Share your ROUTE v2.0 Experience

Any new questions in February?

Hi Oct dumps the questions everyone talking about?

Im passed today. 925
Eigrp sim
Ospf sim
Ipv6 virtual link sim

Many mpq and dnd from 9tut
Im used 2 dump
9tut and vce+
If onyone want vce+ just email, i wll sent for free ccowarrior2019 gmail com

Many mpq about DMVPN, nve

And dnd about AAA, radius tacacs

@Qiuw, NVE?

@monitor
https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/professional/ccnp-routing-switching-migration-tool.html

Hi,

Pass today with 83x all the dumps for this site are valid, highly recommended to buy a premium account, about 5 new questions.

Labs:
OSFP
OSFP IPV6 VIRTUAL-LINK
EIGRP EVAL.

D&D
FRAME-RELAY
NAT64
AAA
NAT

Can someone please clarify in EIGRP Eval SIM what is the correct answer for the Advertised distance:

Is it 1810944 or 333056? Its a little confusing reading the explanation in the SIM page.

Oil3h, the correct answer is 333056 because the question is about Advertised Distance and you can see in “show ip eigrp topology” [1810944/333056] = [Metric/Advertised Distance]. While the “show ip route” is Administrative Distance (AD) and METRIC [90/1810944].

hello,
could you please send any dumps available, it would be much appreciated.

tempo.ccnp.rs gmail com

thanks

Hi guys, mine is done today, just got over the line with 8xx marks, majority of questions were same or similar what you see here but a lot of them were reworded along with 8-10 new, specially NTP, OSPFv3 questions, none of them I have seen here, a few PPPoE questions but all from here.
Labs were
OSPF Evaluation Simulator – same
OSPF sim – with names, area ID, OSPF process ID and IP addresses changed
IPv6 OSPF Virtual Link Simulator – same
D&Ds
From D&D1 section – Q1 IPV6 NAT, Q5 Frame Relay, Q10 AAA
From MPQ – Q91 Frame Relay LMI
From NUQ5 – Q1 NAT64
From NUQ 6 – Q38 SNMP
Other questions were:
NUQ5 – 14, 22, 24, 38, 46
NUQ 6 – 40
MPQs – 177, 199, 10 (Similar), 188 (Similar), 2, 49
There was a question about RIPng – Answer is UDP Port 521 blocked by Firewall/ ACL

That’s all I can remember now, I would say that you will definitely need to have Networktut memebership to prepare, it will take you close to the passing line and if you get some of the concepts clear (Such as EVN, VRF, NAT64, NPT, DHCPv6, OSPFv3, NTP at least) then you will certainly pass your exam. Finally many thanks networktut.

Hı

I passed exam today. Premium account is valid. Thanks Digitaltut team.

passed last week. about 10-12 new questions.

lab: ipv6 ospf, ospf sim, eigrp eval
d&d: 2 AAA (both from MPQ)
studied only MPQ, NUQ5, NUQ6 and drag/drops. ipv6 and eigrp eval were exactly the same. ospf sim ip addresses/areas were different but same principle. No surprises.

Thank you to digitaltut, membership was worth it. good luck to all

@Anonymous do u remember new quizs?

-The Oct dump is still valid though some few new question i had never seen before(Cant remember)

Labs

-EIGRP Evaluation Sim – Same everything
-IPv6 OSPF Virtual Link Sim – Same
-OSPF Sim – Different IP adeddress (192.168.9.5/30 & 192.168.9.6/30, network address becomes 192.168.9.4, use this on both routers. Full command will be: network 192.168.9.4 0.0.0.3 area 44), OSPF process ID (84), Area (44). You should be able to ping loopback of Lynaic Router from router Portland. The router names have also changed.

