Home > Share your ROUTE v2.0 Experience

Share your ROUTE v2.0 Experience

January 22nd, 2015 in ROUTE 300-101 Go to comments
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here.

The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.

Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

Note: Posting email is not allowed in the comment section.

Your posts are warmly welcome!

Comments
Comment pages
1 375 376 377 378 379 391 1008
  1. CiscoD
    January 16th, 2020

    Encase you don’t read the last comment on that url above:

    Ans:B
    Link local address is a special type of address intended for communications within the local network segment or a point-to-point connection. Routers do not forward packets with link local address. The link local address gets a FE80::/10 prefix.

    The OSPFv3 uses Link-local address to form neighbor adjacency by sending and receiving the hello packet to the neighbor router.

  2. ab
    January 16th, 2020

    @FIRE-Roxy tomorrow is mine

  3. winiton
    January 16th, 2020

    @CiscoDaddy I use de Dumps of this site!! Premium access MPQ , NU5, NU6 and Composite Quizz

  4. winiton
    January 16th, 2020

    Pass the test with premium account

    I have a Premium account valid until February 7th if someone interested who writes me private to the attached address, (remove pipe). The price is $10

    Thanks Network TUT!!!

    winiton|.r|@|gmail|.com

  5. @SIm
    January 16th, 2020

    Does anyone know if we get access to the full console for these SIM or have to memorize the commands? basically trying to understand if we will be able to use ? mark if we get stuck.

  6. ab
    January 16th, 2020

    @sim you will be able to use ? and tab mate

  7. ab
    January 16th, 2020

    @sim the thing that isnt documented anywhere is if they deduct points of for using it but in the real world we would use ? and tab so i dont think they would take points off you for it

  8. FIRE-Roxy
    January 16th, 2020

    Good Luck, ab

    you we do well :) study hard tonight give it ur best shot :)

  9. rs
    January 16th, 2020

    where do you find this “October dump”?

  10. Yuzarsif
    January 16th, 2020

    Alhamdulillah
    Passed CCNP Route 300-101 exam with 96*/1000, pass marks – 790
    Lab- Dumps are Still Valid
    MCQ – Some New questions so please read carefully
    # Don’t be panicked study hard and passed the exam with good score.
    BEST of LUCK
    Goodbye…
    Yuzarsif

  11. Anonymous
    January 16th, 2020

    Passed today 938/1000..

    Pass the test with a premium account

    I have a Premium account valid until February 13th if someone interested who writes me private to the attached address, (remove pipe). The price is $13

    Thanks Network TUT!!!
    almfark22|@|gmail|.com

  12. FIRE-Roxy
    January 16th, 2020

    @Yuzarsif

    do you remember the new questions and the drag and drop ?

    please share

  13. YEP
    January 16th, 2020

    what do you think is the best answer

    What happens when unicast flood protection is triggered on a VLAN?
    A. The VLAN is shut down
    B. Traffic on the VLAN is load-balanced across multiple links
    C. The VLAN is removed from the VLAN database
    D. Traffic on the VLAN is passed to another VLAN with lower load

  14. n00b
    January 16th, 2020

    @YEP
    what do you mean is the best? there is only one answer – shutdown the VLAN

  15. ab
    January 16th, 2020

    @Yuzarsif congrats did the ping work from R1 to R4 on ospfv3 without ipv6 ospf 1 area 0 in the loopback or did it already exist?

  16. HOP-COUNT
    January 16th, 2020

    A network engineer is enabling conditional debugging and execute two commands: debug
    condition interfaces serial0/0 and debug condition interfaces serial 0/1. Which debugging
    output is displayed as a result?

    A. Interface cannot be used as a debug condition.
    B. Output is display for both specified interfaces.
    C. Output is display for interface serial 0/1 only.
    D. Output is display for interface 0/0 only.

    Ans in the OCT Dump is B but other pages is C. HEEELP

  17. @HOP-COUNT
    January 16th, 2020

    B
    research for conditional debugging.

  18. @HOP-COUNT
    January 16th, 2020

    @HOP-COUNT

    Debug’s will continue to run until to tell it diferent, all you are doing is adding another debug for output in to logs.. You can terminate individual debug statements, or terminate all with one command also.

    I think it is B

  19. CiscoD
    January 16th, 2020

    Happy to help others, but also hoping someone can help me with providing the latest dump with the latest 10 questions if possible.. happy to pay providing it’s as expected.

