Share your ROUTE v2.0 Experience

Passed yesterday 9xx
Only 1 new question, ALL THE QUESTIONS WERE HERE!!
Guys, it is the best time to take the route exam, it’s very stable for now!
Advise :
Do and do re-do all the Composite Quizzes (15)
Do and do re-do all the Most Popular Questions (10)
Do and do re-do all the New Questions (2)
Do and do re-do all the Labs
Do and do re-do all the Drag and Drop
Just organize yourself, set your daily and weekly tasks, the more you do this and repeat, the quicker you will become , and during you will laugh during the exam!
Good luck everyone, just work hard for few days, it’s worth it!

Today Pass exam. All labs and questions are digitaltut
Virtual Links lab- maybe different ip address Process Id ospf.but already configured R1and R4 loopback 0 ipv6 route ospf 1 are 0 or ..
Ospf Sim. Changes Process ID ip addrsss. And copy running-config startul-config wotking
Eigrp Evalution sim same

Drag and drop same only 1 drag drop was different .
Questions are same
Thanks for all digitaltut users
Drag drop and labs read clearly beacuse i think these questions give more point
THANKS

@Hiko

Can you share the dumps you used please

@ KIKO Thanks for the tip. Hey I heard the IP’s and areas changed on the Sim to recall the Areas and IP ?

@ Hiko Do you recall the IP and Area changed on the Sims? Take exam in 2 weeks. I Heard there was a new OSPF Sim is that correct ?

@ Hiko Congrats

For the OSPF SIM, now that the IP address are different in the exam, how did you calculate the network address to use? in the example we have “network 192.168.4.4 0.0.0.3 area 1”

Took the exam today and passed easily. Study EVERYTHING on this site and you will be ok. Thanks digitaltut!! And no dont ask me to send membership cheap ***!!

Anyone see the frame relay D&D in the actual exam?
im struggling to get through all the Composite Quizzes (15), its such a lot. but im pushing through.
Thank u for the insight @Kiko and all who has commented after Exam.

Nick, did you just study questions on MPQ, NUQ 5 and 6?? or all the composite quizzes too??

thanks!!

I studied all the individual quizzes and MPQ, NUQ, 5,6. Took me about 2 months. I know you dont have that time but 3/4 of test questions come from NUQ 5,6. Hope this helps. No point is putting questions i had cause it is all the same from above. 3 DD NAT64-NPT, AAA, 2 features each and Frame Relay. LAbs were the same.

@ekva please share your email

@El Cisco Guys yes io address and process ID may be change .
Changed in my exam

@Lukas only number may be change but again you use same rule
As “network 192.168.4.4 0.0.0.3 area 1”

@Hiko my email id is beulsins_sonny@yahoo. fr
Thank you very much for your help.

Guys can you share latest new questions?

Please update the new frame relay dnd and all other new ques

pass with 87x

lab same
ospf virtual-link
ospf sim
eigrp eva

7 drag and drop out of 55 question aaa (with new wording)
MPP, other 5 from this dumps,

my 80 question collection (35 questions appear in my exam) excluding

new 5, new 6 ,(mp question 10) and (composite 1,2)

@29jan220 any new questions other from digitaltut?

5,6 question from composite drop your whatssapp i will share my collection

@29jan2020 can you upload your materials on mediafire site? I have not whatsapp.

@29jan2020 can you upload your materials on mediafire site?

Hello folks,

Passed today with 9xx.

55 questions total.

Labs – OSPF sim – same as here, different IP addresses, process ID, areas
OSPF virtual link – same as here
EIGRP Eval – same as here

DnD: 5 or 6 total : COPP/MPP, AAA (new questions 5), DMVPN, Frame-relay multipoint, question 11 (new questions 6)

New question regarding EIGRP summarization of external routes (don’t remember exact)
New question regarding IP SLA with tracking of default route
And may be 1 or 2 more that I haven’t seen before

Question about filtering only one route towards DHCP server (same topology as question for passive-interfaces). It was not with passive interfaces, was with distribute-list with ACL

All you need is premuim account for this website (19 dollars are nothing)
Just check as more as you can all of the questions (old, MPQ, New 5 and 6) and you will pass for sure
It took me around 50 minutes to pass, I was sure that everything is going as it suppose to

Thank you digitaltut! See you on TSHOOT.