Premium account available 10 dollar
Z f f r mohd @ g m a i l. C o m

Guys,

Taking exam tomorrow, any last minute suggestions, if i require premium account or oct 19 dumps are enough along with concepts.

roup radius :uses standard server
group tacacs :uses probrieatry
if-authenticated : allowed the request if authenticated
none The network access server dosen’t request authorization information
local: only limited set of functions can be authorized
Kerberos: uses predefined instance

+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

++ACL++
reflexive – must be named
standard – range 1300-1399
extended – closest to device
time-based – access to device at certain times
dynamic – telnet …

++Frame-Relay++
interface —–Space Blank —— Serial0/3/1
banwith 56
space Blank —encapsulation frame-relay
space Blank—- ip address
no shutdown
Space BlanK —interface Serial0/3/1.2 point-to-point
Space BlanK –ip address 10.17.0.1 255.255.255.0
Space BlanK –frame-relay interface-dlci 100
clock rate 2000000
shutdown

like that Esoooo??????

Please could someone help with this question and explain?

Q- Which device determines the MSS?
A- sendwsing host’s gateway
B- sending host
C- receiving host’s gateway
D- receiving host

Hello..

Guys anyone can guide here about the OCT pdf file. Is it enough to do pages 1 to 179 (NUQ part 6 and MPQs). Atfter page 179 the Part 5 questions started.

Answer is B – sending host

Failed the exam by a fine line

Premium Sims are still valid.
You need to study the composits also which I didnt. :(
A few qs Reworded, which through me off coz I was worried with time.

Reworded question, Br1, will HQR1 have the address of the link between HQR2 and Br1 in it routing table, if stub is configured on BR1????
I was not sure abt this. I said it will. Option are the show ip route outputs.

Had a few D&D, 5-6 all on this site

Hi, I had the same exam like @Zee, just abou made it with a score of 814, i have premier membership and would like to swop with someone with TShoot membership?

This exams is killing my pocket :(

Hi guys – passed yesterday (8xx). Labs: eigrp eval, ipv6 ospf, ospf sim.
Good luck to everyone!

@Tshoot

For the BR1 question, what answer did you choose?

@Zee , did you find any new questions which are not there in oct 19 dumps ? Taking exam tomorrow

I have premium account. I don’t know what’s in the Oct 19 dumps tho.
1 – 3 question maybe new from here, others reworded. Not sure becoz I need to go thru composits qs on this site.

Hi Guys, what’s the answer here?

Q – By default, which type of IPv6 address is used to build the EUI-64 bit format?
A. unique-local address
B. IPv4-compatible IPv6 address
C. link-local address
D. aggregatable-local address
E. MAC Adress

TIA!!

@Spidy

Q – By default, which type of IPv6 address is used to build the EUI-64 bit format?
A. unique-local address
B. IPv4-compatible IPv6 address
C. link-local address
D. aggregatable-local address
E. MAC Adress

Ans: C

Thanks @Crack_Route!

Q – What type of address OSPFv3 uses to form adjacency and send updates?
A. FF02::5
B. link-local
C. IPv4 address
D. IPv6 address multicast
Answer: A

Q – Which type of address does OSPFv3 use to form neighbor adjacencies and to send LSAs?
A. unicast IPv6 addresses
B. link-local addresses
C. multicast address FF02::5
D. unicast IPv4 addresses
Answer: C

Can someone please clarify the above questions, what really is the right answer?

Correction:
Q – What type of address OSPFv3 uses to form adjacency and send updates?
A. FF02::5
B. link-local
C. IPv4 address
D. IPv6 address multicast
Answer: B

Q – Which type of address does OSPFv3 use to form neighbor adjacencies and to send LSAs?
A. unicast IPv6 addresses
B. link-local addresses
C. multicast address FF02::5
D. unicast IPv4 addresses
Answer: C

Can someone please clarify the above questions, what really is the right answer?

Hello..

Guys anyone can guide here about the OCT pdf file. Is it enough to do pages 1 to 179 (NUQ part 6 and MPQs). Atfter page 179 the Part 5 questions started.