  20. HOP-COUNT
    January 16th, 2020

    Thank you! I will take the exam tomorrow as soon as get the result I’ll post it

  21. Switch
    January 16th, 2020

    @all who have taken exam
    OSPF Eval Lab
    On question 3 looking for the SPF number can this command be used on the exam lab? It shows the SPF number for each area quicker.
    show ip ospf statistics
    R4#show ip ospf statistics

    OSPF Router with ID (4.4.4.4) (Process ID 1)

    Area 0: SPF algorithm executed 5 times

    Area 1: SPF algorithm executed 6 times

    Area 2: SPF algorithm executed 5 times

    Area 3: SPF algorithm executed 5 times

  22. FIRE-Roxy
    January 17th, 2020

    Hi Anonymous the correct answer is

    A. The VLAN is shut down

  23. Ssay
    January 17th, 2020

    @winiton, I send you un email I’am interessed by your account.

  24. Toto
    January 17th, 2020

    Can some one tell me if the Route-Oct-2019 is valid ? and it is enough ?

  25. Arsbo
    January 17th, 2020

    Hi,

    Is there some .vce file with Most Popular Questions, New Updated Questions – Part 5 and New Updated Questions – Part 6 questions?

    Thanks!

  26. Curadaçoo
    January 17th, 2020

    Hey guys,

    I just passed with 8XX.
    Digitaltut is enough to pass. Labs: OSPF Simulator (heads up the ospf had different area and different process just). EIGRP evaluation and OSPF evaluation.

    Just 3 D&D Same that I studied here.

    Bye

  27. Eng.Cisco
    January 17th, 2020

    I did my exam today, passed with 82X , very many new questions not in digitut/preminum. I guess the labs helped me pass. I did the labs perfectly ,
    OSPF Sim, IPV6 OSPF,EIGRP Evaluation.
    OSPF sim, i was able to ping the loopback address of Atlanta.
    IPV6 i was able to see the loopback of R4 on R1.
    DnD i got AAA commands(Auth, exec, proxy )
    I got Copp/MPP ,mGre,IpSec

  28. Eng.Cisco
    January 17th, 2020

    i remember one new que.
    The modes of URF
    I selected , Strict mode, loose mode ,VRF modes -Correct answer

  29. @Curadaçoo CiscoD
    January 17th, 2020

    @Curadaçoo – Congrats – where did you get the dump from pls?

  30. Anonymous
    January 17th, 2020

    I went through .All Labs
    MCQ, Updated 5&6

    Off to prepare TSHOOT

  31. Eng.Cisco
    January 17th, 2020

    I went through .All Labs
    MCQ, Updated 5&6

    Off to prepare TSHOOT

  32. Eng.Cisco
    January 17th, 2020

    I remember:

    Question 1
    What is the task you must perform when configuring SSH? (Choose two)
    A. Configure TACACS+
    B. Configure hostname
    C. Generate RSA key
    D. Disable telnet

    Answer: B C
    Question 3
    You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, which two design standards are appropriate for such an environment? (Choose two)
    A. A centralized DMVPN solution to simplify connectivity for the enterprise
    B. A dedicated WAN distribution layer to consolidate connectivity to remote sites
    C. A collapsed core and distribution layer to minimize costs
    D. Multiple MPLS VPN connections with static routing
    E. Multiple MPLS VPN connections with dynamic routing
    Question 21
    What happens when a router receives a packet with a TTL of 0?
    A. The router attempts to forward the packet along an alternate path in the route table
    B. The router sends an ICMP Time Exceeded Message to the host that sent the packet
    C. The router sends an ICMP Destination Unreachable Message to the host that sent the packet
    D. The router flags the packet and forwards it to the next hop
    Question 24
    Which limitation is introduced when you deploy RIPv2 on a network that uses supernet advertisement?
    A. RIPv2 supports only classful supernet networks
    B. RIPv2 supports only supernet component networks that use VLSM
    C. Supernets are not supported in a RIPv2 environment
    D. RIPv2 supports only classless supernet networks