Good luck to every one!

guys I have a question about OSPF Sim, Amani router have by default area 0, no I need to remove this command?
Amani(config)#router ospf 1
default conf->Amani(config-router)#network 192.168.72.4 0.0.0.3 area 0
new command->Amani(config-router)#network 192.168.4.4 0.0.0.3 area 1
new command->Amani(config-router)#area 1 stub no-summary

Yes

Guys, what’s the right answer here?

Which two areas does OSPF send a summary route by default ? (Choose two)
A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal

Some say it’s AD, others say it’s CD.

@ Spidy, correct ans is C& D. Both, Stub and Totally stubby.

taking my test today. Wish me luck, will uodate later tonight how it went.

@CableGuy good luck man. Let us know.

@CableGuy good luck

Please could someone help with this question and explain?

Q- Which device determines the MSS?
A- sending host’s gateway
B- sending host
C- receiving host’s gateway
D- receiving host

@AKA

Q- Which device determines the MSS?
A- sending host’s gateway
B- sending host
C- receiving host’s gateway
D- receiving host

Ans : B

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16-9/configuration_guide/ip/b_169_ip_3650_cg/configuring_tcp_mss_adjustment.pdf

Many thanks buddy.

OK I passed the exam. Total of 55 questions including the 3 sims. OSPF, OSPFv6, EIGRP. All the same the OSPF was OSPF process 90 and area 25 with the 0.0.0.3

Drag and drops were : NAT64,NPTv6,well known stateful, network specific stateful

Drag and drop the steps in the NAT process for IPv4-initiated packers from the left into the correct sequence on the right. 4 steps . (drag and drop section 2 question 2)

3 rd drag and drop was the frame relay where you have to configure serial point to point connection. ABCD fill in the blanks
Think there was a 4th but cant remember.

Had about 10 new questions i never seen before. I went through every question on here. A lot of AAA questions. One AAA question ask something about if it need more info how would it respond? A continue
B connect
C?
D?

The ipv6 EIGRP 100 question about HQ r1 and HQ R2 and BR1 diagram asked something like to ensure HQ R1 receives……choices were 2 ipv4 commands (wrong) and 2 ipv6 command no stud or stub receive only.

New question about IBPG redistributed into OSPF. Choices were different command steps had to pick one.

I would definitely know NU 5,6 and MPQ. Read a lot about AAA cause most the 10 new questions about 5 were AAA related. Good luck and thanks digitaltut!! Hopefully in the future there will be the enterprise link for the specialty exams.

Guys, what’s the right answer here?

Which two areas does OSPF send a summary route by default ? (Choose two)
A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal

Some say it’s AD, others say it’s CD.

Explanation:
Summary is generated by ABR which will be type 3(Summay LSA).As we know that in Stuby and not so stuby area Type 5 LSA is not allowed but type 3 can be send.
While in Totaly stubby or totaly no so stubby Type 3,4,5 all is not allowed.So no summay in totally stubby area.
So Answer AD is correct

AD is correct. Totally stubby 3,4,5 not allowed. It is efficient as possible.

@CableGuy did u use other dumps?

no just this one.

I just went through 5,6 questions that were on my test along with the drage and drops above. If I have time i will post more later. Just know the concepts and you will be fine. Also know the multicast ipv6 address FF00::. was a multiple choice question. Good luck and see you guys in the future forums!! PEACe

Which two steps must you perform to allow access to a device when the connection to a remote TACACS+ authentication server fails? (Choose two)

A. Include the local keyword in the AAA configuration
B. Configure a local username and password on the device
C. Configure the device to accept Telnet and SSH connections
D. Configure accounting to reference the log of previously authenticated connections
E. Remove the aaa new model command from the global configuration

Answer: A B
network administrator is attempting to configure IP SLA to allow one time stamp to be logged when a packet arrives on the interface and one time stamp to be logged when a packet leaves the interface. Which IP SLA accuracy tool enables this functionality?

A. Trap
B. RTT
C. Responder
D. Trigger
E. Logging

Answer: C
Which functions are included in the two-message rapid exchange that a DHCPv6 client can receive from a server?

