the link local

please can anyone verify if ROUTE_Jan_2019 is still Valid..Thanks

hi guys,

Yesterday I’ve passed CCNP Routing with 9XX, Sim were the same Eigrp stub, redistribution OSPF-EIGRP and one about an evaluate an OSPF network with 3 areas with 4 question. All questions are in this page, please be careful with answer, I recommend studying the official cisco guide then study each question to deepen the topic.

A network administrator is troubleshooting a redistribution of OSPF routes into EIGRP.

router eigrp 1
network 10.0.0.0
!
router ospf 1
network 172.10.0.0 0.0.255.255 area 0
redistribute eigrp 1

Given the exhibited commands, which statement is true.

A. Redistributed routes will have an external type of 1 and a metric of 1.
B. Redistributed routes will have an external type of 2 and a metric of 20.
C. Redistributed routes will maintain the original OSPF routing mettric.
D. Redistributed routes will have an deafualt metric of 0 and will be treated as reachable and advertised.
E. Redistributed routes will have an deafualt metric of 0 and will be treated as unreachable and not advertised.

ANS: B – Question is incorrect as per the configurations, don’t be confused. EIGRP was redistributed into OSPF not the other way around like what’s on the question.

Gooodluck!

@saji FF02 is for link-local multicast and FF08 is for organization local multicast

So D is correct

Congratulations!

300-101 exam passed on 22/Feb/2019!!! 860 points, the passing line is 790 now!!!

Total 53 questions. 4 Drag and Drop FYI: frame relay, ACL, AAA, DHCPv6.

Labs: eigrp case, eigrp stub, route-map

Mainly learned the latest Pass Leader 300-101 dumps (773q~~~NEW VERSION DUMPS), stable and valid enough for passing!

Good luck!!!

Please send me the latest dump of CCNP route {email not allowed}

Please send me the latest dump of CCNP route praneeth078.@.g.m.a.i.l.c.o.m

Can any one share me the latest dumps of CCNP (Route or switch) in below email? i will be very thankful. it’s urgent as my CCNA gonna expire soon and i need to fulfill my job requirement

muhammad _ tayyardanish at yahoo dot com
or
muhammad dot tayyardanish12 at gmail dot com

HI guys, anyone here who tried using exam collections premium vce file. The file only contains 189 questions. It’s a bit expensive but anyone can verify if this is legit? 189 questions are kinda to good to be true versus to an average of 500 to 700 questions.

HI guys, anyone here who tried using exam collections premium vce file. The file only contains 189 questions. It’s a bit expensive but anyone can verify if this is legit? 189 questions are kinda to good to be true versus to an average of 500 to 700.

Which three functionalities are specific to stateful NAT 64 (choose three)

a) it requires IPV4-transalable IPv6 address
b) it requires either manual or DHCPv6 based address assignment for IPv6 host
C) it helps ensure end-to-end address transparency and scalability
d) a state or bindings are created on every unique translation
e) it conserves IPv4 addresses
f) no constraints is put the number of endpoints due to 1:N translation

In my opinion DEF what do you think ?

HI guys, anyone here who tried using exam collections premium vce file. The file only contains 189 questions. It’s a bit expensive but anyone can verify if this is legit? 189 questions are kinda to good to be true versus to an average of 500 to 700 questions.

Just passed the exam today few hours ago with 889 score.. lots of new questions (maybe around 10-12 of 53 items) thou D&D and simulations are just the same here..

Sim: EIGRP stub, EIGRP OSPF Redistribution, OSPF Evaluation
D&D: 2 items NAT64, Config for PPP FR

Jan2019 I think will not be enough to pass the exam

——————————————————————————————
@speed, got that question on my exam earlier and yes DEF was my answer :D

LuckyOne how many questions was from Jan_2019?

@Danish,
Try study CCNA Security or WiFund, are easier than CCNP.