    Question 30
    Which two statements about configuring OSPFv3 are true? (Choose two)
    A. The OSPFv3 routing process must be explicitly configured and enabled
    B. You can configure only one OSPFv3 instance per link
    C. OSPFv3 requires network statements for IPv6 prefixes
    D. OSPFv3 neighbors must be explicitly identified on NBMA interfaces
    E. OSPFv3 interfaces must be explicitly configured and enabled
    Question 33
    Which routing protocol searches for a better route through other autonomous systems to achieve convergence?
    A. Link-state
    B. Hybrid
    C. Path vector
    D. Distance vector

  33. Route Exam
    January 17th, 2020

    I passed the Route Exam on 1/16. Digital Tut along with textbooks from Kevin Wallace were enough to pass. There were roughly 10 new questions on the exam, some of which I found to be confusing. The labs here were very helpful. Thanks Digital Tut, and the authors of the site, for the great reference material.

  34. Minal ratita
    January 17th, 2020

    @Digitaltut, do you know if the following question are new for the 300 – 101, please help us with this

    What is the task you must perform when configuring SSH? (Choose two)

    A. Configure TACACS+
    B. Configure hostname
    C. Generate RSA key
    D. Disable telnet

    B C

    Which two pieces of information can you determine from the output of the show NTP status command?

    A. The NTP version number of the peer
    B. The configured NTP servers
    C. The IP address of the peer to which the clock is synchronized
    D. Where the clock is synchronized

    C D

    You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, which two design standards are appropriate for such an environment?

    A. A centralized DMVPN solution to simplify connectivity for the enterprise
    B. A dedicated WAN distribution layer to consolidate connectivity to remote sites
    C. A collapsed core and distribution layer to minimize costs
    D. Multiple MPLS VPN connections with static routing
    E. Multiple MPLS VPN connections with dynamic routing

    A B

    Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

    A. Specify the test frequency
    B. Enable the ICMP echo operation
    C. Schedule the ICMP echo operation
    D. Verify the ICMP echo operation

    B

    Which technology can combine multiple physical switches into one logical switch?

    A. HSRP
    B. VSS
    C. VRRP
    D. NHRP

    Which two features are compatible with port security?

    A. Voice VLAN
    B. SPAN source port
    C. DTP

    What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

    A. It provides reliable TCP transport
    B. It enable multiple servers to send video streams simultaneously
    C. It enable multiple clients to send video streams simultaneously
    D. It supports distributed applications
    E. It enable multiple clients to receive video streams simultaneously

    D E

    Which two statements about PAP authentication in a PPP environment are true?

    A. It is performed at the beginning of the session only
    B. It sends the password in clear text
    C. It uses a username with an MD5 password to authenticate
    D. It hashes the password before sending it
    E. It is performed at the beginning of the session and is repeated periodically for as long as the session is maintained

    B E

    Which two tasks should you perform to begin troubleshooting a network problem?

    A. Gather all the facts
    B. Define the problem as a set of symptoms and causes
    C. Implement an action plan
    D. Monitor and verify the resolution
    E. Analyze the results

    A B

    Which two pieces of information can you learn by viewing the routing table?

    A. Whether an ACL was applied inbound or outbound to an interface
    B. Whether the administrative distance was manually or dynamically configured
    C. Which neighbor adjacencies are established
    D. The EIGRP or BGP autonomous system
    E. The length of time that a route has been known

    E B

    Which two facts must you take into account when you deploy PPPoE interface?

    A. DDR idle timers must be configured to support VPDN loggin
    B. PPPoE supports a maximum of 10 clients per customer premises equipment
    C. DDR is not supported
    D. You must manually configure IP addresses on the PPPoE interface
    E. An individual PVC can support one PPPoE client

    B E

    Which fallback method can you configure to allow all AAA authorization requests to be granted if the other methods do not respond or return an error?

    A. Radius
    B. Enable
    C. TACACS+
    D. NONE

    D

    By default what is the maximum number of equal metric path BGP uses for load balancing?

    Up to a maximum of 6

    Which difference in the packet fragmentation feature between IPv4 and IPv6 is true?

    There is no fragmentation in IPv6 because it uses Path MTU Discovery in order to find the smallest packet size to the destination.

    Which LAN features enable a default gateway to inform it’s end devices when a better path to a destination is available?

    ICMP redirect

    The track objects in IP SLA and make sure that it is only up if all track objects are up, which method achieves that goal?

    A. AND
    B. OR
    C. XOR
    D. ???

    A

    With PCA and PCB and there are three routers between them and a different MTU value and they want a PCA to run an application with PCB and DF is set so we have to choose?