A. solicit and reply
B. advertise and request
C. solicit and request
D. advertise and reply

Answer: A
You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?

A. ppp authentication ms-chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2 callin
D. ppp authentication chap callin
E. ppp authentication ms-chap-v2

Answer: C
What is the DHCP option to download TFTP info to a Cisco phone?

A. option 57
B. option 82
C. option 66
D. option 68

Answer: C
What type of address OSPFv3 uses to form adjacency and send updates?

A. FF02::5
B. link-local
C. IPv4 address
D. IPv6 address multicast

Answer: B
What is the task you must perform when configuring SSH? (Choose two)

A. Configure TACACS+
B. Configure hostname
C. Generate RSA key
D. Disable telnet

Answer: B C
Refer to the exhibit. PC A is unable to send data to PC B because the DF bit is sent on PC A. Which action corrects the problem?

DF_bit_MSS.jpg

A. Lower the MSS on PC A.
B. Configure QoS on the network.
C. Configure PMTUD on the network.
D. Configure a GRE tunnel between R1 and R3.

Answer: C
Which two effects of asymmetric routing are true? (Choose two)

A. unicast flooding
B. uRPF failure
C. errdisabling of ports
D. port security violations
E. excessive STP reconvergence

Answer: A B
When configuring DHCP on a Cisco router what is the function of DHCP Option 82?

A. wireless access point registration to the DHCP server
B. to be an IP DHCP relay agent
C. dynamic DHCP ARP inspection
D. IP DHCP snooping
E. Cisco phone registration to the DHCP server

Answer: B
What DHCP Option must be set to allow static routes assigned?

A. Option 13
B. Option 33
C. Option 66
D. Option 67

Answer: B
You want the device on your network to summarize routes between ospf and different autonomous systems. Which action must you take?

A. Configure the summary-address command on the ASBR
B. Configure the summary-address command on the ABR
C. config the area range command on the ABR
D. config the area range command on the ABBR

Answer: A

hey guys can you send me the dumps please PDF. i’m looking for the Route, Switch and the troubleshoot please. thank you in advance
noor.altaie73 # gmail . com

Hey guys, sorry for a dumb question. I was wondering if all of the questions (premium member) are in the specific categories and in the NU, MPQ, etc? What is with the PDF in the ROUTE FAQ & Tips? Does it have any additional questions?

@New guy,,, yes new updated questions in premium member account.

@Kyle Coleman, Can u share 894q

@kyle coleman

can you share 894q please please.

We need it

beulsins_sonny@yahoo. fr

thanks

How did you manage to get labs that have not been referenced for months?
are you lying?

Today passed the 300-101 exam, thanks digitaltut for Topic based questions and Simulators.

So…Passed not so long ago
Thanks Digitaltut for their help. Used Premium
Labs are OSPF, OSPFv6, EIGRP
Questions mostly same. Maybe some I just didn’t remember.
Definitely should learn MPQ,NU5-6. And also recommend to learn old questions.

Best luck to everyone =)

Taking test tomorrow morning, i’ll let ya’ll know how it goes, been studying my ass off, i’m nervous

good luck mate!!

Passed today, thanks TUT. Total 55 questions, mostly from MPQ, NUQ5 & 6.

3 Labs:
EIGRP Evaluation – Same
IPv6 OSPF Virtual Link – Same
OSPF Sim – Router names, IPs (192.168.6.4/30), area ID (42) and ospf process ID (58) were different, but same concept.

About 4 D&D:
MPQ Q116, MPQ Q206, MPQ Q245 (can’t remember the other one)

Got a very few new questions (Or may be I missed them while going through the dumps).

One question was about redistributing iBGP routes into OSPF. Answers were like,

1- use “redistribute bgp” in global configuration mode
2- use “bgp redistribute-internal” under ospf routing process
3- use “bgp redistribute-internal” under ospf and bgp routing processes
4- use “bgp redistribute-internal” under bgp routing process

Also got some modified questions, so better be vigilant.

For example, NUQ6 Q50 had been changed from “between ospf and different autonomous systems” to “between different ospf areas”

Good luck!

Other D&D was MPQ Q249