Passed, 86x

Labs: eigrp case, eigrp stub, IPv6 OSPF
D&D: NAT proces, ACL, uRPF and Radius / Tacacs+

about 7 new questions, premium member is enough too pass….

up to TSHOOT:)

Did examen MANY NEW QUESTIONS!

Need for valid dump please ?

Which two causes of latency are true ? (choose two)

a) High bandwidth on a link
b) Split horizon
c) Propagation Delay
d) Serialization Delay
e) Under-utilization of a link

CE, BE, or CD ? This is very confusing question. In Jan 2019 there is a CD answer. Is it correct ?

All, plan on taking the exam mid march. Where can I find the latest dumps?

@speed,
propagation delay – Amount of the time it takes head of the signal to travel from the sender to the receiver. ———travel time taken from Router 1 to 2.
Serialization delay – Time it takes for a packet to be serialized for a transmission on narrow channel such as cable. Time taken from Router R2 for the packet to put it output queue for transmission.
E-> BW under-utilization of a link – will not impact the latency because whether u send lower speed or opted speed (ex- 100mbps) still link gonna send the packet on the speed of 100mbps (it has to follow the clock speed) receiving router has to do the policing / queuing (if the u exceed the speed). even if u send the packet at 50mbps, means packet went to the other end at the rate of 100mbps but the Data size limited to send.
So my two cent answer is C & D

any one can comment of this answer

https://www.mediafire.com/file/miv0r7ras8p5u3d/ROUTE_Jan_2019.pdf

@Saji

thank you. I noticed that some questions in Jan_2019 are incorrect. I think this is the good idea to try share the most hard questions here. Also if someone remember new questions please paste it here ;) i can try help

Passed today with 8xx. 53 questions. About 5-7 questions are not covered in Premium member study material. All Drag and Drop (frame relay, ipv6 NAT stateful vs. stateless, ipv6 NAT64 vs NPTv6) and Lab (eigrp stub, eigrp & ospf redistribution, and ospf evaluation) are covered by Premium member.
In short, premium member is enough too pass. Not a big fan of Cisco playing with words, even you know the network concepts. Big thanks to Preminum membership.

@speed,
another wrong answered question on Jan_2019
Which two statements about ICMP unreachable messages are true? (Choose two)
A. They are sent when a route to the destination is missing from the routing table
B. They can be enabled and disabled on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a portion of the original data so that the source can identify the process that generated the message

Answer should be A & E
&&&https&&&:/&&&/www.oreilly.&&&com/library/view&&&/ipv6-essentials/0596001258/ch04s02.&&&html

Thank you Saji. I really appriciate your help. I think it will help a lot of people ;)

about half of the questions was still from Jan2019.. I’m not a premium member, maybe that’s why I got more new questions 😅..

I remember 1 new question was about TCP enhancement where you need to choose 3 from 6 choices..

I also got a question about redistribution of EIGRP into OSPF where Jan2019 answer In think is incorrect.. my answer is:
EIGRP appears as E2 routes & redistribute classful EIGRP networks

@ Dumps for all

You are fake. WTF no SIMS in exam ? Did you buy Cisco ?

Hi, @LuckyOne, may i know from which dumps you prepared for the exam, can you share link

@LuckyOne, The redistribution question asks about the behavior on the local router performing the redistribution.
Redistribution is taking routes from one protocol from the routing table and inserting in the “topology table” of the other routing protocol.
We also know only the best routes are placed in the routing table, in this case the EIGRP routes already in the routing table have a better AD (90) than the redistributed routes into OSPF (110). Other routers in the OSPF domain will have the E2 routes but not the Redistributing router.

Hope this helps

Hi all,
can some one send me Jan_2019 Dumps please (hugues*tanoh*97*@*gmail.*com)
Thanks

http://engineerarea.com/bbs/board.php?bo_table=certi <<site address
It's a Korean site, but there are many different kinds of dumps.

Is there any chance to download something from here ?

Which value determines the amount of traffic that a network path can hold in transit ?

a) route cache setting
b) maxsimum windows size
c) bandwidth delay product
d) mss

i suppose the correct answer is C. I am not sure.