    A. MSS
    B. PMTU
    C. GRE
    D. ???

    A

    What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

    A. It provides reliable TCP transport
    B. It enables multiple servers to send video streams simultaneously
    C. It enables multiple clients to send video streams simultaneously
    D. It supports distributed applications
    E. It enables multiple clients to receive the video streams simultaneously

    D E

    Which two statements about PAP authentication in a PPP environment are true?

    A. It is performed at the beginning of the session only
    B. It sends the password in clear text
    C. It uses a username with an MD5 password to authenticate
    D. It hashes the password before sending it
    E. It is performed at the beginning of the session and is repeated periodically for as long as
    the session is maintained

    B E

    Which two tasks should you perform to begin troubleshooting a network problem?

    A. Gather all the facts
    B. Define the problem as a set of symptoms and causes
    C. Implement an action plan
    D. Monitor and verify the resolution
    E. Analyze the results

    A B

    Which two pieces of information can you learn by viewing the routing table?

    A. Whether an ACL was applied inbound or outbound to an interface
    B. Whether the administrative distance was manually or dynamically configured
    C. Which neighbor adjacencies are established
    D. The EIGRP or BGP autonomous system
    E. The length of time that a route has been known

    E B

    Which two facts must you take into account when you deploy PPPoE?

    A. DDR idle timers must be configured to support VPDN loggin
    B. PPPoE supports a maximum of 10 clients per customer premises equipment
    C. DDR is not supported
    D. You must manually configure IP addresses on the PPPoE interface
    E. An individual PVC can support one PPPoE client

    B E

    Which two features are compatible with port security?

    A. Voice VLAN
    B. SPAN source port
    C. DTP

    Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

    A. Specify the test frequency
    B. Enable the ICMP echo operation
    C. Schedule the ICMP echo operation
    D. Verify the ICMP echo operation

    B

    Drag and Drop

    A. TLL when reaches ‘0’ drops packets
    B. ICMP Redirect indicate to host that another route is available for a specific
    destination
    C. ICMP unreachable when destination is unreachable when IP is unable to give a
    packet to destination host due to some problem or issue
    D. ???
    E. ???

    How to implement local authentication using a list for case insensitive usernames.

    When does a Cisco router send an ICMP redirect?

    A. When the source and destination in the same subnet.
    B. When the packet is source-routed.
    C. When the packet’s destination has load-balanced entries in the route table.
    D. When the packet’s ingress and egress interface are different.

    A

    Define:

    A. IP NHRP redirect
    B. IP NHRP static

    C.IP NHRP (map)
    D.IP NHRP (shortcut)

  35. Minal
    January 17th, 2020

    @Digitaltut, do you know if the following question are new for the 300 – 101, please help us with this

    What is the task you must perform when configuring SSH? (Choose two)

    A. Configure TACACS+
    B. Configure hostname
    C. Generate RSA key
    D. Disable telnet

    B C

    Which two pieces of information can you determine from the output of the show NTP status command?

    A. The NTP version number of the peer
    B. The configured NTP servers
    C. The IP address of the peer to which the clock is synchronized
    D. Where the clock is synchronized

    C D

    You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, which two design standards are appropriate for such an environment?

    A. A centralized DMVPN solution to simplify connectivity for the enterprise
    B. A dedicated WAN distribution layer to consolidate connectivity to remote sites
    C. A collapsed core and distribution layer to minimize costs
    D. Multiple MPLS VPN connections with static routing
    E. Multiple MPLS VPN connections with dynamic routing

    A B

    Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

    A. Specify the test frequency
    B. Enable the ICMP echo operation
    C. Schedule the ICMP echo operation
    D. Verify the ICMP echo operation

    B

    Which technology can combine multiple physical switches into one logical switch?

    A. HSRP
    B. VSS
    C. VRRP
    D. NHRP

    Which two features are compatible with port security?

    A. Voice VLAN
    B. SPAN source port
    C. DTP

    What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

    A. It provides reliable TCP transport
    B. It enable multiple servers to send video streams simultaneously
    C. It enable multiple clients to send video streams simultaneously
    D. It supports distributed applications
    E. It enable multiple clients to receive video streams simultaneously

    D E

    Which two statements about PAP authentication in a PPP environment are true?