@Spidy
Which type of address does OSPFv3 use to form neighbor adjacencies and to send LSAs?
A. unicast IPv6 addresses
B. link-local addresses
C. multicast address FF02::5
D. unicast IPv4 addresses
Answer: C

Explanation
OSPFv3 uses the well-known IPv6 multicast addresses, FF02::5 to communicate with neighbors. The FF02::5 multicast address is known as the AllSPFRouters address. All
OSPFv3 routers must join this multicast group and listen to packets for this multicast group. The OSPFv3 Hello packets are sent to this address.
Note: All other routers (non DR and non BDR) establish adjacency with the DR and the BDR and use the IPv6 multicast address FF02::6 (known as AllDRouters address) to send LSA updates to the DR and BDR.
The answer ―link-local addresses‖ is also correct too. The reason is OSPFv3 routers use link-local address (FE80::/10) on its interfaces (as the source address) to send Hello packets to FF02::5 (as the destination address). So in fact this question is not clear and there are two correct answers here.
Note: The two IPv6 multicast addresses FF02::5 and FF02::6 have link-local scope.

Question 44
What type of address OSPFv3 uses to form adjacency and send updates?
A. FF02::5
B. link-local
C. IPv4 address
D. IPv6 address multicast
Answer: B

I passed today. 8xx

Lab: EIGRP Eval, IPV6 OSPF Virtual, OSPF Sim.
5 D&D from Premium (pay attention to all the d&d on Digitaltut)
Study MPQ, NUQ5, NUQ6 as well

Premium Account on this platform is enough for anyone to pass the exam. Though I saw about 5 quiz not on Digitaltut but I was able to handle them with my ExamLab dumps. I will say you should read Cisco materials to understand the concept. I actually combined that with Digitaltut Premium and VCE ExamLab dumps.

All the best.

Hi,
passed, I remember two questions I didnt see here.

a) NTP:
Picture with information that NTP Status: Clock is unsynchronized and date was wrong. Stratum is 16.
Answers were something like this:
1) Date is wrong.
2) NTP is not enabled
3) Current device is Master.
…do not remember rest.

b) RIPv2 topology, 3 routers in triangle topology. What command to use so we can access upper router via longer path (from R1 –> R2—>R3).
R3

R1 R2

About OSPF sim. Tolpology same as OSPF sim, but no stub or totally stub configuration. You need to ping from Portland to Lynaic.
You need to configure networks under OSPF on Amani and Portland.

Good luck

@GodSon
what do you mind by “5 D&D from Premium (pay attention to all the d&d on Digitaltut)” ?
can you explain us ? are the D&D incorrect ? or else ?

@TSHOOT give me your mail.. i can share thoot memb

Ping me for route premium
z f f r m o h d @ g m a i l. C o m

PRTG1 please give your email, i don’t want to share my company’s email as it is my personal email aswell

@Crack_Route
could you let us know after your exam tomorrow, thanks

Passed 300-101 today with 851 score
Sims- OSPF, IPV6 VL, EIGRP Simlet
D&D- had 6-8 of them all from this site. However the wording on 2 of them was a little different.
Had IPV6 VL Sim as my first question, almost lost my mind when that happened. SIM’s are the same as here with slightly different Network address and different OSPF Process ID’s.
If you study Most Popular Questions, New parts 5 & 6 and Composite quizzes you will be fine.
Did see about 3-5 new questions NOT on this site.
Good Luck, now on to T-Shoot before Feb. 23rd

Tshoot.. fwys333 hot com

@rs
what did you mean with compiste quizzes?
please, let me know about it

I was trying to practice on D&D in link provided on digitut, unfortunately I found in some question they gave false for not arrangement in sequence
for Example :

NAT64: (Answer in D&D)
+ Use Network-specific prefix
+ Modify session during translation

but if i put in different sequence

NAT64: (Answer in practice)
+ Modify session during translation
+ Use Network-specific prefix

how they calculate in exam ?

@GodSon can u share ExamLab dumps?

Guys,
Is it enough just to go through NU6 & MPQ?
Many questions in NU5 similar to NU6.
Please advise.

Guys please let me know which dump should I need to study for my Route exam which is in few days. I really appreciate if someone could help me on this. Thank you

Hi everyone!
Please tell me what information can I found in the premium membership?
What is the difference?
Thank you.

Passed today. I got the IPv6 OSFP sim, EIGRP Eval, OSPF sim, EIGRP Stub.
Contained mostly questions from NUQ5, NUQ 6 and MPQ which is what i studied as per what others have said. Some questions were different but concept was the same so read and understand the explanations and you will be right.
@Oscar Premium gives you access the all the above so $19 is worth it. Not much time left so better hurry.