    A. It is performed at the beginning of the session only
    B. It sends the password in clear text
    C. It uses a username with an MD5 password to authenticate
    D. It hashes the password before sending it
    E. It is performed at the beginning of the session and is repeated periodically for as long as the session is maintained

    B E

    Which two tasks should you perform to begin troubleshooting a network problem?

    A. Gather all the facts
    B. Define the problem as a set of symptoms and causes
    C. Implement an action plan
    D. Monitor and verify the resolution
    E. Analyze the results

    A B

    Which two pieces of information can you learn by viewing the routing table?

    A. Whether an ACL was applied inbound or outbound to an interface
    B. Whether the administrative distance was manually or dynamically configured
    C. Which neighbor adjacencies are established
    D. The EIGRP or BGP autonomous system
    E. The length of time that a route has been known

    E B

    Which two facts must you take into account when you deploy PPPoE interface?

    A. DDR idle timers must be configured to support VPDN loggin
    B. PPPoE supports a maximum of 10 clients per customer premises equipment
    C. DDR is not supported
    D. You must manually configure IP addresses on the PPPoE interface
    E. An individual PVC can support one PPPoE client

    B E

    Which fallback method can you configure to allow all AAA authorization requests to be granted if the other methods do not respond or return an error?

    A. Radius
    B. Enable
    C. TACACS+
    D. NONE

    D

    By default what is the maximum number of equal metric path BGP uses for load balancing?

    Up to a maximum of 6

    Which difference in the packet fragmentation feature between IPv4 and IPv6 is true?

    There is no fragmentation in IPv6 because it uses Path MTU Discovery in order to find the smallest packet size to the destination.

    Which LAN features enable a default gateway to inform it’s end devices when a better path to a destination is available?

    ICMP redirect

    The track objects in IP SLA and make sure that it is only up if all track objects are up, which method achieves that goal?

    A. AND
    B. OR
    C. XOR
    D. ???

    A

    With PCA and PCB and there are three routers between them and a different MTU value and they want a PCA to run an application with PCB and DF is set so we have to choose?

    A. MSS
    B. PMTU
    C. GRE
    D. ???

    A

    What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

    A. It provides reliable TCP transport
    B. It enables multiple servers to send video streams simultaneously
    C. It enables multiple clients to send video streams simultaneously
    D. It supports distributed applications
    E. It enables multiple clients to receive the video streams simultaneously

    D E

    Which two statements about PAP authentication in a PPP environment are true?

    A. It is performed at the beginning of the session only
    B. It sends the password in clear text
    C. It uses a username with an MD5 password to authenticate
    D. It hashes the password before sending it
    E. It is performed at the beginning of the session and is repeated periodically for as long as
    the session is maintained

    B E

    Which two tasks should you perform to begin troubleshooting a network problem?

    A. Gather all the facts
    B. Define the problem as a set of symptoms and causes
    C. Implement an action plan
    D. Monitor and verify the resolution
    E. Analyze the results

    A B

    Which two pieces of information can you learn by viewing the routing table?

    A. Whether an ACL was applied inbound or outbound to an interface
    B. Whether the administrative distance was manually or dynamically configured
    C. Which neighbor adjacencies are established
    D. The EIGRP or BGP autonomous system
    E. The length of time that a route has been known

    E B

    Which two facts must you take into account when you deploy PPPoE?

    A. DDR idle timers must be configured to support VPDN loggin
    B. PPPoE supports a maximum of 10 clients per customer premises equipment
    C. DDR is not supported
    D. You must manually configure IP addresses on the PPPoE interface
    E. An individual PVC can support one PPPoE client

    B E

    Which two features are compatible with port security?

    A. Voice VLAN
    B. SPAN source port
    C. DTP

    Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

    A. Specify the test frequency
    B. Enable the ICMP echo operation
    C. Schedule the ICMP echo operation
    D. Verify the ICMP echo operation

    B

    Drag and Drop

    A. TLL when reaches ‘0’ drops packets
    B. ICMP Redirect indicate to host that another route is available for a specific
    destination
    C. ICMP unreachable when destination is unreachable when IP is unable to give a
    packet to destination host due to some problem or issue
    D. ???
    E. ???

    How to implement local authentication using a list for case insensitive usernames.

    When does a Cisco router send an ICMP redirect?

    A. When the source and destination in the same subnet.
    B. When the packet is source-routed.
    C. When the packet’s destination has load-balanced entries in the route table.
    D. When the packet’s ingress and egress interface are different.

    A

    Define:

    A. IP NHRP redirect
    B. IP NHRP static

    C.IP NHRP (map)
    D.IP NHRP (shortcut)

  36. Raspaspti
    January 17th, 2020

    I just took the freaking thing and passed with 8XX. I’d say about 20% of the questions were new I have been studying from this website for a month and all the questions I got from here I I’m sure I got right, the rest took some thought process. It’s not impossible just don’t rush through the ones you are not sure about. Consider all the possibilities before you hit NEXT. Good luck everyone. I just need to pass SWITCH now.

  37. ab
    January 17th, 2020

    Passed today 92% ospfv3 VL, eigrp eval and ospf, ospf one was a little strange all interface where set up and in the up up state and had the ip addresses set already just needed to set ospf process which was 90 and the area was 25 the stub and stub no summary setting.

  38. SkiP
    January 18th, 2020

    Passed today with 93x.

    I get some new questions (about 5-6), another ones mainly from MPQ and New5/6 (2-3 was reworded).

    One new question I remember: “BGP PEER configuration not working between 2 routers, which 2 answers corrects the problem?”

    One reworded question I remember: Which statement about the output of the show flow-sampler command is true? (Maybe same answers, but the “sampling interval is: 100” missing from the output)

    LAB: OSPFv3, OSPF Stub, EIGRP Eval (ip addresses, areas, process IDs was different, “copy run start” worked for OSPF lab, not worked for OSPFv3 lab)
    DD: AAA, NPTv6-NAT64, Stateful/stateless NAT64, Frame Relay LMI extensions, GRE

    Again: Important that you understand the concepts, not the hearth of answers!

    Thanks Network TUT, see you on TSHOOT guys!

  39. Sumit
    January 18th, 2020

    Can anyone please help me to download .vce file.
    I need to download version 2.6.1.

    Please contact me on {email not allowed}

  40. Toto
    January 18th, 2020

    Hi guys, (those who passed their exam)
    Can any one share whith me his member login and password ?

    thanking you

    univernet at FREE dot FR.

  41. Toto
    January 18th, 2020

    I ll take my exam next week
    please share your membre account!

    univernet at FREE dot FR.

  42. FOX
    January 18th, 2020

    Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?

    A. eBGP Multipath
    B. eBGP Multihop
    C. BGP Synchronization
    D. Public AS numbers

    A or B????

  43. thuli
    January 18th, 2020

    hi guys please share ete exam simulator .i have ete file which i cannot open
    ntombizodwa dot nunu at gmail dot com

  44. Anonymous
    January 18th, 2020

    Passed today 300-101
    Dump is valid. Labs are valid.
    Thanks digitaltut.

  45. Toto
    January 18th, 2020

    Can some one share with me accourt membre I ll practice Labs, I ll take my exam on 01/23.
    Please.

  46. @digitaltut
    January 18th, 2020

    Thank for your help, I just passed my 300-101 , labs are valid ( ospf sim ,ipv6 ospf virtual-link and eigrp eval ).
    My membership will end today whoever needs a ”Free” valid dumps ( VCE files) can email me at norbert d 83 @ gmail (dot) com

  47. Toto
    January 18th, 2020

    Hi Norbert,
    I have only ETE file.
    Can you share send me your membership please.

  48. kabe
    January 19th, 2020

    I have pass with 8xx, sim: ospf, eigrp eva, ospf virtual link; many dnd;
    some strange question with me:

    which nat command disable arp on an interface? (ip nat service, ip nat host-static, ip nat inside, ip nat outside) ?
    what ii role of edge port on EVN ?
    which protocol work with distribution list out ( rip, pbr, ospf, eigrp, is-is) ?
    limit function of statefull nat64 ?

  49. Tourist
    January 19th, 2020

    Passed CCNP route yesterday @9xx. All questions are from digitaltut. If you want to be sure to pass please study all MPQ, New question part 5 and 6 and also old composite questions. Thanks digitaltut for such wonderful forum and helping all to pass CCNP.

  50. @Tourist CiscoD
    January 19th, 2020

    Congrats Tourist. MPQ = Mulitple choice questions? New questions, where can I locate them please?

    R

Comment pages
1 375 376 377 378 379 391 1008
  1. No trackbacks yet.